Not for me. This parameter :

-device i82559b,netdev=net0,mac="52:54:00:12:34:55"

give to me a lot of problems :

1) forces me to enter the UEFI menu and to choose manually the disk that
should boot
2) I can reach the login prompt of FreeBSD,but this network configuration
does not work :

/etc/rc.conf

hostname="marietto"
ifconfig_fxp0="DHCP"
local_unbound_enable="YES"
gateway_enable="YES"

/etc/resolv.conf

nameserver 127.0.0.53
options edns0 trust-ad
search homenet.telecomitalia.it
nameserver 8.8.8.8

root@mario:~ # ifconfig

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 52:54:00:12:34:55
        inet 10.0.2.15 netmask 0xffffff00 broadcast 10.0.2.255
        media: Ethernet autoselect (10baseT/UTP <half-duplex>)
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>

I can ping 10.0.2.15,but not google.com ;

root@mario:~ # ping google.com

PING google.com (142.250.180.142): 56 data bytes
frozen.

Now,on the FreeBSD forum,the user "covacat" suggested me to : "create
a tap device on the linux side and bridge it with your ethernet
iface"

I tried,but now arises another problem : the kernel that I'm using on
the chromebook has the option bridge disabled in the kernel,so

I have recompiled the kernel to enable it. Here comes another problem
: The new kernel worked,my Chromebook reached the desktop environment

access login,but mouse,keyboard and trackpad don't work. I think that
when I have recompiled the kernel I haven't produced the new kernel

modules. Do you know what's the proper command to do this ? If I
remember well,should it be "make modules" ?



On Tue, Aug 15, 2023 at 2:34 AM Ralph Ronnquist <rrq@???> wrote:

> The card "i82559b" worked for me.
>
> It boots without entering UEFI shell first. And it has update my local
> AAVMF32_VARS.fd to continue doing so.
>
> Perhaps if copy the system AAVMF32_VARS.fd once again, to refresh
> locally, with a working boot then your will "learn" too?
>
> regards,
>
> Ralph.
>
> On Mon, Aug 14, 2023 at 07:55:36PM +0200, Mario Marietto wrote:
> > Do you need to go inside the UEFI menu to boot FreeBSD or in your case it
> > is detected at first shot ? because I haven't fixed the probem yet.
> > ...
> > --
> > Mario.
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
>


--
Mario.