:: Re: [DNG] install on a raid 1 array
Page principale
Supprimer ce message
Répondre à ce message
Auteur: o1bigtenor
Date:  
CC: Devuan ML
Sujet: Re: [DNG] install on a raid 1 array
On Wed, Jun 1, 2022 at 4:57 PM tito via Dng <dng@???> wrote:
>
> On Wed, 1 Jun 2022 16:34:21 -0500
> o1bigtenor via Dng <dng@???> wrote:
>
> > Greetings
> >
> > When the parts get here I'm going to be installing Devuan testing on
> > the system.
> >
> > I have not ever installed like this so first the configuration.
> >
> > Ryzen 7 3800X
> > Asus TUF Gaming X570-Pro mobo
> > 64 GB ram
> > 2 - 1 TB M2 drives
> > 2 - 1 TB SSDs
> >
> > I want to set the system up so that the drives are 2 sets of Raid-1 with
> > (proposed)
> > set 1
> > /efi, /boot, /, /usr, /usr/local, /var, swap
> > set 2
> > /home
> >
> > How do I set up the raid arrays?
>
> They could be easily setup during installation process in the disk partitioning step if I recall
> it correctly. See https://wiki.debian.org/DebianInstaller/SoftwareRaidRoot
> for more info (just the first part).


Interesting - - - that wiki is current as of 2012.
That's why I wasn't trusting the information - - - - the newest stuff
I could find was
some 3 or 4 years old and I've found that newer stuff has different
gotchas than
the older versions.

The assumption is that LLVM is used on top of the array. (from the wiki)
Is that necessary?
(I've never used LLVM to date!)

My idea was to partition the disks just like normal after the array was built.
Is that possible?

TIA