:: Re: [DNG] Information request (mayb…
Góra strony
Delete this message
Reply to this message
Autor: jeremy ardley
Data:  
Dla: dng
Temat: Re: [DNG] Information request (maybe OT - - - dunno)

On 17/5/23 04:32, o1bigtenor via Dng wrote:
> One of my problems is that each working node is likely generating data
> that I do want to keep.
> Some of the data is generated every say 0.5 sec and the data is needed
> for longer term analysis
> and at the same time when a preset flow rate is reached then there is
> a another part of the system
> that is halted. Then there will be specific functions that have to
> happen and there is a limited amount
> of time for this all to happen. Following this the process starts all
> over again. Eventually up to 15 times
> 3 times per day - - - all to reduce the amount of human employee time
> needed to get the job done.

--
The Seeed studio XIAO ecosystem of processors and interface devices is
likely of interest to you
I link here one processor that is Python capable.
https://www.seeedstudio.com/XIAO-RP2040-v1-0-p-5026.html
If you explore their website you'll find a whole array of equipment that
could be useful.

NB. I source most of my equipment from AliExpress rather than Seeed. In
your case Seeed is a one-stop-shop suitable for an entry level project,
however you may have to look at AliExpress for power components such as
buck and boost converters.

If you need a fancy host processor to link everything together, you can
run Devuan on an ARM SOC - see https://dev1galaxy.org/viewforum.php?id=24


Jeremy