:: Re: [DNG] mouse driver question
Startseite
Nachricht löschen
Nachricht beantworten
Autor: karl
Datum:  
To: dng
Betreff: Re: [DNG] mouse driver question
Fred:
> On 5/11/22 05:02, karl@??? wrote:


> > You should be able to do lsinput from input-utils package to see which
> > /dev/input/inputX file your mouse's byte stream transformed as events
> > would appear. And then run input-events X to see the events. E.g.:
> >
> > # lsinput | tail
> > open /dev/input/event11: No such device or address
> >
> > /dev/input/event10
> >     bustype : BUS_I8042
> >     vendor  : 0x2
> >     product : 0xa
> >     version : 0
> >     name    : "TPPS/2 IBM TrackPoint"
> >     phys    : "isa0060/serio1/input0"
> >     bits ev : (null) (null) (null)
> Why did you pick event10?


Because that where the mouse is as shown by the lsinput output.

> I have event0 to 21 also mice and mouse0 in that directory.


Run lsinput and choose.

Here ia another example:

# modprobe sermouse
# ./inputattach --daemon --mouseman /dev/ttyS0
# tail -2 /var/log/all
May 11 15:01:30 zoisit user.info kernel: [15477.331554] input: Logitech M+ Mouse as /devices/pnp0/00:01/tty/ttyS0/serio3/input/input19
May 11 15:01:30 zoisit user.info kernel: [15477.332229] serio: Serial port ttyS0
# lsinput | tail
open /dev/input/event18: No such device or address

/dev/input/event17
   bustype : BUS_RS232
   vendor  : 0x4
   product : 0x1
   version : 256
   name    : "Logitech M+ Mouse"
   phys    : "ttyS0/serio0/input0"
   bits ev : (null) (null) (null)


# input-events 17
/dev/input/event17
   bustype : BUS_RS232
   vendor  : 0x4
   product : 0x1
   version : 256
   name    : "Logitech M+ Mouse"
   phys    : "ttyS0/serio0/input0"
   bits ev : (null) (null) (null)


waiting for events
15:13:30.888773: (null) ??? (0x112) pressed
15:13:30.888773: (null) code=0 value=0
15:13:32.998688: (null) ??? -1
15:13:32.998688: (null) code=0 value=0
15:13:33.061029: (null) ??? -1
15:13:33.061029: (null) code=0 value=0
15:13:33.560736: (null) ??? 1
15:13:33.560736: (null) code=0 value=0
15:13:33.583775: (null) ??? 3
15:13:33.583775: (null) code=0 value=0
15:13:33.591262: (null) ??? 3
15:13:33.591262: (null) code=0 value=0
15:13:33.614295: (null) ??? 1
15:13:33.614295: (null) code=0 value=0
15:13:33.621787: (null) ??? 2
15:13:33.621787: (null) code=0 value=0
15:13:34.191695: (null) ??? 1
15:13:34.191695: (null) code=0 value=0
15:13:34.302401: (null) ??? 1
15:13:34.302401: (null) code=0 value=0
15:13:34.553504: (null) ??? (0x112) released
15:13:34.553504: (null) code=0 value=0
...

Here above we can see the middle button pressed, the mouse moved, and
the button released.

> I think we are barking up the wrong tree here. The application sees the
> button because the pointer freezes when it is pressed. What is missing
> is X and Y movement info. while the button is pressed.


With the above example we can check if that is true.

Another way to test this is to use xev. Start xev, move the mouse xev's
window, press button, move, release, check the result:

ButtonPress event, serial 33, synthetic NO, window 0x3200001,
    root 0x4d3, subw 0x0, time 243503614, (56,88), root:(360,300),
    state 0x0, button 1, same_screen YES


MotionNotify event, serial 33, synthetic NO, window 0x3200001,
    root 0x4d3, subw 0x0, time 243504966, (57,88), root:(361,300),
    state 0x100, is_hint 0, same_screen YES


MotionNotify event, serial 33, synthetic NO, window 0x3200001,
    root 0x4d3, subw 0x0, time 243504989, (59,89), root:(363,301),
    state 0x100, is_hint 0, same_screen YES


MotionNotify event, serial 33, synthetic NO, window 0x3200001,
    root 0x4d3, subw 0x0, time 243505012, (60,90), root:(364,302),
    state 0x100, is_hint 0, same_screen YES


ButtonRelease event, serial 33, synthetic NO, window 0x3200001,
    root 0x4d3, subw 0x0, time 243505908, (60,90), root:(364,302),
    state 0x100, button 1, same_screen YES


Regards,
/Karl Hammar