:: [devuan-dev] bug#108: marked as don…
Góra strony
Delete this message
Reply to this message
Autor: Devuan bug Tracking System
Data:  
Dla: Mark Hindley
Temat: [devuan-dev] bug#108: marked as done (gigabyte ga-78lmt-usb3 motherboard does not halt if power on by alarm is set in BIOS)
Your message dated Thu, 20 Apr 2023 07:36:35 +0100
with message-id <ZEDdc/46QjzTfvs6@???>
and subject line Re: bug#108: gigabyte ga-78lmt-usb3 motherboard does not halt if power on by alarm is set in BIOS
has caused the Devuan bug report #108,
regarding gigabyte ga-78lmt-usb3 motherboard does not halt if power on by alarm is set in BIOS
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@???
immediately.)


--
108: https://bugs.devuan.org/cgi/bugreport.cgi?bug=108
Devuan Bug Tracking System
Contact owner@??? with problems
Package: initscripts
Version: 8dsf-59.2+devuan2

(This is my second try. I'm hoping my problem the first time was leaving
out the colons after Package and Version.)

When I set power on by alarm on my gigabyte ga-78lmt-usb3 computer, if I
then try to shut down and halt the computer running Devuan, (ie "shutdown
-h now" on command line, or from the system shutdown menu), the computer
will shutdown but then it immediately restarts. This does not happen if I
am running linux Mint 18.1 on my gigabyte board. With linux mint the
system behaves as expected, it powers down, but then restarts at the time
specified for power on by alarm.

If I run devuan on another computer, using a Foxconn G45M motherboard, the
system also behaves as expected. So it's not a general problem with every
motherboard, but it's also not exactly a bug with the gigabyte board since
some linux distros 'work'.

In the instructions for power on by alarm found in the Gigabyte User's
manual, there is this ominous note at the end: *When using this function,
avoid inadequate shutdown from the operating system or removal of the AC
power, or the settings may not be effective*. (Boldface is mine, not the
manual's.)

Thanks,
Carl Weidling
On Wed, Jan 11, 2023 at 07:45:41AM +0000, Mark Hindley wrote:
> Control: tags -1 moreinfo
>
> Is this still an issue?


Since there has been no response and this relates to the version that was in
jessie (which is now EOL and archived) I am going to close this report.

Please do open a new report against the current version if you can trigger the
behaviour there.

Thanks.

Mark