:: Re: [DNG] trying to do a chimera ne…
Kezdőlap
Delete this message
Reply to this message
Szerző: Antonio Rendina
Dátum:  
Címzett: dng
Tárgy: Re: [DNG] trying to do a chimera netinstall
At first sight, looks like the kernel does not support the drive, maybe
you need a newer kernel or maybe you need to load some module and we
have to discover which module you need.
You should dig in using tools like lspci, lsusb and lshw and understand
what modules you need to load. lshw tells you the module/driver loaded
with the hardware that you are running. lspci -v does the same.

Before starting the installation, try to install a live iso, so you can
gather information about the hardware, then if you post the results of
the hardware we can try and help better.

With this information is quite difficult to get what's going wrong.
Because we have to guess.

Antonio

Il 09/01/23 03:47, o1bigtenor via Dng ha scritto:
> Greetings
>
> Set up a usb stick with chimera 4.0.0 to do a net install on a lenovo
> 100e laptop (minimally configured laptop w 64 GB nvme drive (I
> think)).
>
> Got stuck when the Ramaxel MMC64G drive is not listed.
> So the installer was trying to install onto the usb stick (that don't work).
>
> How/where do I find a driver for this sdd?
>
> TIA
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng