:: Re: [DNG] trying to do a chimera ne…
Página Inicial
Delete this message
Reply to this message
Autor: Antonio Rendina
Data:  
Para: o1bigtenor
CC: dng
Assunto: Re: [DNG] trying to do a chimera netinstall
I think that if you find a way to post the output of lshw command. It
would clarify a lot of things.

Antonio

Il 10/01/23 17:34, o1bigtenor ha scritto:
> On Tue, Jan 10, 2023 at 9:05 AM Antonio Rendina via Dng
> <dng@???> wrote:
>>
>> At first sight, looks like the kernel does not support the drive, maybe
>> you need a newer kernel or maybe you need to load some module and we
>> have to discover which module you need.
>> You should dig in using tools like lspci, lsusb and lshw and understand
>> what modules you need to load. lshw tells you the module/driver loaded
>> with the hardware that you are running. lspci -v does the same.
>>
>> Before starting the installation, try to install a live iso, so you can
>> gather information about the hardware, then if you post the results of
>> the hardware we can try and help better.
>>
>> With this information is quite difficult to get what's going wrong.
>> Because we have to guess.
>>
>
> Am in process of setting up another usb stick with systemrescue9.0
> which I think should qualify as a live iso.
>
> Suggestions as to where to dig/look for things?
>
> (I have been trying to find the sdd but to no avail in the busybox version
> with the installer.)
>
> Thanks for the suggestion!
>
> (This may take a bit - - - sorry!)
>
> Regards