:: Re: [DNG] mouse driver question
Página superior
Eliminar este mensaje
Responder a este mensaje
Autor: Fred
Fecha:  
A: dng
Asunto: Re: [DNG] mouse driver question
Hi Karl,

On 5/11/22 08:23, karl@??? wrote:
> Fred:
>> On 5/11/22 05:02, karl@??? wrote:
>
>>> You should be able to do lsinput from input-utils package to see which
>>> /dev/input/inputX file your mouse's byte stream transformed as events
>>> would appear. And then run input-events X to see the events. E.g.:
>>>
>>> # lsinput | tail
>>> open /dev/input/event11: No such device or address
>>>
>>> /dev/input/event10
>>>      bustype : BUS_I8042
>>>      vendor  : 0x2
>>>      product : 0xa
>>>      version : 0
>>>      name    : "TPPS/2 IBM TrackPoint"
>>>      phys    : "isa0060/serio1/input0"
>>>      bits ev : (null) (null) (null)
>> Why did you pick event10?

>
> Because that where the mouse is as shown by the lsinput output.
>
>> I have event0 to 21 also mice and mouse0 in that directory.

The reason I asked is that when I ran your command line I got one
paragraph with the name"ALSA". My mouse is tied to event0 whether pc
mouse or Sun.

> Run lsinput and choose.
>
> Here ia another example:
>
> # modprobe sermouse
> # ./inputattach --daemon --mouseman /dev/ttyS0
> # tail -2 /var/log/all
> May 11 15:01:30 zoisit user.info kernel: [15477.331554] input: Logitech M+ Mouse as /devices/pnp0/00:01/tty/ttyS0/serio3/input/input19
> May 11 15:01:30 zoisit user.info kernel: [15477.332229] serio: Serial port ttyS0
> # lsinput | tail
> open /dev/input/event18: No such device or address
>
> /dev/input/event17
>     bustype : BUS_RS232
>     vendor  : 0x4
>     product : 0x1
>     version : 256
>     name    : "Logitech M+ Mouse"
>     phys    : "ttyS0/serio0/input0"
>     bits ev : (null) (null) (null)

>
> # input-events 17
> /dev/input/event17
>     bustype : BUS_RS232
>     vendor  : 0x4
>     product : 0x1
>     version : 256
>     name    : "Logitech M+ Mouse"
>     phys    : "ttyS0/serio0/input0"
>     bits ev : (null) (null) (null)

>
> waiting for events
> 15:13:30.888773: (null) ??? (0x112) pressed
> 15:13:30.888773: (null) code=0 value=0
> 15:13:32.998688: (null) ??? -1
> 15:13:32.998688: (null) code=0 value=0
> 15:13:33.061029: (null) ??? -1
> 15:13:33.061029: (null) code=0 value=0
> 15:13:33.560736: (null) ??? 1
> 15:13:33.560736: (null) code=0 value=0
> 15:13:33.583775: (null) ??? 3
> 15:13:33.583775: (null) code=0 value=0
> 15:13:33.591262: (null) ??? 3
> 15:13:33.591262: (null) code=0 value=0
> 15:13:33.614295: (null) ??? 1
> 15:13:33.614295: (null) code=0 value=0
> 15:13:33.621787: (null) ??? 2
> 15:13:33.621787: (null) code=0 value=0
> 15:13:34.191695: (null) ??? 1
> 15:13:34.191695: (null) code=0 value=0
> 15:13:34.302401: (null) ??? 1
> 15:13:34.302401: (null) code=0 value=0
> 15:13:34.553504: (null) ??? (0x112) released
> 15:13:34.553504: (null) code=0 value=0
> ...
>
> Here above we can see the middle button pressed, the mouse moved, and
> the button released.

input-events produces essentially the same as you show. All three
buttons work similarly.


>> I think we are barking up the wrong tree here. The application sees the
>> button because the pointer freezes when it is pressed. What is missing
>> is X and Y movement info. while the button is pressed.
>
> With the above example we can check if that is true.
>
> Another way to test this is to use xev. Start xev, move the mouse xev's
> window, press button, move, release, check the result:
>
> ButtonPress event, serial 33, synthetic NO, window 0x3200001,
>      root 0x4d3, subw 0x0, time 243503614, (56,88), root:(360,300),
>      state 0x0, button 1, same_screen YES

>
> MotionNotify event, serial 33, synthetic NO, window 0x3200001,
>      root 0x4d3, subw 0x0, time 243504966, (57,88), root:(361,300),
>      state 0x100, is_hint 0, same_screen YES

>
> MotionNotify event, serial 33, synthetic NO, window 0x3200001,
>      root 0x4d3, subw 0x0, time 243504989, (59,89), root:(363,301),
>      state 0x100, is_hint 0, same_screen YES

>
> MotionNotify event, serial 33, synthetic NO, window 0x3200001,
>      root 0x4d3, subw 0x0, time 243505012, (60,90), root:(364,302),
>      state 0x100, is_hint 0, same_screen YES

>
> ButtonRelease event, serial 33, synthetic NO, window 0x3200001,
>      root 0x4d3, subw 0x0, time 243505908, (60,90), root:(364,302),
>      state 0x100, button 1, same_screen YES

>
> Regards,
> /Karl Hammar
>
>
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng

With xev, buttons 1 and 3 are correctly identified but the middle button
is randomly assigned 4,5,6 or 7. Possibly this is the problem as I know
the application is expecting button 2.

Best regards,
Fred