:: Re: [DNG] linux ssd problem
Kezdőlap
Delete this message
Reply to this message
Szerző: Peter Duffy
Dátum:  
Címzett: dng
Tárgy: Re: [DNG] linux ssd problem
Yes, that has been at the back of my mind also. At the moment, I can't
test the theory: all the SATA connectors are occupied. The motherboard
only allows 4 onboard: I have an extra SATA card installed - but I
don't trust it as far as I could throw it, and I don't really want to
add more weirdness into the mix.

The USB3 is direct to the motherboard connector: I've been using an
identical Samsung 870 EVO via the same connector without problems (so
far anyway).

I've dug out an older SanDisk 1T SSD, and I'm just dd'ing the disk
which keeps borking to it - assuming it completes OK, I'll try using
the SanDisk and see what happens.


On Fri, 2022-11-18 at 16:59 +0100, Antony Stone wrote:
> I would suspect the interface you're using to connect it over USB3.
>
> Do you have any opportunity to connect it to a spare SATA connector
> on the
> motherboard, as a comparison?
>
>
> Antony.
>
> > On Fri, 2022-11-18 at 15:30 +0000, Peter Duffy wrote:
> > > Correction - they're Samsung 870 EVOs.
> > >
> > > Sorry.
> > >
> > > On Fri, 2022-11-18 at 15:25 +0000, Peter Duffy wrote:
> > > > I recently bought a couple of Samsung 1T EVO 970 SSDs to do
> > > > some
> > > > work:
> > > > basically I need to simulate the loading of a fairly big mysql
> > > > database
> > > > (>80G). I'm currently hitting a very weird problem.
> > > >
> > > > The mysql is percona 5.7. I attach the disk via USB3, partition
> > > > it,
> > > > create an ext4 fs on one of the partitions, mount it, create a
> > > > directory on it, configure mysql to use it as the datadir, and
> > > > then
> > > > initialise it for mysql use. All good so far. I then start the
> > > > mysql
> > > > dataload, and it's progressing happily.
> > > >
> > > > Then the mysql server bombs out, and messages like the
> > > > following
> > > > appear
> > > > in the dmesg output:
> > > >
> > > > [19718.093317] sd 12:0:0:0: [sdf] tag#21 FAILED Result:
> > > > hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=27s
> > > > [19718.093327] sd 12:0:0:0: [sdf] tag#21 Sense Key : Illegal
> > > > Request
> > > > [current]
> > > > [19718.093330] sd 12:0:0:0: [sdf] tag#21 Add. Sense: Invalid
> > > > command
> > > > operation code
> > > > [19718.093333] sd 12:0:0:0: [sdf] tag#21 CDB: Synchronize
> > > > Cache(10)
> > > > 35 00 00 00 00 00 00 00 00 00
> > > > [19718.093340] blk_update_request: critical target error, dev
> > > > sdf,
> > > > sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
> > > >
> > > > I'm trying to decide whether I'm just dealing with a borked SSD
> > > > (it
> > > > came from Amazon: yeah, I know - if I will buy SSDs from that
> > > > source,
> > > > what do I expect?) - or something more subtle and/or complex.
> > > > Reading
> > > > the above messages literally, they seem to indicate that a
> > > > command
> > > > is
> > > > being sent to the SSD and it's not understanding it.
> > > >
> > > > Any thoughts would be most gratefully welcomed.
>