:: Re: [dyne:bolic] DNS problem?
Top Page
Delete this message
Reply to this message
Author: Kristofer Dale
Date:  
To: dynebolic
Subject: Re: [dyne:bolic] DNS problem?

(from Richard Hamel-Smith, 02 Dec 06)

>Now, is the Ethernet card working? Does 'dmesg|grep -i eth' give ANY
>ERRORS at all?
>For instance, is the IRQ used by something else as all?


>Does 'lspci' should the card as recognised?


Here's the output:

[d:b] ~ #lspci
17:13
00:00.0 Host bridge: ALi Corporation M1541 (rev 04)
00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev 04)
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:03.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin
IV/V/V+] (rev c3)
00:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip
compatible 10/100 Ethernet (rev 31)
00:0a.0 Multimedia audio controller: Aureal Semiconductor AU8810 Vortex
Digital Audio Processor (rev 02)
00:0b.0 Multimedia video controller: Zoran Corporation ZR36057PQC Video
cutting chipset (rev 02)
00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c1)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326
5598/6326 (rev 0b)
[d:b] ~ #lspci
17:30
00:00.0 Host bridge: ALi Corporation M1541 (rev 04)
00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev 04)
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:03.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin
IV/V/V+] (rev c3)
00:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip
compatible 10/100 Ethernet (rev 31)
00:0a.0 Multimedia audio controller: Aureal Semiconductor AU8810 Vortex
Digital Audio Processor (rev 02)
00:0b.0 Multimedia video controller: Zoran Corporation ZR36057PQC Video
cutting chipset (rev 02)
00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c1)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326
5598/6326 (rev 0b)
[d:b] ~ #dmesg|grep -i eth
17:40
eth0: Davicom DM9102/DM9102A rev 49 at 0001b800, 00:80:AD:78:F6:87, IRQ 3.
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
[d:b] ~ #lspci|grep -i eth
17:40
00:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip
compatible 10/100 Ethernet (rev 31)
[d:b] ~ #
17:43


If this was a hardware issue, I think it would cause the same problem with
v1.4.1, but it doesn't. I'm not changing a thing in either computer except
the version of dyne, v.1.4.1 works fine, none of the v.2x series. Since
it's a problem with both computers, I'm now wondering if there is something
about the gateway that is causing the problem. Does anyone know if there is
something different in the way v.2.x handles the LAN compared to v.1.4.1?

.
.        _o              Kristofer Dale,
.     _ \<,_             ragged individualist,
.    ( )/ ( )            statistic at large...
.


p.s. Learn and live, http://www.vitaletherapeutics.org