Ok! Thanks!
> To: dynebolic@???
> Date: Tue, 29 Mar 2011 13:44:31 +0000
> From: giftmischer_01@???
> Subject: Re: [dyne:bolic] Driver
>
> Hi & just create a /etc/rc.local file with your changes.
>
> Cheers,
> Gifti
>
>
> On Tue, 29 Mar 2011 11:27:08 -0000, Pablo Ferreira
> <pelado_silveira@???> wrote:
>
> >
> > That`s seem to be I good idea, I'm not with that pc in this moment, but
> > I'll try the next time I work with that computer. If it works, Have I to
> > write it like a script in any of the rc.d folders to make the change
> > persistant?
> >
> > Thank's, I'll tell what happen.
> >
> > Thank you very much.
> >
> > Pablo
> >
> >> Date: Mon, 28 Mar 2011 07:55:58 -0700
> >> From: ragriffi@???
> >> To: dynebolic@???
> >> Subject: Re: [dyne:bolic] Driver
> >>
> >> Perhaps you need to force db to load the kernel module for the C-Media
> >> card. The snd module in the ALSA message won't be available if the
> >> kernel module for the card doesn't load. Try issuing this command:
> >>
> >> modprobe snd-cmipci
> >>
> >> Then see if you get sound.
> >>
> >> This article specifically mentions a related C-Media card:
> >> http://spot.river-styx.com/viewarticle.php?id=14
> >>
> >> Good luck,
> >> -Richard
> >>
> >> On 03/27/2011 02:57 PM, Pablo Ferreira wrote:
> >> >
> >> > Hola, sigo molestando!
> >> >
> >> > In the directory
> >> >
> >> > /mnt/hd1/1/dyne/SDK/sys/share/alsa/cards I found the
> >> CMI8338.conf which says "Configuration for the CMI 8338/8738 Chip ...."
> >> >
> >> > But when I execute alsaconf -p CMI8338 or CMI8738 the output is
> >> "modinfo: could not find module snd"
> >> >
> >> > The output for lspci is:
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > 00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A]
> >> Chipset Host Bridge
> >> > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> >> > 00:09.0 Multimedia audio controller: C-Media Electronics Inc
> >> CM8738 (rev 10)
> >> > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
> >> 1.1 Controller (rev 80)
> >> > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
> >> 1.1 Controller (rev 80)
> >> > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
> >> 1.1 Controller (rev 80)
> >> > 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> >> > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> >> > 00:11.1 IDE interface: VIA Technologies, Inc.
> >> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> >> > 00:11.6 Communication controller: VIA Technologies, Inc. AC'97
> >> Modem Controller (rev 80)
> >> > 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
> >> [Rhine-II] (rev 74)
> >> > 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378
> >> [S3 UniChrome] Integrated Video (rev 01)
> >> >
> >> >
> >> >
> >> > When i execute alsaconf the output is:
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > modinfo: could not find module snd
> >> > modinfo: could not find module snd
> >> > modinfo: could not find module snd
> >> > /usr/sbin/alsaconf: line 681: /usr/bin/awk: cannot execute binary
> >> file
> >> >
> >> >
> >> > My knowledgment is very limited at this moment, i expect someone can
> >> help me. thanks
> >> >
> >> > Saludos
> >> >
> >> >
> >> > _______________________________________________
> >> > dynebolic mailing list
> >> > dynebolic@???
> >> > http://lists.dyne.org/mailman/listinfo/dynebolic
> >> >
> >> _______________________________________________
> >> dynebolic mailing list
> >> dynebolic@???
> >> http://lists.dyne.org/mailman/listinfo/dynebolic
> >
> > _______________________________________________
> > dynebolic mailing list
> > dynebolic@???
> > http://lists.dyne.org/mailman/listinfo/dynebolic
> _______________________________________________
> dynebolic mailing list
> dynebolic@???
> http://lists.dyne.org/mailman/listinfo/dynebolic
::
Re: [dyne:bolic] Driver
