:: Re: [DNG] do I need drivers for
Top Pagina
Delete this message
Reply to this message
Auteur: o1bigtenor
Datum:  
Aan: Devuan ML
Onderwerp: Re: [DNG] do I need drivers for
On Tue, Jun 21, 2022 at 11:53 PM Tomasz Torcz <tomek@???> wrote:
>
> On Tue, Jun 21, 2022 at 09:13:35PM -0500, o1bigtenor via Dng wrote:
> > On Tue, Jun 21, 2022 at 5:16 PM tito via Dng <dng@???> wrote:
> > >
> > > On Tue, 21 Jun 2022 17:10:51 -0500
> > > o1bigtenor via Dng <dng@???> wrote:
> > >
> > > > Greetings
> > > >
> > > > Bought a mobo that said that there was room for 8 SATA ports and 2 M2 drives.
> > > >
> > > > It took looking in the fine print to find that when using M2 drives
> > > > that one loses an
> > > > SATA port for each M2 drive.
>
> They may be SATA-only M.2, not NVMe. Read the manual closely.
>
> > > > Have found some PCIe 3.0 cards with 16 SATA port count.
> > > >
> > > > Do I need any kind of special driver to use this many SATA ports?
> > >
> > > What kind of SATA cards (brand, model, chip)?
> > >
> >
> > SATA PCIe Adapter 16 Port SATA III to PCI Express 3.0 X1 Controller
> > Expansion Card ASM1064 JBM575 Chip
>
> Best try is always to search for the chip markings. You would find
> this thread:
> https://lore.kernel.org/linux-ide/05f0db0a-e961-0f68-4302-68be034594af@opensource.wdc.com/T/
> There's a slight difference (ASM1062 vs ASM1064) but the card should work with
> standard AHCI driver (you may need to add pciids or bind the driver to
> the card).


In inverse order:
This particular chip '1064' is not listed in the pci.id directory
although the company is.
Will that cause problems for my use?
Binding the driver to the card does not look at all straightforward.
If this is something that
I would need to do - - - - would I be able to get assistance (please)?

Reading in ASMedia Technologies web site.
in ascending order:
1061 - - - 2 ports
1062 - - - Gen 2 x 2 (pcie) - 2 ports
1064 - - - Gen 3 x 1 (pcie) - 4 ports
1164 - - - Gen 3 x 2 (pcie) - 4 ports
1166 - - - Gen 3 x 2 (pcie) - 6 ports

The AHCI driver lists the ASM1062 and also the ASM1062 with the JMB575.
There is no listing for the 1064 or the other two newer chips.
Does this mean that I might have issues using this card?

Greatly appreciating the gentle introduction to the arcane arts of 'under the
hood tinkering' (!!!).

Thank you greatly for your assistance.

Aj

>
>
> --
> Tomasz Torcz                                                       72->|   80->|
> tomek@???                                               72->|   80->|

>
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng