:: Re: [DNG] Tochpad scrolling on devu…
Página superior
Eliminar este mensaje
Responder a este mensaje
Autor: aitor_czr
Fecha:  
A: fuumind, Dng
Asunto: Re: [DNG] Tochpad scrolling on devuan

Hi fuumind,

On 04/26/2016 10:32 PM, aitor_czr <aitor_czr@???> wrote:
> On 04/26/2016 08:04 PM, fuumind<fuumind@???> wrote:
>>> >>Hi fuumind,
>>>> >> >
>>>> >> >On 04/26/2016 02:00 PM, fuumind<fuumind@???> wrote:
>>>>>> >>> >>Thanks for the link!
>>>>>> >>> >>
>>>>>> >>> >>My kernel went from 3.16 to 4.4 but still no scrolling.
>>>>>> >>> >>
>>>>>> >>> >>also:
>>>>>> >>> >>
>>>>>> >>> >>lsmod|grep -iE "apple|cyapa|sermouse|synap|psmouse|vsxx|bcm"
>>>>>> >>> >>btbcm                  16384  1 btusb
>>>>>> >>> >>bluetooth             516096  24 bnep,btbcm,btrtl,btusb,btintel
>>>>>> >>> >>psmouse               122880  0

>>>>>> >>> >>
>>>>>> >>> >>And freeciv looks a lot nicer as well:)
>>>>>> >>> >>
>>>>>> >>> >>Maybe there are some configuration changes needing to be done for X
>>>>>> >>> >>after all.
>>>> >> >
>>>> >> >The configuration of the kernel for the touchscreens drivers is in the
>>>> >> >*Input Device Drivers*.
>>>> >> >
>>>> >> >Run "make menuconfig", and go to:
>>>> >> >
>>>> >> >Device drivers >> Input Device support >> Touchscreens
>>>> >> >
>>>> >> >HTH,
>>>> >> >
>>>> >> > Aitor.
>> >Did you try loading the "hid-multitouch.ko" module. This module is
>> >located in "/lib/modules/ *kernel_version* /kernel/drivers/hid".
>> >You can load it typing:
>> >
>> >/sbin/modprobe hid-multitouch
>> >
>> >You can add this command to "/etc/rc.local"
>> >
>> >Now type "lsmod" and it will appear in the list of the loaded modules.
>> >
>> >Cheers,
>> >
>> >     Aitor.
> Sorry, you are talking about*touchpads*  and i'm talking about
> *touchscreens*

>
>     Aitor.


I think that you need evdev, either builtin or as a module. In
menuconfig this is at:

Device drivers >> Input Device support >> Event interface

Now make sure your Synaptics touchpad is functioning. Run:

cat /proc/bus/input/devices

And you will get something like this in the list (note of the *Handlers*
line):

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

[ ... etc ... ]

If so, try doing:

synclient TouchpadOff=1

for enabling the touchpad, and:

synclient TouchpadOff=0

for disabling it.

Cheers,

Aitor.