:: Re: [DNG] legacy boot Chimaera?
Etusivu
Poista viesti
Vastaa
Lähettäjä: Fred
Päiväys:  
Vastaanottaja: dng
Aihe: Re: [DNG] legacy boot Chimaera?
On 1/4/23 08:27, Antony Stone wrote:
> On Wednesday 04 January 2023 at 15:22:22, Fred wrote:
>
>> On 1/4/23 07:59, Antony Stone wrote:
>>> On Wednesday 04 January 2023 at 14:42:07, Fred wrote:
>>>> I downloaded the netinstall iso and put it on the usb stick. I mounted
>>>> the stick and found it has the same type of files as before.
>>>>
>>>> Device     Boot Start    End Sectors  Size Id Type
>>>> /dev/sdb1  *        0 761855  761856  372M  0 Empty
>>>> /dev/sdb2        4040   5511    1472  736K ef EFI (FAT-12/16/32)

>
>> On this computer usb automounts when plugged in.
>
> We're not really talking about auto-mounting - we're talking about finding a
> bootable device.


I meant the computer I am writing this email on, not the one that won't
boot the usb.
>
>> I dd'ed the .iso to /dev/sdb which maybe is not correct?
>
> No, that is correct.
>
>> /sbin/fdisk -l shows the stick now has sdb1 and sdb2. The automount
>> picks sdb2.

Automount on the computer I was examining the usb stick not the one that
won't boot. Because of the automount I didn't know there were two
partitions on the usb.
>
> That seems bizaree, when booting from USB, since it is the first partition
> which has the boot flag set (see above).
>
>> So we are back to square 1. The usb stick should be a valid boot device
>> and the mini-pc doesn't like what it sees there. It does see the stick
>> because the led comes on and at times it blinks rapidly.
>
> Try downloading the image and then using fdisk to change the first partition
> type to FAT32, then see which partitiong the machine tries to boot from.
>
>
> Antony.
>

I am willing to try this but after reading the fdisk man page I am not
sure how to do it. Won't fdisk corrupt the files in sdb1 if changes are
made? Could you provide a command line to try?

I should like to try the usb on another computer to see if the installer
comes up provided the installer can be exited before making any changes.
Should I just power off or is there a way to gracefully exit the
installer?

Best regards,
Fred