Tue, 30 Apr 2024 19:49:09 +0200 - aitor <aitor_czr@???>:

> Hi,
>
> On 30/4/24 19:42, al3xu5 via Dng wrote:
>
> > Yes... I had /etc/network/interfaces with:
> >
> > auto eth0
> > allow-hotplug eth0
> > iface eth0 inet dhcp
> >
> > But dhcpcd refuse to start with this error:
> >
> > Not running dhcpcd because /etc/network/interfaces ... failed!
> > defines some interfaces that will use a DHCP client ... failed!
> >
> > So I have this problem: if /etc/network/interfaces is empty (without eth0)
> > then dhcpcd works, and if I set `iface eth0 inet dhcp` then dhcpcd doesn't
> > start and simple-netaid (ifdown) cannot manage the eth0 interface...
> >
> > I wouldn't know how to handle it...
> >
> > Maybe I should disable the dhcpcd service? What else?
>
> Are you sure that eth0 is not being renamed?

Yes. Not renamed.

$ ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500
qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether
...


alexus


--
The only way humans have learned to survive brings them to extinction.
______________________________________________________________________
Public GPG/PGP key: 8FC2 3121 2803 86E9 F7D8 B624 DA50 835B 2624 A36B