Hi & just create a /etc/rc.local file with your changes.
Cheers,
Gifti
On Tue, 29 Mar 2011 11:27:08 -0000, Pablo Ferreira
<pelado_silveira@???> wrote:
>
> That`s seem to be I good idea, I'm not with that pc in this moment, but
> I'll try the next time I work with that computer. If it works, Have I to
> write it like a script in any of the rc.d folders to make the change
> persistant?
>
> Thank's, I'll tell what happen.
>
> Thank you very much.
>
> Pablo
>
>> Date: Mon, 28 Mar 2011 07:55:58 -0700
>> From: ragriffi@???
>> To: dynebolic@???
>> Subject: Re: [dyne:bolic] Driver
>>
>> Perhaps you need to force db to load the kernel module for the C-Media
>> card. The snd module in the ALSA message won't be available if the
>> kernel module for the card doesn't load. Try issuing this command:
>>
>> modprobe snd-cmipci
>>
>> Then see if you get sound.
>>
>> This article specifically mentions a related C-Media card:
>> http://spot.river-styx.com/viewarticle.php?id=14
>>
>> Good luck,
>> -Richard
>>
>> On 03/27/2011 02:57 PM, Pablo Ferreira wrote:
>> >
>> > Hola, sigo molestando!
>> >
>> > In the directory
>> >
>> > /mnt/hd1/1/dyne/SDK/sys/share/alsa/cards I found the
>> CMI8338.conf which says "Configuration for the CMI 8338/8738 Chip ...."
>> >
>> > But when I execute alsaconf -p CMI8338 or CMI8738 the output is
>> "modinfo: could not find module snd"
>> >
>> > The output for lspci is:
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > 00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A]
>> Chipset Host Bridge
>> > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
>> > 00:09.0 Multimedia audio controller: C-Media Electronics Inc
>> CM8738 (rev 10)
>> > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
>> 1.1 Controller (rev 80)
>> > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
>> 1.1 Controller (rev 80)
>> > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
>> 1.1 Controller (rev 80)
>> > 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
>> > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
>> > 00:11.1 IDE interface: VIA Technologies, Inc.
>> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
>> > 00:11.6 Communication controller: VIA Technologies, Inc. AC'97
>> Modem Controller (rev 80)
>> > 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
>> [Rhine-II] (rev 74)
>> > 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378
>> [S3 UniChrome] Integrated Video (rev 01)
>> >
>> >
>> >
>> > When i execute alsaconf the output is:
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > modinfo: could not find module snd
>> > modinfo: could not find module snd
>> > modinfo: could not find module snd
>> > /usr/sbin/alsaconf: line 681: /usr/bin/awk: cannot execute binary
>> file
>> >
>> >
>> > My knowledgment is very limited at this moment, i expect someone can
>> help me. thanks
>> >
>> > Saludos
>> >
>> >
>> > _______________________________________________
>> > dynebolic mailing list
>> > dynebolic@???
>> > http://lists.dyne.org/mailman/listinfo/dynebolic
>> >
>> _______________________________________________
>> dynebolic mailing list
>> dynebolic@???
>> http://lists.dyne.org/mailman/listinfo/dynebolic
>
> _______________________________________________
> dynebolic mailing list
> dynebolic@???
> http://lists.dyne.org/mailman/listinfo/dynebolic
::
Re: [dyne:bolic] Driver
