You are using almost the same kernel as me. Can you issue this command ?
and give me the output.
grep CONFIG_IP_NF_NAT= /boot/config-`uname -r`
I don't have this entry in my kernel config file,but I suspect that I
should add it from scratch.
On Wed, Aug 16, 2023 at 1:47 AM tempforever <dev1@???> wrote:
> OK, not sure if that's the problem then. I was having an iptables issue
> on 4.19; now am on 5.10
>
> # modinfo iptable_nat
> filename:
> /lib/modules/5.10.74-v8/kernel/net/ipv4/netfilter/iptable_nat.ko
> license: GPL
> srcversion: 3FAE187928D3CBBEEBC7690
> depends: ip_tables,nf_nat
> intree: Y
> name: iptable_nat
> vermagic: 5.10.74-v8 SMP preempt mod_unload modversions aarch64
> sig_id: PKCS#7
> signer: Build time autogenerated kernel key
> sig_key: 11:B1:1B:6F:2B:12:D5:3C:06:17:30:26:15:FC:54:3D:EC:3F:9C:1A
> sig_hashalgo: sha1
> signature: (several lines of signature)
>
>
> Mario Marietto wrote:
>
> ---> Just curious, what is your kernel version? I had a similar issue
> trying to set up a wireguard on an old kernel, aarch64 machine.
>
> 5.4.244 (I can't use a better version of qemu,the kvm support for armhf
> has been removed on 5.7 kernels).
>
> I have recompiled the kernel with the ip tables and bridge enabled for the
> 2 times. It seems that the mouse,keyboard and trackpad now work. But let's
> see if the iptables works :
>
> root@devuan:~# iptables -t nat -A POSTROUTING -o mlan0 -j MASQUERADE
>
> iptables v1.8.7 (legacy): can't initialize iptables table `nat': Table
> does not exist (do you need to insmod?) ; Perhaps iptables or your kernel
> needs to be upgraded.
>
> root@devuan:~# sudo depmod
>
> root@devuan:~# modinfo iptable_nat
>
> modinfo: ERROR: Module iptable_nat not found.
>
> root@devuan:~# grep CONFIG_NF_TABLES= /boot/config-`uname -r`
> CONFIG_NF_TABLES=y
>
> grep CONFIG_IP_NF_NAT= /boot/config-`uname -r`
> nothing
>
> This entry is not present at all. Should I add it ?
>
> On Wed, Aug 16, 2023 at 1:10 AM tempforever <dev1@???> wrote:
>
>> Just curious, what is your kernel version? I had a similar issue trying
>> to set up wireguard on an old kernel, aarch64 machine.
>>
>> Mario Marietto via Dng wrote:
>>
>> root@devuan:~# sudo modprobe ip_tables
>>
>> root@devuan:~# sudo echo 'ip_tables' >> /etc/modules
>>
>> root@devuan:~# iptables -t nat -A POSTROUTING -o mlan0 -j MASQUERADE
>>
>> iptables v1.8.7 (legacy): can't initialize iptables table `nat': Table
>> does not exist (do you need to insmod?)
>> Perhaps iptables or your kernel needs to be upgraded.
>>
>>
>> _______________________________________________
>> Dng mailing list
>> Dng@???
>> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
>>
>
>
> --
> Mario.
>
>
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
>
--
Mario.
::
Re: [DNG] Which qemu version is shi…
