:: [maemo-leste] [PATCH v3 2/2] ARM: d…
Pàgina inicial
Delete this message
Reply to this message
Autor: Sicelo A. Mhlongo
Data:  
A: linux-omap
CC: Sicelo A. Mhlongo, linux-kernel, robh+dt, krzysztof.kozlowski+dt, tony, devicetree, maemo-leste, Krzysztof Kozlowski
Assumpte: [maemo-leste] [PATCH v3 2/2] ARM: dts: n900: use iio driver for accelerometer
The accelerometer in the N900 is supported by the iio-framework since commit
8a7449d68670a8f9 ("iio: accel: add support for LIS302DL variant). This commit
switches to it and updates node properties to match the bindings of the new
compatible.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@???>
Signed-off-by: Sicelo A. Mhlongo <absicsz@???>
---
arch/arm/boot/dts/omap3-n900.dts | 52 +++++---------------------------
1 file changed, 8 insertions(+), 44 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 20d7a7bb6b04..adee3da93421 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -768,55 +768,19 @@ &i2c3 {
     clock-frequency = <400000>;


     accelerometer@1d {
-        compatible = "st,lis3lv02d";
+        compatible = "st,lis302dl";
         reg = <0x1d>;


-        Vdd-supply = <&vaux1>;
-        Vdd_IO-supply = <&vio>;
+        vdd-supply = <&vaux1>;
+        vddio-supply = <&vio>;


         interrupt-parent = <&gpio6>;
-        interrupts = <21 20>; /* 181 and 180 */
-
-        /* click flags */
-        st,click-single-x;
-        st,click-single-y;
-        st,click-single-z;
-
-        /* Limits are 0.5g * value */
-        st,click-threshold-x = <8>;
-        st,click-threshold-y = <8>;
-        st,click-threshold-z = <10>;
-
-        /* Click must be longer than time limit */
-        st,click-time-limit = <9>;
-
-        /* Kind of debounce filter */
-        st,click-latency = <50>;
-
-        /* Interrupt line 2 for click detection */
-        st,irq2-click;
-
-        st,wakeup-x-hi;
-        st,wakeup-y-hi;
-        st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
-
-        st,wakeup2-z-hi;
-        st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
-
-        st,hipass1-disable;
-        st,hipass2-disable;
-
-        st,axis-x = <1>;    /* LIS3_DEV_X */
-        st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
-        st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
-
-        st,min-limit-x = <(-32)>;
-        st,min-limit-y = <3>;
-        st,min-limit-z = <3>;
+        interrupts = <21 IRQ_TYPE_EDGE_RISING>,
+                 <20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */


-        st,max-limit-x = <(-3)>;
-        st,max-limit-y = <32>;
-        st,max-limit-z = <32>;
+        mount-matrix =     "-1",  "0",  "0",
+                  "0",  "1",  "0",
+                  "0",  "0",  "1";
     };


     cam1: camera@3e {
-- 
2.39.0