:: Re: [DNG] legacy boot Chimaera?
Etusivu
Poista viesti
Vastaa
Lähettäjä: Fred
Päiväys:  
Vastaanottaja: dng
Aihe: Re: [DNG] legacy boot Chimaera?
On 1/3/23 23:49, tito via Dng wrote:
> On Wed, 4 Jan 2023 14:36:37 +1100
> Ralph Ronnquist <rrq@???> wrote:
>
>> Please note that the iso is a "hybrid iso" with a couple of different
>> boot methods supported. In particular it typically presents a CD boot
>> option for BIOS boot systems also when written to USB. So it may be
>> that one you should try.
>>
>> I might be able to go through the hybrid boot setup, which involves
>> playing funny-buggers with the partitioning table(s). But it's not a
>> very fun story and I'm likely to explain it wrong anyhow :)
>>
>> Ralph.
>>
>> On Tue, Jan 03, 2023 at 06:38:11PM -0700, Fred wrote:
>>> On 1/3/23 18:22, john faulk wrote:
>>>> Have you tried going into the bios at all?
>>>
>>> Yes, I have been all through the bios. I checked the boot order which is:
>>> CD (which the pc doesn't have)
>>> USB
>>> Network (which I removed)
>>>
>>> There is another page that also lists the internal hard drive.
>>>
>>> The boot options are: Legacy and Secure Boot which appears to be a Windows
>>> thing. There is a tab for UEFI drivers. If that is selected it changes to
>>> a page that says I will be directed to a page for a third party rom also
>>> accessible with F3. If that is selected it changes to a page with only the
>>> option: EXIT which reboots the pc. I assume the rom is not installed.
>>>
>>> Best regards,
>>> Fred
>>>
>>>>
>>>> On Tue, Jan 3, 2023, 7:18 PM Fred <fred@???
>>>> <mailto:fred@blakemfg.com>> wrote:
>>>>
>>>>      On 1/3/23 15:54, Antony Stone wrote:
>>>>       > On Tuesday 03 January 2023 at 22:28:41, Fred wrote:
>>>>       >
>>>>       >> Hello,

>>>>       >>
>>>>       >> I bought a "refurbished" HP EliteDesk 800 G2 mini-pc with the
>>>>      intention
>>>>       >> of running Chimaera on it.  However, it will only legacy boot
>>>>      and the
>>>>       >> .iso install files for Chimaera on the USB stick are .efi.  Is
>>>>      all hope
>>>>       >> lost or is there a work around?

>>>>       >
>>>>       > Sorry, but I don't understand the problem.

>>>>       >
>>>>       > I have at least four machines here which have no concept of UEFI
>>>>      - they boot
>>>>       > using BIOS only, and yet they (start and) run Chimaera quite happily.

>>>>       >
>>>>       > So, when you attempt to install Chimaera on this EliteDesk
>>>>      machine, what
>>>>       > exactly is the problem you run into?

>>>>       >

>>>>       >
>>>>       > Antony.

>>>>       >
>>>>      The pc sees the usb stick as it turns on the led and at times makes it
>>>>      flash.  However, what it does is snoop around the local network
>>>>      until it
>>>>      finds the gateway then it downloads Windows 10 and starts setup for
>>>>      that.  If I don't have the Ethernet cable attached it eventually brings
>>>>      up a screen with several remote servers and allows one to be selected
>>>>      but it won't continue without the network.

>>>>
>>>>      I used dd to write this file:

>>>>
>>>>      devuan_chimaera_4.0.0_amd64_server.iso

>>>>
>>>>      to the usb stick.  I can mount it and see the files:

>>>>
>>>>      There is: /efi/boot/bootia32.efi
>>>>      and:      /efi/boot/bootx64.efi

>>>>
>>>>      What can I check now?

>>>>
>>>>      Best regards,
>>>>      Fred

>
> Hi,
>
> a alternative solution could be to extract the hard drive install it into another
> amd64 system, install devuan on it and add all firmware (free, non free and others)
> deb packages. Then put it back into your HP box. I think it will boot and with a few
> minor fixes you will have devuan installed and working.
>
> Hope this helps.
> Ciao,
> Tito
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng

Hi,

I am sure this would work but this is a mini-pc and it has a mini-hd
with mSATA connection. I don't have another computer with mSATA.

Best regards,
Fred