On Fri, Sep 04, 2020 at 09:19:42PM -0500, golinux@??? wrote:
> === START OF READ SMART DATA SECTION ===
> SMART Status command failed: scsi error medium or hardware error (serious)
> SMART overall-health self-assessment test result: PASSED
> Warning: This result is based on an Attribute check.
You said this is a USB attached drive. That probably showed up
because the USB bridge doesn't support passing a given SMART
command(s) to the drive.
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
--- snip ---
> 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 1
So we know that one sector was reallocated. Whether that happened when
e2fsck attempted to write to it, or earlier, we don't know.
> 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
> 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
Other than that one sector, the rest of the drive looks to be useable
so far.
> SMART Self-test log structure revision number 1
> Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
> # 1 Extended offline Completed without error 00% 55 -
Again, that confirms to me the drive reallocated one bad sector, and
the rest of it seems to be OK so far.
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
You asked about this in an earlier message. The selective test portion
is used to report the status of the automatic testing the drive does
by itself if that's enabled, and your smartctl output shows that
automatic self tests are enabled on your drive. All the above says is
that the drive isn't running automatic self tests right now, so nothing to
worry about here.
Greg
--
web site:
http://www.gregn.net
gpg public key:
http://www.gregn.net/pubkey.asc
skype: gregn1
(authorization required, add me to your contacts list first)
If we haven't been in touch before, e-mail me before adding me to your contacts.
--
Free domains:
http://www.eu.org/ or mail dns-manager@???