:: [devuan-dev] bug#748: nfs-ganesha: …
Inizio della pagina
Delete this message
Reply to this message
Autore: Bodo Eggert
Data:  
To: Devuan Bug Tracking System
Oggetto: [devuan-dev] bug#748: nfs-ganesha: ganesha has a memory leak
Package: nfs-ganesha
Version: 3.4-1
Severity: grave
Justification: renders package unusable

Dear Maintainer,

the shipped version of ganesha, version 3.4, does have a memory leak that
causes it to consume all available RAM and more. I have 4 GB installed, but
yesterday ganesha did use about 6 GB and each stat() required swapping.

I did research about this some time ago, the recommended fix was to upgrade
to 4.x. Today I tried to find that information again so I could link it but
I couldn't. Still I think that it needs an upgrade as the proper fix, there
are a lot of memory leak threads on the maintainers' github.

In case the upgrade is not possible: (Otherwise ignore this please)

Currently I'm mitigating this with cgrpups and daily restarting the service.
This (below) is the configuration that I'm trying since yesterday; I added
memory.soft_limit_in_bytes. memory.limit_in_bytes alone did not help.
Today the process did behave as expected.

$ cat /etc/boot.d/00cgconfig
#!/bin/sh
/usr/sbin/cgconfigparser -l /etc/cgconfig.conf
/usr/sbin/cgrulesengd
exit 0


/etc/cgconfig.conf:group daemon/nfsd {
/etc/cgconfig.conf:  cpu {
/etc/cgconfig.conf:    cpu.shares = 500;
/etc/cgconfig.conf:  }
/etc/cgconfig.conf:  memory {
/etc/cgconfig.conf:    memory.limit_in_bytes = 1000000000;
/etc/cgconfig.conf:    memory.soft_limit_in_bytes = 1000000000;
/etc/cgconfig.conf:  }
/etc/cgconfig.conf:}


/etc/cgrules.conf:*:/usr/bin/ganesha.nfsd       memory  daemon/nfsd



-- System Information:
Distributor ID:    Devuan
Description:    Devuan GNU/Linux 4 (chimaera)
Release:    4
Codename:    chimaera
Architecture: x86_64


Kernel: Linux 5.10.0-18-amd64 (SMP w/2 CPU threads)
Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
LSM: AppArmor: enabled

Versions of packages nfs-ganesha depends on:
ii  dbus              1.12.24-0+deb11u1devuan1
ii  libacl1           2.2.53-10
ii  libblkid1         2.36.1-8+devuan2
ii  libc6             2.31-13+deb11u5
ii  libcap2           1:2.44-1
ii  libcom-err2       1.46.2-2
ii  libdbus-1-3       1.12.24-0+deb11u1devuan1
ii  libgssapi-krb5-2  1.18.3-6+deb11u3
ii  libkrb5-3         1.18.3-6+deb11u3
ii  libnfsidmap2      0.25-6
ii  libntirpc3.4      3.4-2
ii  librados2         14.2.21-1
ii  liburcu6          0.12.2-1
ii  libuuid1          2.36.1-8+devuan2
ii  libwbclient0      2:4.13.13+dfsg-1~deb11u5
ii  nfs-common        1:1.3.4-6
ii  rpcbind           1.2.5-9


nfs-ganesha recommends no packages.

nfs-ganesha suggests no packages.

-- Configuration Files:
/etc/ganesha/ganesha.conf changed:
NFS_CORE_PARAM {
    ## Allow NFSv3 to mount paths with the Pseudo path, the same as NFSv4,
    ## instead of using the physical paths.
    #mount_path_pseudo = true;
    ## Configure the protocols that Ganesha will listen for.  This is a hard
    ## limit, as this list determines which sockets are opened.  This list
    ## can be restricted per export, but cannot be expanded.
    Protocols = 3,4,9P;
}
EXPORT_DEFAULTS {
    ## Access type for clients.  Default is None, so some access must be
    ## given either here or in the export itself.
    #Access_Type = RW;
    Protocols = 3,4,9P;
    #FSAL {
    #    Name = VFS;
    #}
}
MDCACHE {
    ## The point at which object cache entries will start being reused.
    #Entries_HWMark = 100000;
    Entries_HWMark = 50000;
}
EXPORT
{
    ## Export Id (mandatory, each EXPORT must have a unique Export_Id)
    Export_Id = 1;
    ## Exported path (mandatory)
    Path = /export;
    ## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)
    Pseudo = /;
    ## Restrict the protocols that may use this export.  This cannot allow
    ## access that is denied in NFS_CORE_PARAM.
    Protocols = 3,4,9P;
    ## Access type for clients.  Default is None, so some access must be
    ## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block
    ## Whether to squash various users.
    ## Allowed security types for this export
    #Sectype = sys,krb5,krb5i,krb5p;
        FSAL {
                Name = VFS;
        }
    CLIENT
    {
        Clients = 192.168.redacted.0/24;
        Squash = None;
        Access_Type = RW;
        Sectype = sys;
    }
}
    ## Default log level for all components
    #Default_Log_Level = WARN;
    ## Configure per-component log levels.
    #Components {
        #FSAL = INFO;
        #NFS4 = EVENT;
    #}
    ## Where to log
    #Facility {
        #name = FILE;
        #destination = "/var/log/ganesha.log";
        #enable = active;
    #}



-- no debconf information