:: Re: [DNG] Chimaera install problem
Página Inicial
Delete this message
Reply to this message
Autor: Fred
Data:  
Para: dng
Assunto: Re: [DNG] Chimaera install problem
On 1/6/23 08:01, Ralph Ronnquist wrote:
> On Fri, Jan 06, 2023 at 07:17:04AM -0700, Fred wrote:
>> Yesterday I worked with the server iso since the netinstall didn't work.
>> However, today I will try again with the netinstall since that is what you
>> are working with and I will make the .disk/info file.
>>
>> fred@ragnok:~$ sha256sum --ignore-missing -c SHA256SUMS
>> devuan_chimaera_4.0.0_amd64_cd3.iso: OK
>> devuan_chimaera_4.0.0_amd64_netinstall.iso: OK
>> devuan_chimaera_4.0.0_amd64_server.iso: OK
>>
>> The SHA256SUMS line for the netinstall is the same as your entry above.
>
> Ok. That confirms it's the right media. All of those have .disk/info
> files.
>
>> The three isos and the SHA file all came from this mirror:
>> mirrors.ocf.berkeley.edu/devuan-cd/
>>
>> I will post later on today when I have tried the netinstall again.
>
> When running the installation, please try the plain "Install" option,
> and when it comes the Partition Disks dialog, enter the shell with
> Ctrl-Alt-F2 (and Enter).
>
> Use "blkid" to see which block devices the installer sees, and
> use "df -h" to see which, if any, are mounted.
>
> After partitioning, the installer will want "/cdrom" to be a mount of
> the installation media of type iso9660.
>
> If "blkid" says that there is an iso9660 partition xxx, but it's not
> mounted, then try a manual hands-on:
> # mount -t iso9660 xxx /cdrom
>
> Return to the installation with Ctrl-Alt-F1
>
> Ralph.
>
>
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng

Hi Ralph,

I went back to the netinstall iso since that is what you asked me to
verify this morning.

I used the plain install method.

blkid shows:
sda1,2,3 partitioned from a previous install attempt.
sdb type iso9660 which is the sd/usb with the netinstall image
sdc1 type iso9660
sdc2 type vfat

Yesterday with the server install attempt I had another sd/usb with the
CD3 iso. That is still plugged in and I guess is the sdc.

df -h
tmpfs     mounted on /run
devtmpfs  mounted on /dev
/dev/sdc1 mounted on /cdrom


Yesterday with the server, advanced/expert install method the cdrom was
not mounted. The mini-pc does not have an actual cdrom drive only a
bunch of usb ports.

The .disk directory does not exist. Do you want me to add it and the
info file?

Best regards,
Fred