:: Re: [DNG] still trying to wiping di…
Etusivu
Poista viesti
Vastaa
Lähettäjä: jeremy ardley
Päiväys:  
Vastaanottaja: dng
Uudet otsikot: Re: [DNG] Succeeded in wiping disconnected Raid components
Aihe: Re: [DNG] still trying to wiping disconnected Raid components

On 4/5/23 09:38, Hendrik Boom wrote:
> I have a hard drive, that's been disconnected to its computer or over a year now for harware connection reasone.
> It contains a RAID parttion that use to part of a RAID1 device on that machine.
> Now I want to put it back into its machine, so it can once more fuction as part of the RAID it used to be part of.
>
> But I absolutel don't want any of the data on it to be treated as valid, because it is massively out of date.
>
> But it still has a perfectly valid RAID signature indicating it is part of the RAID it used to be ann active part ot, I am terrified that, after I put the drive back into its machine, the automatic RAID assembly on boot will pick it instaed of the current, up-to-date one as the valid version, and thus lose over a year's data.
>
> **What do I have to do to make sure it is *no longer recognised as part of its RAID*
>
> so that I can boot with the up-to-date OS (and not the ancient one) and properly use mdadm to add it safely as a new RAID component?
>
> All the instructions I've found online an in man pages don't tell me how to remove it from a RAID without it already having been assembled into the RAID. amd that is precisely what I want t prevent from happening prematurely.
>
> -- hendrik
> _______________________________________________


Disconnect the other drives in the RAID and connect the unwanted drive.
Then boot the system using a USB or DVD live system to run a tool to
reformat the single drive.
This assumes you don't have a hardware RAID controller.

An alternative approach is to use a HDD Caddy and connect using USB.

In all cases a simple dd command will remove traces of the RAID

dd if=/dev/zero of=/dev/<yourdrive> bs=10M


Jeremy