:: Re: [DNG] legacy boot Chimaera?
Etusivu
Poista viesti
Vastaa
Lähettäjä: Ralph Ronnquist
Päiväys:  
Vastaanottaja: dng
Aihe: Re: [DNG] legacy boot Chimaera?
Please note that the iso is a "hybrid iso" with a couple of different
boot methods supported. In particular it typically presents a CD boot
option for BIOS boot systems also when written to USB. So it may be
that one you should try.

I might be able to go through the hybrid boot setup, which involves
playing funny-buggers with the partitioning table(s). But it's not a
very fun story and I'm likely to explain it wrong anyhow :)

Ralph.

On Tue, Jan 03, 2023 at 06:38:11PM -0700, Fred wrote:
> On 1/3/23 18:22, john faulk wrote:
> > Have you tried going into the bios at all?
>
> Yes, I have been all through the bios. I checked the boot order which is:
> CD (which the pc doesn't have)
> USB
> Network (which I removed)
>
> There is another page that also lists the internal hard drive.
>
> The boot options are: Legacy and Secure Boot which appears to be a Windows
> thing. There is a tab for UEFI drivers. If that is selected it changes to
> a page that says I will be directed to a page for a third party rom also
> accessible with F3. If that is selected it changes to a page with only the
> option: EXIT which reboots the pc. I assume the rom is not installed.
>
> Best regards,
> Fred
>
> >
> > On Tue, Jan 3, 2023, 7:18 PM Fred <fred@???
> > <mailto:fred@blakemfg.com>> wrote:
> >
> >     On 1/3/23 15:54, Antony Stone wrote:
> >      > On Tuesday 03 January 2023 at 22:28:41, Fred wrote:
> >      >
> >      >> Hello,

> >      >>
> >      >> I bought a "refurbished" HP EliteDesk 800 G2 mini-pc with the
> >     intention
> >      >> of running Chimaera on it.  However, it will only legacy boot
> >     and the
> >      >> .iso install files for Chimaera on the USB stick are .efi.  Is
> >     all hope
> >      >> lost or is there a work around?

> >      >
> >      > Sorry, but I don't understand the problem.

> >      >
> >      > I have at least four machines here which have no concept of UEFI
> >     - they boot
> >      > using BIOS only, and yet they (start and) run Chimaera quite happily.

> >      >
> >      > So, when you attempt to install Chimaera on this EliteDesk
> >     machine, what
> >      > exactly is the problem you run into?

> >      >

> >      >
> >      > Antony.

> >      >
> >     The pc sees the usb stick as it turns on the led and at times makes it
> >     flash.  However, what it does is snoop around the local network
> >     until it
> >     finds the gateway then it downloads Windows 10 and starts setup for
> >     that.  If I don't have the Ethernet cable attached it eventually brings
> >     up a screen with several remote servers and allows one to be selected
> >     but it won't continue without the network.

> >
> >     I used dd to write this file:

> >
> >     devuan_chimaera_4.0.0_amd64_server.iso

> >
> >     to the usb stick.  I can mount it and see the files:

> >
> >     There is: /efi/boot/bootia32.efi
> >     and:      /efi/boot/bootx64.efi

> >
> >     What can I check now?

> >
> >     Best regards,
> >     Fred

> >
> >     _______________________________________________
> >     Dng mailing list
> >     Dng@??? <mailto:Dng@lists.dyne.org>
> >     https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
> >     <https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng>

> >
>
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng