Hi,
On Tue, Aug 01, 2023 at 09:22:40PM +0200, Sicelo A. Mhlongo wrote:
> Identify and print the error source before rebooting the board due to an l3
> timeout error. This is helpful when debugging, e.g. via serial.
>
> Signed-off-by: Sicelo A. Mhlongo <absicsz@???>
> ---
> drivers/bus/omap_l3_smx.c | 21 ++++++++++-----------
> 1 file changed, 10 insertions(+), 11 deletions(-)
nice, adding features with a negative diffstat :)
Reviewed-by: Sebastian Reichel <sebastian.reichel@???>
-- Sebastian
> diff --git a/drivers/bus/omap_l3_smx.c b/drivers/bus/omap_l3_smx.c
> index bb1606f5ce2d..8e1a38bfcd8b 100644
> --- a/drivers/bus/omap_l3_smx.c
> +++ b/drivers/bus/omap_l3_smx.c
> @@ -166,19 +166,10 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
> irqreturn_t ret = IRQ_NONE;
>
> int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
> - if (!int_type) {
> + if (!int_type)
> status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0);
> - /*
> - * if we have a timeout error, there's nothing we can
> - * do besides rebooting the board. So let's BUG on any
> - * of such errors and handle the others. timeout error
> - * is severe and not expected to occur.
> - */
> - BUG_ON(status & L3_STATUS_0_TIMEOUT_MASK);
> - } else {
> + else
> status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_1);
> - /* No timeout error for debug sources */
> - }
>
> /* identify the error source */
> err_source = __ffs(status);
> @@ -190,6 +181,14 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
> ret |= omap3_l3_block_irq(l3, error, error_addr);
> }
>
> + /*
> + * if we have a timeout error, there's nothing we can
> + * do besides rebooting the board. So let's BUG on any
> + * of such errors and handle the others. timeout error
> + * is severe and not expected to occur.
> + */
> + BUG_ON(!int_type && status & L3_STATUS_0_TIMEOUT_MASK);
> +
> /* Clear the status register */
> clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) |
> L3_AGENT_STATUS_CLEAR_TA;
> --
> 2.40.1
>
::
Re: [maemo-leste] [PATCH v3] bus: o…
