:: Re: [maemo-leste] [PATCH v3] bus: o…
Startseite
Nachricht löschen
Nachricht beantworten
Autor: Sebastian Reichel
Datum:  
To: Sicelo A. Mhlongo
CC: linux-omap, linux-kernel, maemo-leste
Betreff: Re: [maemo-leste] [PATCH v3] bus: omap_l3_smx: identify timeout cause before rebooting
Hi,

On Tue, Aug 01, 2023 at 09:22:40PM +0200, Sicelo A. Mhlongo wrote:
> Identify and print the error source before rebooting the board due to an l3
> timeout error. This is helpful when debugging, e.g. via serial.
>
> Signed-off-by: Sicelo A. Mhlongo <absicsz@???>
> ---
> drivers/bus/omap_l3_smx.c | 21 ++++++++++-----------
> 1 file changed, 10 insertions(+), 11 deletions(-)


nice, adding features with a negative diffstat :)

Reviewed-by: Sebastian Reichel <sebastian.reichel@???>

-- Sebastian

> diff --git a/drivers/bus/omap_l3_smx.c b/drivers/bus/omap_l3_smx.c
> index bb1606f5ce2d..8e1a38bfcd8b 100644
> --- a/drivers/bus/omap_l3_smx.c
> +++ b/drivers/bus/omap_l3_smx.c
> @@ -166,19 +166,10 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
>      irqreturn_t ret = IRQ_NONE;

>
>      int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
> -    if (!int_type) {
> +    if (!int_type)
>          status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0);
> -        /*
> -         * if we have a timeout error, there's nothing we can
> -         * do besides rebooting the board. So let's BUG on any
> -         * of such errors and handle the others. timeout error
> -         * is severe and not expected to occur.
> -         */
> -        BUG_ON(status & L3_STATUS_0_TIMEOUT_MASK);
> -    } else {
> +    else
>          status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_1);
> -        /* No timeout error for debug sources */
> -    }

>
>      /* identify the error source */
>      err_source = __ffs(status);
> @@ -190,6 +181,14 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
>          ret |= omap3_l3_block_irq(l3, error, error_addr);
>      }

>
> +    /*
> +     * if we have a timeout error, there's nothing we can
> +     * do besides rebooting the board. So let's BUG on any
> +     * of such errors and handle the others. timeout error
> +     * is severe and not expected to occur.
> +     */
> +    BUG_ON(!int_type && status & L3_STATUS_0_TIMEOUT_MASK);
> +
>      /* Clear the status register */
>      clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) |
>          L3_AGENT_STATUS_CLEAR_TA;
> -- 
> 2.40.1

>