:: Re: [dyne:bolic] Driver
Top Page
Delete this message
Reply to this message
Author: Pablo Ferreira
Date:  
To: dynebolic
Subject: Re: [dyne:bolic] Driver

Hello again /Hola de nuevo

i'm still trying to make it work but without luck. I`ve realised that the module is loaded, i saw that was loaded in the when booting the system and i loaded again with modprobe snd-cmipci, but don't detect it.  The output for the lspci is: "> >> >    00:09.0 Multimedia audio controller: C-Media Electronics Inc", perhaps don't realise that is an audio card. when i put on the terminal alsaconf -m snd-cmipci, the script take more time to execute but the result is the same.


As I saw in some mail i look for the files in /dev/snd, there isn't anyone which starts with dsp.
On the /dev directory i found adsp, adsp0, adsp1,adsp2,adsp3 and 4 , adps was a link to adsp0 i deleted and i created a new one to adsp1, new mixer options appeared on the volume menu, but the system hang up.

Anybody has some idea?

thank you ....cheers

Todavía estoy tratando de hacer andar el audio, me di cuenta de que el mòdulo snd-cmipci esta cargado, de todas formas lo volvi a cargar, pero sigue sin detectar la placa, por ahí el sistema no se da cuenta de que el dispositivo > >> >    00:09.0 Multimedia audio controller: C-Media Electronics Inc> >> CM8738 (rev 10), es la placa de audio. TRaté con alsaconf -m snd-cmipci, pero tampoco funcionò a pesar de que tard´p más tiempo en ejecutarse el script.


Ví un mail en que se proponía cambiar el link /dev/dsp de dps0 dsp1, pero no tengo esos dispositivos ni en /dev/sound ni en /dev. En cambio hay otros que son adsp, adsp1,adsp2, ..4 y lo que hice fue cambiar el link adsp de adsp0 a adsp1, lo que pasó fue que aparecieron nuevas opciones de mixer en el control del volumen, pero la máquina se colgó.

Alguien tiene alguna idea de como resolver el problema?

Muchas gracias

Saludos


Pablo




> To: dynebolic@???
> Date: Tue, 29 Mar 2011 13:44:31 +0000
> From: giftmischer_01@???
> Subject: Re: [dyne:bolic] Driver
>
> Hi & just create a /etc/rc.local file with your changes.
>
> Cheers,
> Gifti
>
>
> On Tue, 29 Mar 2011 11:27:08 -0000, Pablo Ferreira
> <pelado_silveira@???> wrote:
>
> >
> > That`s seem to be I good idea, I'm not with that pc in this moment, but
> > I'll try the next time I work with that computer. If it works, Have I to
> > write it like a script in any of the rc.d folders to make the change
> > persistant?
> >
> > Thank's, I'll tell what happen.
> >
> > Thank you very much.
> >
> > Pablo
> >
> >> Date: Mon, 28 Mar 2011 07:55:58 -0700
> >> From: ragriffi@???
> >> To: dynebolic@???
> >> Subject: Re: [dyne:bolic] Driver
> >>
> >> Perhaps you need to force db to load the kernel module for the C-Media
> >> card. The snd module in the ALSA message won't be available if the
> >> kernel module for the card doesn't load. Try issuing this command:
> >>
> >> modprobe snd-cmipci
> >>
> >> Then see if you get sound.
> >>
> >> This article specifically mentions a related C-Media card:
> >> http://spot.river-styx.com/viewarticle.php?id=14
> >>
> >> Good luck,
> >> -Richard
> >>
> >> On 03/27/2011 02:57 PM, Pablo Ferreira wrote:
> >> >
> >> > Hola, sigo molestando!
> >> >
> >> > In the directory
> >> >
> >> > /mnt/hd1/1/dyne/SDK/sys/share/alsa/cards         I found the  
> >> CMI8338.conf which says "Configuration for the CMI 8338/8738 Chip ...."

> >> >
> >> > But when I execute alsaconf -p CMI8338 or CMI8738 the output is
> >> "modinfo: could not find module snd"
> >> >
> >> > The output for lspci is:
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >    00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A]  
> >> Chipset Host Bridge
> >> >    00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> >> >    00:09.0 Multimedia audio controller: C-Media Electronics Inc  
> >> CM8738 (rev 10)
> >> >    00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB  
> >> 1.1 Controller (rev 80)
> >> >    00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB  
> >> 1.1 Controller (rev 80)
> >> >    00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB  
> >> 1.1 Controller (rev 80)
> >> >    00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> >> >    00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> >> >    00:11.1 IDE interface: VIA Technologies, Inc.  
> >> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> >> >    00:11.6 Communication controller: VIA Technologies, Inc. AC'97  
> >> Modem Controller (rev 80)
> >> >    00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102  
> >> [Rhine-II] (rev 74)
> >> >    01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378  
> >> [S3 UniChrome] Integrated Video (rev 01)

> >> >
> >> >
> >> >
> >> > When i execute alsaconf the output is:
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >    modinfo: could not find module snd
> >> >    modinfo: could not find module snd
> >> >    modinfo: could not find module snd
> >> >    /usr/sbin/alsaconf: line 681: /usr/bin/awk: cannot execute binary  
> >> file

> >> >
> >> >
> >> > My knowledgment is very limited at this moment, i expect someone can
> >> help me. thanks
> >> >
> >> > Saludos
> >> >
> >> >                       
> >> > _______________________________________________
> >> > dynebolic mailing list
> >> > dynebolic@???
> >> > http://lists.dyne.org/mailman/listinfo/dynebolic
> >> >
> >> _______________________________________________
> >> dynebolic mailing list
> >> dynebolic@???
> >> http://lists.dyne.org/mailman/listinfo/dynebolic
> >                       
> > _______________________________________________
> > dynebolic mailing list
> > dynebolic@???
> > http://lists.dyne.org/mailman/listinfo/dynebolic
> _______________________________________________
> dynebolic mailing list
> dynebolic@???
> http://lists.dyne.org/mailman/listinfo/dynebolic