:: Re: [DNG] Removing of systemd cause…
Página superior
Eliminar este mensaje
Responder a este mensaje
Autor: Antonio Trkdz.tab
Fecha:  
A: Daniel Reurich, Dng
Asunto: Re: [DNG] Removing of systemd causes removal of CUPS
Hi Daniel,

thank you for your reply.
I suspected it wasn't a good
idea.

Do you know which is the correct -t argument to pass to apt-get in case I
would like to install from angband on a one off basis?
I tried -t nosystemd and it didn't work....

Regards.

Antonio

On Tue, Nov 24, 2015 at 6:09 PM, Daniel Reurich <daniel@???>
wrote:

> Hi Antonio,
>
> I'm working my way towards fixing the issue with cups. Feel free to
> use angband.pl's if you want to, but I wouldn't recommend keeping
> angband.pl repo active otherwise.
>
> Regards,
>         Daniel

>
> On 25/11/15 04:26, Antonio Trkdz.tab wrote:
> > Hi,
> >
> > Thank you all for your replies.
> >
> > I add the angband.pl <http://angband.pl> repository to sources.list.
> > I noticed that it is getting prioritized over the main devuan repository.
> > Is it OK to keep it active for all the updates (not only CUPS)?
> >
> > Best,
> > Antonio
> >
> >
> > On Fri, Nov 20, 2015 at 4:11 PM, Rainer Weikusat
> > <rainerweikusat@??? <mailto:rainerweikusat@virginmedia.com>>
> > wrote:
> >
> >     "Antonio Trkdz.tab" <antoniotrkdz@???
> >     <mailto:antoniotrkdz@gmail.com>> writes:
> >     > I recently upgraded to Devuan from Wheezy.
> >     > I investigate the possibility to remove any trace of systemd from
> my
> >     > system, but
> >     > in the list of packets to be purged there is also CUPS and a bunch
> of its
> >     > dependencies.
> >     >
> >     > Maybe this has been already covered in other discussion, but I
> would like
> >     > to know if there is a work around to keep CUPS or if you can
> suggest an
> >     > alternative printing system.

> >
> >     I made a half-hearted attempt to setup CUPS when I got my present
> >     printer but aborted that on the grounds of "Dammit, I just want print
> >     something!" after ca 20 minutes. I'm currently using lprng (as I have
> >     done since at least 1998) and it works fine for me (as it always
> did).
> >     _______________________________________________
> >     Dng mailing list
> >     Dng@??? <mailto:Dng@lists.dyne.org>
> >     https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng

> >
> >
> >
> >
> > _______________________________________________
> > Dng mailing list
> > Dng@???
> > https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
> >
>
>
> --
> Daniel Reurich
> Centurion Computer Technology (2005) Ltd.
> 021 797 722
>
>