:: [devuan-dev] bug#665: linux-image-5…
Top Pagina
Delete this message
Reply to this message
Auteur: GIRAUDEAU-BOCQUET, LIONEL
Datum:  
Aan: Devuan Bug Tracking System
Onderwerp: [devuan-dev] bug#665: linux-image-5.10.0-11-amd64: AACRAID raid volumes are not ready before a minute at boot time
Package: src:linux
Version: 5.10.92-1
Severity: normal
X-Debbugs-Cc: lionel.giraudeau@???

Dear Maintainer,

The machine uses an old raid controller :
84:00.0 RAID bus controller: Adaptec AAC-RAID (rev 09)
        Subsystem: Adaptec ASR5805


Everything was working well with linux-4.19.0-18-amd64 (and still works
properly if you choose to boot it).

Trying to boot on 5.10.0-11 (after upgrade from Devuan3 to 4) leads to :
"Gave up waiting for root file system device.".
At the BusyBox prompt just wait for a few seconds to see the appearance of
disk partitions/devices :
"[sda] 975153152 512-byte logical blocks: (499 GB/465 GiB)"
then type "exit", and the boot sequence continues as expected.

This machine is a server, it is not meant to be rebooted often, so for the
minute I did nothing at all (I can use "ipmi sol activate" if needed).
I could just give it more time waiting for the devices, which would be a
simple workaround.
Another "solution" is to just boot the "old" 4.19 kernel.
But I am rather expecting 5.10.0-11 to have the same behavior as 4.19.0-18.


-- Package-specific info:
** Version:
Linux version 5.10.0-11-amd64 (debian-kernel@???) (gcc-10
(Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2)
#1 SMP Debian 5.10.92-1 (2022-01-18)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.10.0-11-amd64
root=UUID=b2a4b397-1c2c-4f9f-8f2c-06e7db328a0c ro console=tty0
console=ttyS2,115200

** Tainted: I (2048)
* workaround for bug in platform firmware applied

** Kernel log:
See attachements :
- dmesg.txt : "dmesg" output from terminal
- bug_aacraid.txt : sorted out console's output at boot time

** Model information
sys_vendor: Bull SAS
product_name: bullx
product_version: R423-E2
chassis_vendor: Supermicro
chassis_version: 1234567890
bios_vendor: American Megatrends Inc.
bios_version: 2.0a    
board_vendor: Supermicro
board_name: X8DAH
board_version: 1234567890


** Loaded modules:
firewire_sbp2
intel_powerclamp
ipmi_si
coretemp
ipmi_devintf
intel_cstate
intel_uncore
ipmi_msghandler
mgag200
serio_raw
pcspkr
iTCO_wdt
drm_kms_helper
intel_pmc_bxt
cec
iTCO_vendor_support
i5500_temp
drm
watchdog
evdev
joydev
snd_hda_codec_realtek
snd_hda_codec_generic
ledtrig_audio
snd_hda_intel
snd_intel_dspcfg
soundwire_intel
soundwire_generic_allocation
button
snd_soc_core
snd_compress
soundwire_cadence
snd_hda_codec
snd_hda_core
snd_hwdep
soundwire_bus
snd_pcm
snd_timer
snd
soundcore
i7core_edac
ioatdma
acpi_cpufreq
ext4
crc16
mbcache
jbd2
crc32c_generic
sr_mod
cdrom
sd_mod
sg
ses
enclosure
scsi_transport_sas
mlx4_ib
ib_uverbs
ib_core
hid_generic
usbhid
hid
lpfc
nvmet_fc
nvmet
nvme_fc
nvme_fabrics
nvme_core
uhci_hcd
ehci_pci
t10_pi
crc_t10dif
ehci_hcd
ahci
ata_generic
crct10dif_generic
igb
libahci
pata_jmicron
aacraid
i2c_algo_bit
firewire_ohci
libata
scsi_transport_fc
mlx4_core
i2c_i801
dca
firewire_core
i2c_smbus
crc_itu_t
ptp
psmouse
crc32c_intel
usbcore
configfs
scsi_mod
lpc_ich
usb_common
pps_core
crct10dif_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port
[8086:3406] (rev 22)
    Subsystem: Super Micro Computer Inc 5520 I/O Hub to ESI Port
[15d9:0100]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    NUMA node: 0
    Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
        Address: 00000000  Data: 0000
        Masking: 00000000  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x4 (ok)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
        RootCap: CRSVisible-
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp-
ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis-
LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn- NFERptEn- FERptEn-
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [150 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
UpstreamFwd+ EgressCtrl- DirectTrans-
        ACSCtl:    SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
    Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0
Len=00c <?>


00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 1 [8086:3408] (rev 22) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin ? routed to IRQ 24
    NUMA node: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000b000-0000bfff [size=4K]
    Memory behind bridge: fa200000-fa3fffff [size=2M]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Super Micro Computer Inc 5520/5500/X58
I/O Hub PCI Express Root Port 1 [15d9:0100]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00000  Data: 40ef
        Masking: 00000003  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 256 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x4 (ok)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
            Slot #5, PowerLimit 25.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
            Changed: MRL- PresDet+ LinkState+
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp-
ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis-
LTR- OBFF Disabled, ARIFwd+
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn- NFERptEn- FERptEn-
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [150 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
UpstreamFwd+ EgressCtrl- DirectTrans-
        ACSCtl:    SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
    Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0
Len=00c <?>
    Kernel driver in use: pcieport


00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 3 [8086:340a] (rev 22) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin ? routed to IRQ 25
    NUMA node: 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000c000-0000cfff [size=4K]
    Memory behind bridge: fbc00000-fbcfffff [size=1M]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Super Micro Computer Inc 5520/5500/X58
I/O Hub PCI Express Root Port 3 [15d9:0100]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00000  Data: 40ef
        Masking: 00000003  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 256 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x8 (downgraded)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
            Slot #2, PowerLimit 25.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
            Changed: MRL- PresDet+ LinkState+
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp-
ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis-
LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn- NFERptEn- FERptEn-
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [150 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
UpstreamFwd+ EgressCtrl- DirectTrans-
        ACSCtl:    SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
    Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0
Len=00c <?>
    Kernel driver in use: pcieport


00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 7 [8086:340e] (rev 22) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin ? routed to IRQ 26
    NUMA node: 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: [disabled]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Super Micro Computer Inc 5520/5500/X58
I/O Hub PCI Express Root Port 7 [15d9:0100]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00000  Data: 40ef
        Masking: 00000003  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x0 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
            Slot #3, PowerLimit 25.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
            Changed: MRL- PresDet+ LinkState-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp-
ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis-
LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn- NFERptEn- FERptEn-
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [150 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
UpstreamFwd+ EgressCtrl- DirectTrans-
        ACSCtl:    SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
    Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0
Len=00c <?>
    Kernel driver in use: pcieport


00:09.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 9 [8086:3410] (rev 22) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin ? routed to IRQ 27
    NUMA node: 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: [disabled]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Super Micro Computer Inc
7500/5520/5500/X58 I/O Hub PCI Express Root Port 9 [15d9:0100]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00000  Data: 40ef
        Masking: 00000003  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x0 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
            Slot #1, PowerLimit 25.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
            Changed: MRL- PresDet+ LinkState-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp-
ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis-
LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn- NFERptEn- FERptEn-
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [150 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
UpstreamFwd+ EgressCtrl- DirectTrans-
        ACSCtl:    SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
    Kernel driver in use: pcieport


00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System
Management Registers [8086:342e] (rev 22) (prog-if 00 [8259])
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    NUMA node: 0
    Capabilities: [40] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis-
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Kernel driver in use: i7core_edac
    Kernel modules: i7core_edac


00:16.0 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3430] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 0
    Region 0: Memory at fbef8000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


00:16.1 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3431] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin B routed to IRQ 17
    NUMA node: 0
    Region 0: Memory at fbef4000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


00:16.2 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3432] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin C routed to IRQ 18
    NUMA node: 0
    Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


00:16.3 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3433] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin D routed to IRQ 19
    NUMA node: 0
    Region 0: Memory at fbeec000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


00:16.4 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3429] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 0
    Region 0: Memory at fbee8000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


00:16.5 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:342a] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin B routed to IRQ 17
    NUMA node: 0
    Region 0: Memory at fbee4000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


00:16.6 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:342b] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin C routed to IRQ 18
    NUMA node: 0
    Region 0: Memory at fbee0000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


00:16.7 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:342c] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin D routed to IRQ 19
    NUMA node: 0
    Region 0: Memory at fbedc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) USB UHCI
Controller [15d9:0100]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    NUMA node: 0
    Region 4: I/O ports at 9c00 [size=32]
    Capabilities: [50] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci_hcd


00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) USB UHCI
Controller [15d9:0100]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 21
    NUMA node: 0
    Region 4: I/O ports at 9880 [size=32]
    Capabilities: [50] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci_hcd


00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) USB UHCI
Controller [15d9:0100]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin D routed to IRQ 19
    NUMA node: 0
    Region 4: I/O ports at 9800 [size=32]
    Capabilities: [50] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci_hcd


00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) USB2 EHCI
Controller [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    NUMA node: 0
    Region 0: Memory at fbeda000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci


00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller [8086:3a3e]
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) HD Audio
Controller [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 89
    NUMA node: 0
    Region 0: Memory at fbed4000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Address: 00000000fee00000  Data: 4024
    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE- FLReset+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
FLReset-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+
TransPend-
    Capabilities: [100 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
            Status:    NegoPending- InProgress-
        VC1:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
            Ctrl:    Enable- ID=0 ArbSelect=Fixed TC/VC=00
            Status:    NegoPending- InProgress-
    Capabilities: [130 v1] Root Complex Link
        Desc:    PortNumber=0f ComponentID=00 EltType=Config
        Link0:    Desc:    TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
            Addr:    00000000fed1c000
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel


00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI
Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 17
    NUMA node: 0
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff [size=4K]
    Memory behind bridge: fbd00000-fbdfffff [size=1M]
    Prefetchable memory behind bridge: 00000000fa000000-00000000fa1fffff
[size=2M]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+
TransPend-
        LnkCap:    Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <256ns, L1 <4us
            ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
            Slot #0, PowerLimit 10.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
            Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
            Changed: MRL- PresDet+ LinkState+
        RootCap: CRSVisible-
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Address: 00000000  Data: 0000
    Capabilities: [90] Subsystem: Super Micro Computer Inc 82801JI
(ICH10 Family) PCI Express Root Port 1 [15d9:0100]
    Capabilities: [a0] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed+ WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128-
WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status:    NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
        Desc:    PortNumber=01 ComponentID=00 EltType=Config
        Link0:    Desc:    TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
            Addr:    00000000fed1c000
    Kernel driver in use: pcieport


00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) USB UHCI
Controller [15d9:0100]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    NUMA node: 0
    Region 4: I/O ports at 9480 [size=32]
    Capabilities: [50] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci_hcd


00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) USB UHCI
Controller [15d9:0100]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 19
    NUMA node: 0
    Region 4: I/O ports at 9400 [size=32]
    Capabilities: [50] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci_hcd


00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) USB UHCI
Controller [15d9:0100]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    NUMA node: 0
    Region 4: I/O ports at 9080 [size=32]
    Capabilities: [50] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci_hcd


00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) USB2 EHCI
Controller [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    NUMA node: 0
    Region 0: Memory at fbed8000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Capabilities: [98] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci


00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e]
(rev 90) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    NUMA node: 0
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
    I/O behind bridge: [disabled]
    Memory behind bridge: faf00000-fb7fffff [size=9M]
    Prefetchable memory behind bridge: 00000000f9000000-00000000f9ffffff
[size=16M]
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [50] Subsystem: Super Micro Computer Inc 82801 PCI
Bridge [15d9:0100]


00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller [8086:3a16]
    Subsystem: Super Micro Computer Inc 82801JIR (ICH10R) LPC Interface
Controller [15d9:0100]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    NUMA node: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: lpc_ich
    Kernel modules: lpc_ich


00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family)
SATA AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0])
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) SATA AHCI
Controller [15d9:0100]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 42
    NUMA node: 0
    Region 0: I/O ports at 8480 [size=8]
    Region 1: I/O ports at 9000 [size=4]
    Region 2: I/O ports at 8c00 [size=8]
    Region 3: I/O ports at 8880 [size=4]
    Region 4: I/O ports at 8800 [size=32]
    Region 5: Memory at fbed2000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
        Address: fee04000  Data: 4022
    Capabilities: [70] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
    Capabilities: [b0] PCI Advanced Features
        AFCap: TP+ FLR+
        AFCtrl: FLR-
        AFStatus: TP-
    Kernel driver in use: ahci
    Kernel modules: ahci


00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus
Controller [8086:3a30]
    Subsystem: Super Micro Computer Inc 82801JI (ICH10 Family) SMBus
Controller [15d9:0100]
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin C routed to IRQ 18
    NUMA node: 0
    Region 0: Memory at fbed0000 (64-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at 1000 [size=32]
    Kernel driver in use: i801_smbus
    Kernel modules: i2c_i801


01:00.0 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network
Connection [8086:10c9] (rev 01)
    Subsystem: Super Micro Computer Inc 82576 Gigabit Network Connection
[15d9:0100]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 0
    Region 0: Memory at fa200000 (32-bit, non-prefetchable) [size=128K]
    Region 1: Memory at fa220000 (32-bit, non-prefetchable) [size=128K]
    Region 2: I/O ports at bc00 [size=32]
    Region 3: Memory at fa2c0000 (32-bit, non-prefetchable) [size=16K]
    Expansion ROM at fa240000 [disabled] [size=128K]
    Capabilities: [40] Power Management version 3
        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
        Address: 0000000000000000  Data: 0000
        Masking: 00000000  Pending: 00000000
    Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
        Vector table: BAR=3 offset=00000000
        PBA: BAR=3 offset=00002000
    Capabilities: [a0] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 512 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
FLReset-
            MaxPayload 256 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+
TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit
Latency L0s <4us, L1 <64us
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x4 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [140 v1] Device Serial Number 00-25-90-ff-ff-6a-6c-5c
    Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
        ARICap:    MFVC- ACS-, Next Function: 1
        ARICtl:    MFVC- ACS-, Function Group: 0
    Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
        IOVCap:    Migration-, Interrupt Message Number: 000
        IOVCtl:    Enable- Migration- Interrupt- MSE- ARIHierarchy+
        IOVSta:    Migration-
        Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function
Dependency Link: 00
        VF offset: 128, stride: 2, Device ID: 10ca
        Supported Page Size: 00000553, System Page Size: 00000001
        Region 0: Memory at 00000000fa2c4000 (64-bit,
non-prefetchable)
        Region 3: Memory at 00000000fa2e4000 (64-bit,
non-prefetchable)
        VF Migration: offset: 00000000, BIR: 0
    Kernel driver in use: igb
    Kernel modules: igb


01:00.1 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network
Connection [8086:10c9] (rev 01)
    Subsystem: Super Micro Computer Inc 82576 Gigabit Network Connection
[15d9:0100]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin B routed to IRQ 17
    NUMA node: 0
    Region 0: Memory at fa260000 (32-bit, non-prefetchable) [size=128K]
    Region 1: Memory at fa280000 (32-bit, non-prefetchable) [size=128K]
    Region 2: I/O ports at b880 [size=32]
    Region 3: Memory at fa304000 (32-bit, non-prefetchable) [size=16K]
    Expansion ROM at fa2a0000 [disabled] [size=128K]
    Capabilities: [40] Power Management version 3
        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
        Address: 0000000000000000  Data: 0000
        Masking: 00000000  Pending: 00000000
    Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
        Vector table: BAR=3 offset=00000000
        PBA: BAR=3 offset=00002000
    Capabilities: [a0] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 512 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
FLReset-
            MaxPayload 256 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+
TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit
Latency L0s <4us, L1 <64us
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x4 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [140 v1] Device Serial Number 00-25-90-ff-ff-6a-6c-5c
    Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
        ARICap:    MFVC- ACS-, Next Function: 0
        ARICtl:    MFVC- ACS-, Function Group: 0
    Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
        IOVCap:    Migration-, Interrupt Message Number: 000
        IOVCtl:    Enable- Migration- Interrupt- MSE- ARIHierarchy-
        IOVSta:    Migration-
        Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function
Dependency Link: 01
        VF offset: 128, stride: 2, Device ID: 10ca
        Supported Page Size: 00000553, System Page Size: 00000001
        Region 0: Memory at 00000000fa308000 (64-bit,
non-prefetchable)
        Region 3: Memory at 00000000fa328000 (64-bit,
non-prefetchable)
        VF Migration: offset: 00000000, BIR: 0
    Kernel driver in use: igb
    Kernel modules: igb


02:00.0 Fibre Channel [0c04]: Emulex Corporation LPe12000 Series 8Gb Fibre
Channel Adapter [10df:f100] (rev 03)
    Subsystem: Emulex Corporation Saturn-X: LightPulse Fibre Channel
Host Adapter [10df:f100]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 0
    Region 0: Memory at fbcba000 (64-bit, non-prefetchable) [size=4K]
    Region 2: Memory at fbcbc000 (64-bit, non-prefetchable) [size=16K]
    Region 4: I/O ports at c800 [size=256]
    Expansion ROM at fbcc0000 [disabled] [size=256K]
    Capabilities: [58] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable- Count=1/16 Maskable+ 64bit+
        Address: 0000000000000000  Data: 0000
        Masking: 00000000  Pending: 00000000
    Capabilities: [78] MSI-X: Enable+ Count=32 Masked-
        Vector table: BAR=2 offset=00002000
        PBA: BAR=2 offset=00003000
    Capabilities: [84] Vital Product Data
        Product Name: LPe12002, 8GB/S, 2-PORT, FC, PCI EXPRESS HBA,
DIAG, OPTICS
        Read-only fields:
            [PN] Part number: LPE12002-M8
            [SN] Serial number: FC14925778
            [V0] Vendor specific: FC14925778
            [V1] Vendor specific: Emulex LPe12002-M8 8Gb 2-port
PCIe Fibre Channel Adapter
            [V2] Vendor specific: LPe12002-M8
            [V3] Vendor specific:
T2:78,T3:79,7A,7B,7D,7E,7F,T7:73,TB:73,TFF:78
            [V4] Vendor specific: 0
            [RV] Reserved: checksum bad, 22 byte(s) reserved
        End
    Capabilities: [94] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 2048 bytes, PhantFunc 0, Latency L0s
<1us, L1 unlimited
            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 25.000W
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 256 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x8, ASPM L0s, Exit
Latency L0s <4us
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x8 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
ECRCChkCap+ ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [12c v1] Power Budgeting <?>
    Kernel driver in use: lpfc
    Kernel modules: lpfc


02:00.1 Fibre Channel [0c04]: Emulex Corporation LPe12000 Series 8Gb Fibre
Channel Adapter [10df:f100] (rev 03)
    Subsystem: Emulex Corporation Saturn-X: LightPulse Fibre Channel
Host Adapter [10df:f100]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin B routed to IRQ 17
    NUMA node: 0
    Region 0: Memory at fbc3a000 (64-bit, non-prefetchable) [size=4K]
    Region 2: Memory at fbc3c000 (64-bit, non-prefetchable) [size=16K]
    Region 4: I/O ports at c400 [size=256]
    Expansion ROM at fbc40000 [disabled] [size=256K]
    Capabilities: [58] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable- Count=1/16 Maskable+ 64bit+
        Address: 0000000000000000  Data: 0000
        Masking: 00000000  Pending: 00000000
    Capabilities: [78] MSI-X: Enable+ Count=32 Masked-
        Vector table: BAR=2 offset=00002000
        PBA: BAR=2 offset=00003000
    Capabilities: [84] Vital Product Data
        Product Name: LPe12002, 8GB/S, 2-PORT, FC, PCI EXPRESS HBA,
DIAG, OPTICS
        Read-only fields:
            [PN] Part number: LPE12002-M8
            [SN] Serial number: FC14925778
            [V0] Vendor specific: FC14925778
            [V1] Vendor specific: Emulex LPe12002-M8 8Gb 2-port
PCIe Fibre Channel Adapter
            [V2] Vendor specific: LPe12002-M8
            [V3] Vendor specific:
T2:78,T3:79,7A,7B,7D,7E,7F,T7:73,TB:73,TFF:78
            [V4] Vendor specific: 1
            [RV] Reserved: checksum bad, 22 byte(s) reserved
        End
    Capabilities: [94] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 2048 bytes, PhantFunc 0, Latency L0s
<1us, L1 unlimited
            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 25.000W
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 256 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x8, ASPM L0s, Exit
Latency L0s <4us
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x8 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
ECRCChkCap+ ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [12c v1] Power Budgeting <?>
    Kernel driver in use: lpfc
    Kernel modules: lpfc


05:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller
[197b:2368] (prog-if 85 [PCI native mode-only controller, supports bus
mastering])
    Subsystem: JMicron Technology Corp. JMB368 IDE controller
[197b:2368]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 0
    Region 0: I/O ports at d400 [size=8]
    Region 1: I/O ports at dc00 [size=4]
    Region 2: I/O ports at d880 [size=8]
    Region 3: I/O ports at d800 [size=4]
    Region 4: I/O ports at d480 [size=16]
    Expansion ROM at fbdf0000 [disabled] [size=64K]
    Capabilities: [68] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
        DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Exit
Latency L0s unlimited
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x1 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
        Address: 00000000  Data: 0000
    Kernel driver in use: pata_jmicron
    Kernel modules: pata_jmicron, ata_generic


06:04.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd.
MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
    Subsystem: Super Micro Computer Inc MGA G200eW WPCM450 [15d9:0100]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 0
    Region 0: Memory at f9000000 (32-bit, prefetchable) [size=16M]
    Region 1: Memory at faffc000 (32-bit, non-prefetchable) [size=16K]
    Region 2: Memory at fb000000 (32-bit, non-prefetchable) [size=8M]
    Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
    Capabilities: [dc] Power Management version 1
        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: mgag200
    Kernel modules: matroxfb_base, mgag200


06:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A
IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10
[OHCI])
    Subsystem: Super Micro Computer Inc TSB43AB22A IEEE-1394a-2000
Controller (PHY/Link) [iOHCI-Lynx] [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (500ns min, 1000ns max), Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 17
    NUMA node: 0
    Region 0: Memory at faff6000 (32-bit, non-prefetchable) [size=2K]
    Region 1: Memory at faff8000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
    Kernel driver in use: firewire_ohci
    Kernel modules: firewire_ohci


80:00.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI
Express Root Port 0 [8086:3420] (rev 22) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin ? routed to IRQ 28
    NUMA node: 1
    Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: [disabled]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Super Micro Computer Inc
7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 [15d9:0100]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00000  Data: 40ef
        Masking: 00000003  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x0 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp-
ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn- NFERptEn- FERptEn-
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [150 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
UpstreamFwd+ EgressCtrl- DirectTrans-
        ACSCtl:    SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
    Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0
Len=00c <?>
    Kernel driver in use: pcieport


80:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 1 [8086:3408] (rev 22) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin ? routed to IRQ 29
    NUMA node: 1
    Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: [disabled]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Super Micro Computer Inc 5520/5500/X58
I/O Hub PCI Express Root Port 1 [15d9:0100]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00000  Data: 40ef
        Masking: 00000003  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x0 (downgraded)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
            Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
            Changed: MRL- PresDet+ LinkState-
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp-
ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis-
LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn- NFERptEn- FERptEn-
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [150 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
UpstreamFwd+ EgressCtrl- DirectTrans-
        ACSCtl:    SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
    Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0
Len=00c <?>
    Kernel driver in use: pcieport


80:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 3 [8086:340a] (rev 22) (prog-if 00 [Normal decode])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin ? routed to IRQ 30
    NUMA node: 1
    Bus: primary=80, secondary=83, subordinate=83, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: f8a00000-f8afffff [size=1M]
    Prefetchable memory behind bridge: 00000000f7800000-00000000f7ffffff
[size=8M]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Super Micro Computer Inc 5520/5500/X58
I/O Hub PCI Express Root Port 3 [15d9:0100]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00000  Data: 40ef
        Masking: 00000003  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 256 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 5GT/s (ok), Width x8 (ok)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
            Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
            Changed: MRL- PresDet+ LinkState+
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp-
ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis-
LTR- OBFF Disabled, ARIFwd+
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn- NFERptEn- FERptEn-
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [150 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
UpstreamFwd+ EgressCtrl- DirectTrans-
        ACSCtl:    SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
    Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0
Len=00c <?>
    Kernel driver in use: pcieport


80:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express
Root Port 5 [8086:340c] (rev 22) (prog-if 00 [Normal decode])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin ? routed to IRQ 31
    NUMA node: 1
    Bus: primary=80, secondary=84, subordinate=84, sec-latency=0
    I/O behind bridge: [disabled]
    Memory behind bridge: f8b00000-f8dfffff [size=3M]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Super Micro Computer Inc 5520/X58 I/O
Hub PCI Express Root Port 5 [15d9:0100]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00000  Data: 40ef
        Masking: 00000003  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 256 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x8 (ok)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
            Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
            Changed: MRL- PresDet+ LinkState+
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp-
ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis-
LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn- NFERptEn- FERptEn-
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [150 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
UpstreamFwd+ EgressCtrl- DirectTrans-
        ACSCtl:    SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
    Kernel driver in use: pcieport


80:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 7 [8086:340e] (rev 22) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin ? routed to IRQ 32
    NUMA node: 1
    Bus: primary=80, secondary=85, subordinate=85, sec-latency=0
    I/O behind bridge: 0000e000-0000efff [size=4K]
    Memory behind bridge: f8f00000-f8ffffff [size=1M]
    Prefetchable memory behind bridge: [disabled]
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: Super Micro Computer Inc 5520/5500/X58
I/O Hub PCI Express Root Port 7 [15d9:0100]
    Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
        Address: fee00000  Data: 40ef
        Masking: 00000003  Pending: 00000000
    Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0
            ExtTag+ RBE+
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 256 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <64us
            ClockPM- Surprise+ LLActRep+ BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x8 (downgraded)
            TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
            Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd Off, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
            Changed: MRL- PresDet+ LinkState+
        RootCap: CRSVisible+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible+
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Range BCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- LN System CLS Not Supported, TPHComp-
ExtTPHComp- ARIFwd+
             AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis-
LTR- OBFF Disabled, ARIFwd-
             AtomicOpsCtl: ReqEn- EgressBlck-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
        RootCmd: CERptEn- NFERptEn- FERptEn-
        RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
             FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
        ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
    Capabilities: [150 v1] Access Control Services
        ACSCap:    SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+
UpstreamFwd+ EgressCtrl- DirectTrans-
        ACSCtl:    SrcValid- TransBlk- ReqRedir- CmpltRedir-
UpstreamFwd- EgressCtrl- DirectTrans-
    Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0
Len=00c <?>
    Kernel driver in use: pcieport


80:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System
Management Registers [8086:342e] (rev 22) (prog-if 00 [8259])
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    NUMA node: 1
    Capabilities: [40] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis-
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Kernel modules: i7core_edac


80:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and
Scratch Pad Registers [8086:3422] (rev 22) (prog-if 00 [8259])
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    NUMA node: 1
    Capabilities: [40] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis-
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-


80:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control
Status and RAS Registers [8086:3423] (rev 22) (prog-if 00 [8259])
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    NUMA node: 1
    Capabilities: [40] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis-
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-


80:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle
Registers [8086:3438] (rev 22) (prog-if 00 [8259])
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    NUMA node: 1
    Kernel driver in use: i5500_temp
    Kernel modules: i5500_temp


80:16.0 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3430] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 1
    Region 0: Memory at f8efc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


80:16.1 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3431] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin B routed to IRQ 17
    NUMA node: 1
    Region 0: Memory at f8ef8000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


80:16.2 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3432] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin C routed to IRQ 18
    NUMA node: 1
    Region 0: Memory at f8ef4000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


80:16.3 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3433] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin D routed to IRQ 19
    NUMA node: 1
    Region 0: Memory at f8ef0000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


80:16.4 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:3429] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 1
    Region 0: Memory at f8eec000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


80:16.5 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:342a] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin B routed to IRQ 17
    NUMA node: 1
    Region 0: Memory at f8ee8000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


80:16.6 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:342b] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin C routed to IRQ 18
    NUMA node: 1
    Region 0: Memory at f8ee4000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


80:16.7 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset
QuickData Technology Device [8086:342c] (rev 22)
    Subsystem: Super Micro Computer Inc 5520/5500/X58 Chipset QuickData
Technology Device [15d9:0100]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin D routed to IRQ 19
    NUMA node: 1
    Region 0: Memory at f8ee0000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
        Vector table: BAR=0 offset=00002000
        PBA: BAR=0 offset=00003000
    Capabilities: [90] Express (v2) Root Complex Integrated Endpoint,
MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+ FLReset-
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
    Capabilities: [e0] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ioatdma
    Kernel modules: ioatdma


83:00.0 InfiniBand [0c06]: Mellanox Technologies MT25408A0-FCC-QI ConnectX,
Dual Port 40Gb/s InfiniBand / 10GigE Adapter IC with PCIe 2.0 x8 5.0GT/s
In... (rev b0)
    Subsystem: Mellanox Technologies MT25408A0-FCC-QI ConnectX, Dual
Port 40Gb/s InfiniBand / 10GigE Adapter IC with PCIe 2.0 x8 5.0GT/s
Interface [15b3:0022]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 1
    Region 0: Memory at f8a00000 (64-bit, non-prefetchable) [size=1M]
    Region 2: Memory at f7800000 (64-bit, prefetchable) [size=8M]
    Capabilities: [40] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [48] Vital Product Data
        Product Name: KESTREL QDR
        Read-only fields:
            [PN] Part number: MHQH19B-XTR          
            [EC] Engineering changes: A3
            [SN] Serial number: MT1147X07083            
            [V0] Vendor specific: PCIe Gen2 x8    
            [RV] Reserved: checksum good, 0 byte(s) reserved
        Read/write fields:
            [V1] Vendor specific: N/A   
            [YA] Asset tag: N/A                             
            [RW] Read-write area: 109 byte(s) free
        End
    Capabilities: [9c] MSI-X: Enable+ Count=128 Masked-
        Vector table: BAR=0 offset=0007c000
        PBA: BAR=0 offset=0007d000
    Capabilities: [60] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<64ns, L1 unlimited
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
FLReset-
            MaxPayload 256 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #8, Speed 5GT/s, Width x8, ASPM L0s, Exit
Latency L0s unlimited
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 5GT/s (ok), Width x8 (ok)
            TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Alternative Routing-ID Interpretation (ARI)
        ARICap:    MFVC- ACS-, Next Function: 0
        ARICtl:    MFVC- ACS-, Function Group: 0
    Capabilities: [148 v1] Device Serial Number 00-02-c9-03-00-52-3c-0e
    Kernel driver in use: mlx4_core
    Kernel modules: mlx4_core


84:00.0 RAID bus controller [0104]: Adaptec AAC-RAID [9005:0285] (rev 09)
    Subsystem: Adaptec ASR5805 [9005:02b6]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 1
    Region 0: Memory at f8c00000 (64-bit, non-prefetchable) [size=2M]
    Expansion ROM at f8b80000 [disabled] [size=512K]
    Capabilities: [98] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [a0] MSI: Enable- Count=1/2 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [d0] Express (v1) Endpoint, MSI 00
        DevCap:    MaxPayload 512 bytes, PhantFunc 0, Latency L0s
unlimited, L1 <1us
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 256 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Exit
Latency L0s <128ns
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (ok), Width x8 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    Capabilities: [90] Vital Product Data
        Not readable
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
ECRCChkCap+ ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Kernel driver in use: aacraid
    Kernel modules: aacraid


85:00.0 Fibre Channel [0c04]: Emulex Corporation LPe12000 Series 8Gb Fibre
Channel Adapter [10df:f100] (rev 03)
    Subsystem: Emulex Corporation Saturn-X: LightPulse Fibre Channel
Host Adapter [10df:f100]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 16
    NUMA node: 1
    Region 0: Memory at f8fba000 (64-bit, non-prefetchable) [size=4K]
    Region 2: Memory at f8fbc000 (64-bit, non-prefetchable) [size=16K]
    Region 4: I/O ports at e800 [size=256]
    Expansion ROM at f8fc0000 [disabled] [size=256K]
    Capabilities: [58] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable- Count=1/16 Maskable+ 64bit+
        Address: 0000000000000000  Data: 0000
        Masking: 00000000  Pending: 00000000
    Capabilities: [78] MSI-X: Enable+ Count=32 Masked-
        Vector table: BAR=2 offset=00002000
        PBA: BAR=2 offset=00003000
    Capabilities: [84] Vital Product Data
        Product Name: LPe12002, 8GB/S, 2-PORT, FC, PCI EXPRESS HBA,
DIAG, OPTICS
        Read-only fields:
            [PN] Part number: LPE12002-M8
            [SN] Serial number: FC14925990
            [V0] Vendor specific: FC14925990
            [V1] Vendor specific: Emulex LPe12002-M8 8Gb 2-port
PCIe Fibre Channel Adapter
            [V2] Vendor specific: LPe12002-M8
            [V3] Vendor specific:
T2:78,T3:79,7A,7B,7D,7E,7F,T7:73,TB:73,TFF:78
            [V4] Vendor specific: 0
            [RV] Reserved: checksum bad, 22 byte(s) reserved
        End
    Capabilities: [94] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 2048 bytes, PhantFunc 0, Latency L0s
<1us, L1 unlimited
            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 256 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x8, ASPM L0s, Exit
Latency L0s <4us
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x8 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance-
SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
ECRCChkCap+ ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [12c v1] Power Budgeting <?>
    Kernel driver in use: lpfc
    Kernel modules: lpfc


85:00.1 Fibre Channel [0c04]: Emulex Corporation LPe12000 Series 8Gb Fibre
Channel Adapter [10df:f100] (rev 03)
    Subsystem: Emulex Corporation Saturn-X: LightPulse Fibre Channel
Host Adapter [10df:f100]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin B routed to IRQ 17
    NUMA node: 1
    Region 0: Memory at f8f3a000 (64-bit, non-prefetchable) [size=4K]
    Region 2: Memory at f8f3c000 (64-bit, non-prefetchable) [size=16K]
    Region 4: I/O ports at e400 [size=256]
    Expansion ROM at f8f40000 [disabled] [size=256K]
    Capabilities: [58] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable- Count=1/16 Maskable+ 64bit+
        Address: 0000000000000000  Data: 0000
        Masking: 00000000  Pending: 00000000
    Capabilities: [78] MSI-X: Enable+ Count=32 Masked-
        Vector table: BAR=2 offset=00002000
        PBA: BAR=2 offset=00003000
    Capabilities: [84] Vital Product Data
        Product Name: LPe12002, 8GB/S, 2-PORT, FC, PCI EXPRESS HBA,
DIAG, OPTICS
        Read-only fields:
            [PN] Part number: LPE12002-M8
            [SN] Serial number: FC14925990
            [V0] Vendor specific: FC14925990
            [V1] Vendor specific: Emulex LPe12002-M8 8Gb 2-port
PCIe Fibre Channel Adapter
            [V2] Vendor specific: LPe12002-M8
            [V3] Vendor specific:
T2:78,T3:79,7A,7B,7D,7E,7F,T7:73,TB:73,TFF:78
            [V4] Vendor specific: 1
            [RV] Reserved: checksum bad, 22 byte(s) reserved
        End
    Capabilities: [94] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 2048 bytes, PhantFunc 0, Latency L0s
<1us, L1 unlimited
            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 0.000W
        DevCtl:    CorrErr- NonFatalErr- FatalErr- UnsupReq-
            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 256 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr-
TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x8, ASPM L0s, Exit
Latency L0s <4us
            ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s (downgraded), Width x8 (ok)
            TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
NROPrPrP- LTR-
             10BitTagComp- 10BitTagReq- OBFF Not Supported,
ExtFmt- EETLPPrefix-
             EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
             FRS- TPHComp- ExtTPHComp-
             AtomicOpsCap: 32bit- 64bit- 128bitCAS-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR-
OBFF Disabled,
             AtomicOpsCtl: ReqEn-
        LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
             EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
             Retimer- 2Retimers- CrosslinkRes: unsupported
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
        AERCap:    First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
ECRCChkCap+ ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 00000000 00000000 00000000 00000000
    Capabilities: [12c v1] Power Budgeting <?>
    Kernel driver in use: lpfc
    Kernel modules: lpfc


fe:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture Generic Non-core Registers [8086:2c70] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture
Generic Non-core Registers [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture System Address Decoder [8086:2d81] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture
System Address Decoder [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0
[8086:2d90] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical
0 [8086:2d91] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 0
[8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port
Link 0 [8086:2d92] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 0
[8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port
Link 1 [8086:2d93] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 1
[8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1
[8086:2d94] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical
1 [8086:2d95] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 1
[8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Registers [8086:2d98] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Registers [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Target Address Decoder [8086:2d99] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Target Address Decoder [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller RAS Registers [8086:2d9a] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller RAS Registers [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Test Registers [8086:2d9c] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Test Registers [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Control [8086:2da0] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Address [8086:2da1] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Address [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Rank [8086:2da2] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Rank [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Thermal Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Control [8086:2da8] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Address [8086:2da9] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Address [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Rank [8086:2daa] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Rank [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Thermal Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Control [8086:2db0] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Address [8086:2db1] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Address [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Rank [8086:2db2] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Rank [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


fe:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Thermal Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture Generic Non-core Registers [8086:2c70] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture
Generic Non-core Registers [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture System Address Decoder [8086:2d81] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture
System Address Decoder [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0
[8086:2d90] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical
0 [8086:2d91] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 0
[8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port
Link 0 [8086:2d92] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 0
[8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port
Link 1 [8086:2d93] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 1
[8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1
[8086:2d94] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical
1 [8086:2d95] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 1
[8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Registers [8086:2d98] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Registers [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Target Address Decoder [8086:2d99] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Target Address Decoder [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller RAS Registers [8086:2d9a] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller RAS Registers [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Test Registers [8086:2d9c] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Test Registers [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Control [8086:2da0] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Address [8086:2da1] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Address [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Rank [8086:2da2] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Rank [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 0 Thermal Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Control [8086:2da8] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Address [8086:2da9] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Address [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Rank [8086:2daa] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Rank [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 1 Thermal Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Control [8086:2db0] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Address [8086:2db1] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Address [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Rank [8086:2db2] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Rank [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0


ff:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02)
    Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory
Controller Channel 2 Thermal Control [8086:8086]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0



** USB devices:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard
and Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Distributor ID:    Devuan
Description:    Devuan GNU/Linux 4 (chimaera)
Release:    4
Codename:    chimaera
Architecture: x86_64


Kernel: Linux 5.10.0-11-amd64 (SMP w/12 CPU threads)
Kernel taint flags: TAINT_FIRMWARE_WORKAROUND
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8),
LANGUAGE=en_GB:en
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
LSM: AppArmor: enabled

Versions of packages linux-image-5.10.0-11-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.140
ii  kmod                                    28-1
ii  linux-base                              4.6


Versions of packages linux-image-5.10.0-11-amd64 recommends:
ii  apparmor             2.13.6-10
ii  firmware-linux-free  20200122-1


Versions of packages linux-image-5.10.0-11-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.04-20
pn  linux-doc-5.10          <none>


Versions of packages linux-image-5.10.0-11-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>


-- no debconf information
[ 6.525212] Adaptec aacraid driver 1.2.1[50983]-custom
[    6.530560] aacraid 0000:84:00.0: can't disable ASPM; OS doesn't have ASPM control
[    6.538504] aacraid: Comm Interface enabled
[    6.539130] scsi host1: pata_jmicron
[    6.546932] scsi host2: pata_jmicron
[    6.550625] ata1: PATA max UDMA/100 cmd 0xd400 ctl 0xdc00 bmdma 0xd480 irq 16
[    6.557823] ata2: PATA max UDMA/100 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 16
[    6.570653] ACPI: bus type USB registered
[    6.574751] usbcore: registered new interface driver usbfs
[    6.580308] usbcore: registered new interface driver hub
[    6.582390] firewire_ohci 0000:06:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    6.585697] usbcore: registered new device driver usb
[    6.601874] igb: Intel(R) Gigabit Ethernet Network Driver
[    6.607335] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.613784] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    6.620498] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    6.628753] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[    6.637940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.646318] ehci-pci: EHCI PCI platform driver
[    6.651214] uhci_hcd: USB Universal Host Controller Interface driver
[    6.651337] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    6.662963] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    6.671133] ehci-pci 0000:00:1a.7: debug port 1
[    6.679627] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[    6.686617] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbeda000
[    6.706443] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    6.712748] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    6.721090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.728390] usb usb1: Product: EHCI Host Controller
[    6.733329] usb usb1: Manufacturer: Linux 5.10.0-11-amd64 ehci_hcd
[    6.739569] usb usb1: SerialNumber: 0000:00:1a.7
[    6.744499] scsi host3: ahci
[    6.746885] AAC0: kernel 5.2-0[18252] Nov 22 2010
[    6.747600] hub 1-0:1.0: USB hub found
[    6.752260] AAC0: monitor 5.2-0[18252]
[    6.752263] AAC0: bios 5.2-0[18252]
[    6.756096] hub 1-0:1.0: 6 ports detected
[    6.759908] AAC0: serial 2D0611E69DA
[    6.763485] scsi host4: ahci
[    6.767539] AAC0: Non-DASD support enabled.
[    6.767542] AAC0: 64bit support enabled.
[    6.771408] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    6.774140] aacraid 0000:84:00.0: 64 Bit DAC enabled
[    6.778390] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    6.791513] scsi host0: aacraid
[    6.792731] uhci_hcd 0000:00:1a.0: detected 2 ports
[    6.800710] scsi 0:0:0:0: Direct-Access     Adaptec  ROOT             V1.0 PQ: 0 ANSI: 2
[    6.802365] tsc: Refined TSC clocksource calibration: 2666.761 MHz
[    6.802694] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x267097056f1, max_idle_ns: 440795291489 ns
[    6.832940] clocksource: Switched to clocksource tsc
[    6.832965] scsi host5: ahci
[    6.840919] random: fast init done
...
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
[   36.107674] scsi 0:3:1:0: Enclosure         ADAPTEC  Virtual SGPIO  1 0001 PQ: 0 ANSI: 5
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for suspend/resume device
done.
Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root file system device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  UUID=b2a4b397-1c2c-4f9f-8f2c-06e7db328a0c does not exist.  Dropping to a shell!



BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) [   65.163347] ses 0:3:0:0: Attached Enclosure device
[   65.168240] ses 0:3:1:0: Attached Enclosure device
[   65.215668] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[   65.221384] ses 0:3:0:0: Attached scsi generic sg1 type 13
[   65.227084] ses 0:3:1:0: Attached scsi generic sg2 type 13
[   65.227216] sd 0:0:0:0: [sda] 975153152 512-byte logical blocks: (499 GB/465 GiB)
[   65.240256] sd 0:0:0:0: [sda] Write Protect is off
[   65.245147] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   65.310353]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[   65.330542] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   65.469563] ata4: SATA link down (SStatus 0 SControl 300)
[   65.789599] ata5: SATA link down (SStatus 0 SControl 300)
[   66.109825] ata6: SATA link down (SStatus 0 SControl 300)
[   66.429838] ata7: SATA link down (SStatus 0 SControl 300)
[   66.749821] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   66.760943] ata8.00: ATAPI: TEAC    DV-W28S-V, 1.0A, max UDMA/100
[   66.772859] ata8.00: configured for UDMA/100
[   66.782398] scsi 8:0:0:0: CD-ROM            TEAC     DV-W28S-V        1.0A PQ: 0 ANSI: 5
[   66.820588] scsi 8:0:0:0: Attached scsi generic sg3 type 5
[   66.857354] sr 8:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   66.866116] cdrom: Uniform CD-ROM driver Revision: 3.20


...
(initramfs) exit
Begin: Will now check root file system ... fsck from util-linux 2.36.1
[/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
/dev/sda1: clean, 40277/1525920 files, 463661/6103296 blocks
done.
[  192.728216] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[  192.858983] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
INIT: version 2.96 booting
[  193.090831] random: crng init done
[  193.094299] random: 2 urandom warning(s) missed due to ratelimiting
Using makefile-style concurrent boot in runlevel S.
Starting hot-plug events dispatcher: udevd[  193.739513] udevd[722]: starting version 3.2.9
[  193.870933] udevd[723]: starting eudev-3.2.9
.
Synthesizing the initial hotplug events (subsystems)...done.
Synthesizing the initial hotplug events (devices)...done.
Waiting for /dev to be fully populated...[  194.041886] ioatdma: Intel(R) QuickData Technology Driver 5.00
[  194.042237] EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:fe:03.0 (INTERRUPT)
[  194.058349] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:fe:03.0 (POLLED)
[  194.069399] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
[  194.079925] EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[  194.090912] EDAC i7core: Driver loaded, 2 memory controller(s) found.
[  194.111034] igb 0000:01:00.0: DCA enabled
[  194.115136] igb 0000:01:00.1: DCA enabled
[  194.228177] ioatdma 0000:80:16.0: APICID_TAG_MAP set incorrectly by BIOS, disabling DCA
[  194.346851] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[  194.370486] ACPI: Power Button [PWRB]
[  194.374306] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[  194.381896] ACPI: Power Button [PWRF]
[  194.476075] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[  194.486764] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  194.494753] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[  194.502395] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[  194.508810] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[  194.514346] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[  194.520605] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[  194.526759] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[  194.549170] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[  194.557757] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[  194.566555] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[  194.575181] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[  194.583564] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[  194.592770] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[  194.602273] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[  194.611404] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[  194.620545] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[  194.695038] iTCO_vendor_support: vendor-support=0
[  194.787591] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[  194.793309] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[  194.834961] input: PC Speaker as /devices/platform/pcspkr/input/input16
[  194.852054] mgag200 0000:06:04.0: vgaarb: deactivate vga console
[  194.860797] Console: switching to colour dummy device 80x25
[  194.866711] IPMI message handler: version 39.2
[  194.872887] [drm] Initialized mgag200 1.0.0 20110418 for 0000:06:04.0 on minor 0
[  194.882268] fbcon: mgag200drmfb (fb0) is primary device
[  195.233292] ipmi device interface
[  195.249088] ipmi_si: IPMI System Interface driver
[  195.249103] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[  195.249106] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[  195.249107] ipmi_si: Adding SMBIOS-specified kcs state machine
[  195.249186] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[  195.297988] Console: switching to colour frame buffer device 128x48
[  195.393684] mgag200 0000:06:04.0: [drm] fb0: mgag200drmfb frame buffer device
[  195.581017] ipmi_si dmi-ipmi-si.0: IPMI message handler: Found new BMC (man_id: 0x00b980, prod_id: 0xaabb, dev_id: 0x20)
[  195.714383] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
done.
Starting boot logger: bootlogd
Setting up keyboard layout...done.
Activating swap...[  196.990459] Adding 999420k swap on /dev/sda6.  Priority:-2 extents:1 across:999420k FS
done.
[  197.028353] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Checking file systems.../dev/sda8: clean, 15/28155904 files, 2048195/112610304 blocks
/dev/sda7: clean, 13/122160 files, 17305/487936 blocks
/dev/sda5: clean, 2104/610800 files, 104749/2441216 blocks
done.
Cleaning up temporary files....
Loading kernel module firewire-sbp2.
[  197.458940] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[  197.470008] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  197.470579] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[  197.488242] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[  197.507940] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Mounting local filesystems...done.
Activating swapfile swap, if any...done.
Cleaning up temporary files... /tmp.
Starting Setting kernel variables: sysctl.
Configuring network interfaces...done.
Cleaning up temporary files....
Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
Starting: AppArmorLoading AppArmor profiles...
[  197.952446] audit: type=1400 audit(1644923889.920:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1402 comm="apparmor_parser"
done.
[  197.970268] audit: type=1400 audit(1644923889.924:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1401 comm="apparmor_parser"
[  197.970271] audit: type=1400 audit(1644923889.924:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1401 comm="apparmor_parser"
.
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Setting up console font and keymap...done.
Starting enhanced syslogd: rsyslogd.
Starting periodic command scheduler: cron.
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd.
Starting session management daemon: elogind.


Devuan GNU/Linux 4 NEWmanage ttyS2

newmanage login:
[ 0.000000] Linux version 5.10.0-11-amd64 (debian-kernel@???) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.92-1 (2022-01-18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-11-amd64 root=UUID=b2a4b397-1c2c-4f9f-8f2c-06e7db328a0c ro console=tty0 console=ttyS2,115200
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000094000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf75ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf76e000-0x00000000bf76ffff] type 9
[    0.000000] BIOS-e820: [mem 0x00000000bf770000-0x00000000bf77dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf77e000-0x00000000bf7cffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf7ec000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Bull SAS bullx/X8DAH, BIOS 2.0a     09/03/10  
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2667.003 MHz processor
[    0.006904] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.006907] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.006914] last_pfn = 0x640000 max_arch_pfn = 0x400000000
[    0.006918] MTRR default type: uncachable
[    0.006919] MTRR fixed ranges enabled:
[    0.006920]   00000-9FFFF write-back
[    0.006921]   A0000-DFFFF uncachable
[    0.006922]   E0000-E7FFF write-through
[    0.006923]   E8000-FFFFF write-protect
[    0.006924] MTRR variable ranges enabled:
[    0.006926]   0 base 0000000000 mask FC00000000 write-back
[    0.006927]   1 base 0400000000 mask FE00000000 write-back
[    0.006928]   2 base 0600000000 mask FFC0000000 write-back
[    0.006929]   3 base 00C0000000 mask FFC0000000 uncachable
[    0.006930]   4 base 00BF800000 mask FFFF800000 uncachable
[    0.006931]   5 disabled
[    0.006932]   6 disabled
[    0.006932]   7 disabled
[    0.006933]   8 disabled
[    0.006934]   9 disabled
[    0.008767] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.009381] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[    0.009390] last_pfn = 0xbf760 max_arch_pfn = 0x400000000
[    0.019140] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[    0.023531] Using GB pages for direct mapping
[    0.023823] RAMDISK: [mem 0x34a6f000-0x3652efff]
[    0.023827] ACPI: Early table checksum verification disabled
[    0.023832] ACPI: RSDP 0x00000000000FB190 000024 (v02 ACPIAM)
[    0.023837] ACPI: XSDT 0x00000000BF770100 00008C (v01 SMCI            20100903 MSFT 00000097)
[    0.023844] ACPI: FACP 0x00000000BF770290 0000F4 (v04 090310 FACP2317 20100903 MSFT 00000097)
[    0.023850] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20200925/tbfadt-564)
[    0.023855] ACPI: DSDT 0x00000000BF7706F0 0078B8 (v02 10100  10100000 00000000 INTL 20051117)
[    0.023860] ACPI: FACS 0x00000000BF77E000 000040
[    0.023863] ACPI: FACS 0x00000000BF77E000 000040
[    0.023867] ACPI: APIC 0x00000000BF770390 000112 (v02 090310 APIC2317 20100903 MSFT 00000097)
[    0.023871] ACPI: MCFG 0x00000000BF7704B0 00003C (v01 090310 OEMMCFG  20100903 MSFT 00000097)
[    0.023876] ACPI: SLIT 0x00000000BF7704F0 000030 (v01 090310 OEMSLIT  20100903 MSFT 00000097)
[    0.023880] ACPI: SPMI 0x00000000BF770520 000041 (v05 090310 OEMSPMI  20100903 MSFT 00000097)
[    0.023884] ACPI: OEMB 0x00000000BF77E040 000099 (v01 090310 OEMB2317 20100903 MSFT 00000097)
[    0.023888] ACPI: SRAT 0x00000000BF77A6F0 000190 (v02 090310 OEMSRAT  00000001 INTL 00000001)
[    0.023892] ACPI: HPET 0x00000000BF77A880 000038 (v01 090310 OEMHPET  20100903 MSFT 00000097)
[    0.023896] ACPI: SSDT 0x00000000BF7812C0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20051117)
[    0.023900] ACPI: EINJ 0x00000000BF77A8C0 000130 (v01 AMIER  AMI_EINJ 20100903 MSFT 00000097)
[    0.023904] ACPI: BERT 0x00000000BF77AA50 000030 (v01 AMIER  AMI_BERT 20100903 MSFT 00000097)
[    0.023909] ACPI: ERST 0x00000000BF77AA80 0001B0 (v01 AMIER  AMI_ERST 20100903 MSFT 00000097)
[    0.023913] ACPI: HEST 0x00000000BF77AC30 0000A8 (v01 AMIER  ABC_HEST 20100903 MSFT 00000097)
[    0.023916] ACPI: Reserving FACP table memory at [mem 0xbf770290-0xbf770383]
[    0.023918] ACPI: Reserving DSDT table memory at [mem 0xbf7706f0-0xbf777fa7]
[    0.023919] ACPI: Reserving FACS table memory at [mem 0xbf77e000-0xbf77e03f]
[    0.023920] ACPI: Reserving FACS table memory at [mem 0xbf77e000-0xbf77e03f]
[    0.023922] ACPI: Reserving APIC table memory at [mem 0xbf770390-0xbf7704a1]
[    0.023923] ACPI: Reserving MCFG table memory at [mem 0xbf7704b0-0xbf7704eb]
[    0.023924] ACPI: Reserving SLIT table memory at [mem 0xbf7704f0-0xbf77051f]
[    0.023925] ACPI: Reserving SPMI table memory at [mem 0xbf770520-0xbf770560]
[    0.023927] ACPI: Reserving OEMB table memory at [mem 0xbf77e040-0xbf77e0d8]
[    0.023928] ACPI: Reserving SRAT table memory at [mem 0xbf77a6f0-0xbf77a87f]
[    0.023930] ACPI: Reserving HPET table memory at [mem 0xbf77a880-0xbf77a8b7]
[    0.023931] ACPI: Reserving SSDT table memory at [mem 0xbf7812c0-0xbf781622]
[    0.023933] ACPI: Reserving EINJ table memory at [mem 0xbf77a8c0-0xbf77a9ef]
[    0.023934] ACPI: Reserving BERT table memory at [mem 0xbf77aa50-0xbf77aa7f]
[    0.023936] ACPI: Reserving ERST table memory at [mem 0xbf77aa80-0xbf77ac2f]
[    0.023937] ACPI: Reserving HEST table memory at [mem 0xbf77ac30-0xbf77acd7]
[    0.023949] ACPI: Local APIC address 0xfee00000
[    0.023974] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.023975] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.023977] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[    0.023978] SRAT: PXM 0 -> APIC 0x10 -> Node 0
[    0.023979] SRAT: PXM 0 -> APIC 0x12 -> Node 0
[    0.023980] SRAT: PXM 0 -> APIC 0x14 -> Node 0
[    0.023982] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[    0.023983] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[    0.023984] SRAT: PXM 1 -> APIC 0x24 -> Node 1
[    0.023985] SRAT: PXM 1 -> APIC 0x30 -> Node 1
[    0.023986] SRAT: PXM 1 -> APIC 0x32 -> Node 1
[    0.023987] SRAT: PXM 1 -> APIC 0x34 -> Node 1
[    0.023991] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.023993] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.023994] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x33fffffff]
[    0.023996] ACPI: SRAT: Node 1 PXM 1 [mem 0x340000000-0x63fffffff]
[    0.024003] NUMA: Initialized distance table, cnt=2
[    0.024006] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.024008] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x33fffffff] -> [mem 0x00000000-0x33fffffff]
[    0.024020] NODE_DATA(0) allocated [mem 0x33ffd6000-0x33fffffff]
[    0.024041] NODE_DATA(1) allocated [mem 0x63ffd5000-0x63fffefff]
[    0.024450] Zone ranges:
[    0.024452]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.024454]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.024456]   Normal   [mem 0x0000000100000000-0x000000063fffffff]
[    0.024458]   Device   empty
[    0.024459] Movable zone start for each node
[    0.024463] Early memory node ranges
[    0.024464]   node   0: [mem 0x0000000000001000-0x0000000000093fff]
[    0.024466]   node   0: [mem 0x0000000000100000-0x00000000bf75ffff]
[    0.024468]   node   0: [mem 0x0000000100000000-0x000000033fffffff]
[    0.024470]   node   1: [mem 0x0000000340000000-0x000000063fffffff]
[    0.024475] Initmem setup node 0 [mem 0x0000000000001000-0x000000033fffffff]
[    0.024477] On node 0 totalpages: 3143411
[    0.024478]   DMA zone: 64 pages used for memmap
[    0.024479]   DMA zone: 22 pages reserved
[    0.024480]   DMA zone: 3987 pages, LIFO batch:0
[    0.024481]   DMA32 zone: 12190 pages used for memmap
[    0.024482]   DMA32 zone: 780128 pages, LIFO batch:63
[    0.024483]   Normal zone: 36864 pages used for memmap
[    0.024483]   Normal zone: 2359296 pages, LIFO batch:63
[    0.024485] Initmem setup node 1 [mem 0x0000000340000000-0x000000063fffffff]
[    0.024486] On node 1 totalpages: 3145728
[    0.024487]   Normal zone: 49152 pages used for memmap
[    0.024488]   Normal zone: 3145728 pages, LIFO batch:63
[    0.024494] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.024545] On node 0, zone DMA: 108 pages in unavailable ranges
[    0.033658] On node 0, zone Normal: 2208 pages in unavailable ranges
[    0.034319] ACPI: PM-Timer IO Port: 0x808
[    0.034323] ACPI: Local APIC address 0xfee00000
[    0.034333] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.034344] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.034347] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.034350] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.034352] ACPI: IRQ0 used by override.
[    0.034353] ACPI: IRQ9 used by override.
[    0.034356] Using ACPI (MADT) for SMP configuration information
[    0.034358] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.034366] smpboot: Allowing 24 CPUs, 12 hotplug CPUs
[    0.034388] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.034391] PM: hibernation: Registered nosave memory: [mem 0x00094000-0x0009ffff]
[    0.034392] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.034393] PM: hibernation: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.034396] PM: hibernation: Registered nosave memory: [mem 0xbf760000-0xbf76dfff]
[    0.034397] PM: hibernation: Registered nosave memory: [mem 0xbf76e000-0xbf76ffff]
[    0.034398] PM: hibernation: Registered nosave memory: [mem 0xbf770000-0xbf77dfff]
[    0.034400] PM: hibernation: Registered nosave memory: [mem 0xbf77e000-0xbf7cffff]
[    0.034401] PM: hibernation: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff]
[    0.034402] PM: hibernation: Registered nosave memory: [mem 0xbf7e0000-0xbf7ebfff]
[    0.034404] PM: hibernation: Registered nosave memory: [mem 0xbf7ec000-0xbfffffff]
[    0.034405] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.034406] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.034407] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfedfffff]
[    0.034408] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.034409] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.034410] PM: hibernation: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.034413] [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.034415] Booting paravirtualized kernel on bare hardware
[    0.034419] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.039205] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:2
[    0.040593] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u262144
[    0.040605] pcpu-alloc: s200536 r8192 d28840 u262144 alloc=1*2097152
[    0.040607] pcpu-alloc: [0] 00 01 02 03 04 05 12 14 [0] 16 18 20 22 -- -- -- -- 
[    0.040617] pcpu-alloc: [1] 06 07 08 09 10 11 13 15 [1] 17 19 21 23 -- -- -- -- 
[    0.040667] Built 2 zonelists, mobility grouping on.  Total pages: 6190847
[    0.040669] Policy zone: Normal
[    0.040671] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-11-amd64 root=UUID=b2a4b397-1c2c-4f9f-8f2c-06e7db328a0c ro console=tty0 console=ttyS2,115200
[    0.040734] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.040735] printk: log_buf_len total cpu_extra contributions: 94208 bytes
[    0.040736] printk: log_buf_len min size: 131072 bytes
[    0.040990] printk: log_buf_len: 262144 bytes
[    0.040991] printk: early log buf free: 119560(91%)
[    0.041281] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.067898] Memory: 3305328K/25156556K available (12295K kernel code, 2545K rwdata, 7568K rodata, 2412K init, 3680K bss, 528628K reserved, 0K cma-reserved)
[    0.067912] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0
[    0.068208] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2
[    0.068229] Kernel/User page tables isolation: enabled
[    0.068262] ftrace: allocating 36444 entries in 143 pages
[    0.083963] ftrace: allocated 143 pages with 5 groups
[    0.084372] rcu: Hierarchical RCU implementation.
[    0.084374] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=24.
[    0.084377]     Rude variant of Tasks RCU enabled.
[    0.084378]     Tracing variant of Tasks RCU enabled.
[    0.084379] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.084381] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
[    0.089634] NR_IRQS: 524544, nr_irqs: 616, preallocated irqs: 16
[    0.094219] Console: colour VGA+ 80x25
[    0.104425] printk: console [tty0] enabled
[    1.125807] printk: console [ttyS2] enabled
[    1.130081] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    1.141367] ACPI: Core revision 20200925
[    1.145435] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    1.155762] APIC: Switch to symmetric I/O mode setup
[    1.160800] Switched APIC routing to physical flat.
[    1.166223] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    1.191761] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26717b65048, max_idle_ns: 440795334055 ns
[    1.202355] Calibrating delay loop (skipped), value calculated using timer frequency.. 5334.00 BogoMIPS (lpj=10668012)
[    1.206355] pid_max: default: 32768 minimum: 301
[    1.210408] LSM: Security Framework initializing
[    1.214367] Yama: disabled by default; enable with sysctl kernel.yama.*
[    1.218389] AppArmor: AppArmor initialized
[    1.222356] TOMOYO Linux initialized
[    1.235470] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc)
[    1.243119] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, vmalloc)
[    1.246499] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, vmalloc)
[    1.250462] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, vmalloc)
[    1.254792] x86/cpu: VMX (outside TXT) disabled by BIOS
[    1.258372] mce: CPU0: Thermal monitoring enabled (TM1)
[    1.262363] process: using mwait in idle threads
[    1.266357] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    1.270355] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    1.274359] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    1.278356] Spectre V2 : Mitigation: Full generic retpoline
[    1.282355] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    1.286355] Speculative Store Bypass: Vulnerable
[    1.290357] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    1.294478] Freeing SMP alternatives memory: 32K
[    1.414915] smpboot: CPU0: Intel(R) Xeon(R) CPU           X5650  @ 2.67GHz (family: 0x6, model: 0x2c, stepping: 0x2)
[    1.418572] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[    1.422356] core: CPUID marked event: 'bus cycles' unavailable
[    1.426356] ... version:                3
[    1.430355] ... bit width:              48
[    1.434355] ... generic registers:      4
[    1.438355] ... value mask:             0000ffffffffffff
[    1.442355] ... max period:             000000007fffffff
[    1.446354] ... fixed-purpose events:   3
[    1.450354] ... event mask:             000000070000000f
[    1.454479] rcu: Hierarchical SRCU implementation.
[    1.463818] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    1.466714] smp: Bringing up secondary CPUs ...
[    1.470493] x86: Booting SMP configuration:
[    1.474359] .... node  #0, CPUs:        #1  #2  #3  #4  #5
[    1.494358] .... node  #1, CPUs:    #6
[    1.084381] smpboot: CPU 6 Converting physical 0 to logical die 1
[    1.590490]   #7  #8  #9 #10 #11
[    1.604624] smp: Brought up 2 nodes, 12 CPUs
[    1.610357] smpboot: Max logical packages: 4
[    1.614356] smpboot: Total of 12 processors activated (64008.27 BogoMIPS)
[    1.638419] node 0 deferred pages initialised in 16ms
[    1.648587] node 1 deferred pages initialised in 24ms
[    1.654597] devtmpfs: initialized
[    1.657780] x86/mm: Memory block size: 128MB
[    1.660423] PM: Registering ACPI NVS region [mem 0xbf77e000-0xbf7cffff] (335872 bytes)
[    1.662427] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    1.666460] futex hash table entries: 8192 (order: 7, 524288 bytes, vmalloc)
[    1.670480] pinctrl core: initialized pinctrl subsystem
[    1.674643] NET: Registered protocol family 16
[    1.678447] audit: initializing netlink subsys (disabled)
[    1.682367] audit: type=2000 audit(1644923691.512:1): state=initialized audit_enabled=0 res=1
[    1.682480] thermal_sys: Registered thermal governor 'fair_share'
[    1.686359] thermal_sys: Registered thermal governor 'bang_bang'
[    1.690355] thermal_sys: Registered thermal governor 'step_wise'
[    1.694355] thermal_sys: Registered thermal governor 'user_space'
[    1.698355] thermal_sys: Registered thermal governor 'power_allocator'
[    1.702378] cpuidle: using governor ladder
[    1.710387] cpuidle: using governor menu
[    1.714397] ACPI: bus type PCI registered
[    1.718357] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.722459] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    1.726358] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    1.730364] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    1.734892] PCI: Using configuration type 1 for base access
[    1.738870] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    1.743225] Kprobes globally optimized
[    1.746394] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    1.750357] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.954749] ACPI: Added _OSI(Module Device)
[    1.958360] ACPI: Added _OSI(Processor Device)
[    1.962359] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.966355] ACPI: Added _OSI(Processor Aggregator Device)
[    1.970355] ACPI: Added _OSI(Linux-Dell-Video)
[    1.978355] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    1.982355] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    1.993085] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    1.999751] ACPI: Dynamic OEM Table Load:
[    2.002366] ACPI: SSDT 0xFFFF974AF3DA8000 002A00 (v01 DpgPmm P001Ist  00000011 INTL 20051117)
[    2.015157] ACPI: Dynamic OEM Table Load:
[    2.018359] ACPI: SSDT 0xFFFF9745C20CD800 0007DD (v01 PmRef  P001Cst  00003001 INTL 20051117)
[    2.027285] ACPI: Interpreter enabled
[    2.030373] ACPI: (supports S0 S1 S4 S5)
[    2.034355] ACPI: Using IOAPIC for interrupt routing
[    2.038427] HEST: Table parsing has been initialized.
[    2.046357] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.054634] ACPI: Enabled 12 GPEs in block 00 to 3F
[    2.069318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
[    2.074361] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    2.086360] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    2.090491] acpi PNP0A08:00: host bridge window expanded to [io  0x0000-0xdfff]; [io  0x0000-0xdfff window] ignored
[    2.102358] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000ce800-0x000d4fff])
[    2.114556] PCI host bridge to bus 0000:00
[    2.118357] pci_bus 0000:00: root bus resource [io  0x0000-0xdfff]
[    2.126355] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    2.134355] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    2.138358] pci_bus 0000:00: root bus resource [io  0x03b0-0x03bb window]
[    2.146355] pci_bus 0000:00: root bus resource [io  0x03c0-0x03df window]
[    2.154355] pci_bus 0000:00: root bus resource [io  0xf000-0xffff window]
[    2.158355] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    2.166355] pci_bus 0000:00: root bus resource [mem 0xf9000000-0xfbffffff window]
[    2.174356] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    2.182359] pci_bus 0000:00: root bus resource [bus 00-7f]
[    2.186385] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
[    2.194382] pci 0000:00:00.0: enabling Extended Tags
[    2.198394] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    2.206461] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[    2.210380] pci 0000:00:01.0: enabling Extended Tags
[    2.214393] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    2.222472] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[    2.230383] pci 0000:00:03.0: enabling Extended Tags
[    2.234393] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    2.238470] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[    2.246377] pci 0000:00:07.0: enabling Extended Tags
[    2.250392] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    2.258471] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
[    2.262377] pci 0000:00:09.0: enabling Extended Tags
[    2.266390] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    2.274465] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[    2.282482] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
[    2.286367] pci 0000:00:16.0: reg 0x10: [mem 0xfbef8000-0xfbefbfff 64bit]
[    2.294491] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
[    2.298367] pci 0000:00:16.1: reg 0x10: [mem 0xfbef4000-0xfbef7fff 64bit]
[    2.306482] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
[    2.314367] pci 0000:00:16.2: reg 0x10: [mem 0xfbef0000-0xfbef3fff 64bit]
[    2.318483] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
[    2.326369] pci 0000:00:16.3: reg 0x10: [mem 0xfbeec000-0xfbeeffff 64bit]
[    2.334483] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
[    2.338367] pci 0000:00:16.4: reg 0x10: [mem 0xfbee8000-0xfbeebfff 64bit]
[    2.346483] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
[    2.354367] pci 0000:00:16.5: reg 0x10: [mem 0xfbee4000-0xfbee7fff 64bit]
[    2.358482] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
[    2.366367] pci 0000:00:16.6: reg 0x10: [mem 0xfbee0000-0xfbee3fff 64bit]
[    2.374482] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
[    2.378367] pci 0000:00:16.7: reg 0x10: [mem 0xfbedc000-0xfbedffff 64bit]
[    2.386485] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    2.394392] pci 0000:00:1a.0: reg 0x20: [io  0x9c00-0x9c1f]
[    2.398482] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[    2.402392] pci 0000:00:1a.1: reg 0x20: [io  0x9880-0x989f]
[    2.410480] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[    2.414392] pci 0000:00:1a.2: reg 0x20: [io  0x9800-0x981f]
[    2.422487] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    2.426370] pci 0000:00:1a.7: reg 0x10: [mem 0xfbeda000-0xfbeda3ff]
[    2.434432] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    2.442456] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[    2.446370] pci 0000:00:1b.0: reg 0x10: [mem 0xfbed4000-0xfbed7fff 64bit]
[    2.454427] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    2.458450] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    2.466431] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    2.470470] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    2.478392] pci 0000:00:1d.0: reg 0x20: [io  0x9480-0x949f]
[    2.482479] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    2.490392] pci 0000:00:1d.1: reg 0x20: [io  0x9400-0x941f]
[    2.494481] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    2.502392] pci 0000:00:1d.2: reg 0x20: [io  0x9080-0x909f]
[    2.510461] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    2.514372] pci 0000:00:1d.7: reg 0x10: [mem 0xfbed8000-0xfbed83ff]
[    2.522433] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    2.526453] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    2.534496] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[    2.538429] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with PCI Bus 0000:00 [io  0x03e0-0x0cf7 window]
[    2.554358] pci 0000:00:1f.0: can't claim BAR 14 [io  0x0500-0x053f]: address conflict with PCI Bus 0000:00 [io  0x03e0-0x0cf7 window]
[    2.566357] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 03e8 (mask 000f)
[    2.570356] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 00ff)
[    2.578356] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1640 (mask 000f)
[    2.586356] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f)
[    2.594360] pci 0000:00:1f.0: quirk_ich7_lpc+0x0/0xc0 took 54687 usecs
[    2.602472] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[    2.610366] pci 0000:00:1f.2: reg 0x10: [io  0x8480-0x8487]
[    2.614361] pci 0000:00:1f.2: reg 0x14: [io  0x9000-0x9003]
[    2.618360] pci 0000:00:1f.2: reg 0x18: [io  0x8c00-0x8c07]
[    2.626361] pci 0000:00:1f.2: reg 0x1c: [io  0x8880-0x8883]
[    2.630361] pci 0000:00:1f.2: reg 0x20: [io  0x8800-0x881f]
[    2.638361] pci 0000:00:1f.2: reg 0x24: [mem 0xfbed2000-0xfbed27ff]
[    2.642393] pci 0000:00:1f.2: PME# supported from D3hot
[    2.650449] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    2.654370] pci 0000:00:1f.3: reg 0x10: [mem 0xfbed0000-0xfbed00ff 64bit]
[    2.662372] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    2.666501] pci 0000:01:00.0: [8086:10c9] type 00 class 0x020000
[    2.674369] pci 0000:01:00.0: reg 0x10: [mem 0xfbbe0000-0xfbbfffff]
[    2.678362] pci 0000:01:00.0: reg 0x14: [mem 0xfbbc0000-0xfbbdffff]
[    2.686362] pci 0000:01:00.0: reg 0x18: [io  0xbc00-0xbc1f]
[    2.690362] pci 0000:01:00.0: reg 0x1c: [mem 0xfbb9c000-0xfbb9ffff]
[    2.698376] pci 0000:01:00.0: reg 0x30: [mem 0xfbba0000-0xfbbbffff pref]
[    2.706419] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    2.710384] pci 0000:01:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[    2.718357] pci 0000:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
[    2.726370] pci 0000:01:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
[    2.734356] pci 0000:01:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs)
[    2.746479] pci 0000:01:00.1: [8086:10c9] type 00 class 0x020000
[    2.750369] pci 0000:01:00.1: reg 0x10: [mem 0xfbb60000-0xfbb7ffff]
[    2.758362] pci 0000:01:00.1: reg 0x14: [mem 0xfbb40000-0xfbb5ffff]
[    2.762362] pci 0000:01:00.1: reg 0x18: [io  0xb880-0xb89f]
[    2.770362] pci 0000:01:00.1: reg 0x1c: [mem 0xfbb1c000-0xfbb1ffff]
[    2.774375] pci 0000:01:00.1: reg 0x30: [mem 0xfbb20000-0xfbb3ffff pref]
[    2.782416] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[    2.790380] pci 0000:01:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[    2.794356] pci 0000:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
[    2.806370] pci 0000:01:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
[    2.814356] pci 0000:01:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs)
[    2.834379] pci 0000:00:01.0: PCI bridge to [bus 01]
[    2.838358] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    2.842357] pci 0000:00:01.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    2.850406] pci 0000:02:00.0: [10df:f100] type 00 class 0x0c0400
[    2.858369] pci 0000:02:00.0: reg 0x10: [mem 0xfbcba000-0xfbcbafff 64bit]
[    2.866364] pci 0000:02:00.0: reg 0x18: [mem 0xfbcbc000-0xfbcbffff 64bit]
[    2.870361] pci 0000:02:00.0: reg 0x20: [io  0xc800-0xc8ff]
[    2.878366] pci 0000:02:00.0: reg 0x30: [mem 0xfbcc0000-0xfbcfffff pref]
[    2.886360] pci 0000:02:00.0: enabling Extended Tags
[    2.890422] pci 0000:02:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:03.0 (capable of 32.000 Gb/s with 5.0 GT/s PCIe x8 link)
[    2.906404] pci 0000:02:00.1: [10df:f100] type 00 class 0x0c0400
[    2.910370] pci 0000:02:00.1: reg 0x10: [mem 0xfbc3a000-0xfbc3afff 64bit]
[    2.918364] pci 0000:02:00.1: reg 0x18: [mem 0xfbc3c000-0xfbc3ffff 64bit]
[    2.926361] pci 0000:02:00.1: reg 0x20: [io  0xc400-0xc4ff]
[    2.930366] pci 0000:02:00.1: reg 0x30: [mem 0xfbc40000-0xfbc7ffff pref]
[    2.938360] pci 0000:02:00.1: enabling Extended Tags
[    2.954376] pci 0000:00:03.0: PCI bridge to [bus 02]
[    2.958358] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    2.962356] pci 0000:00:03.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    2.970389] pci 0000:00:07.0: PCI bridge to [bus 03]
[    2.974391] pci 0000:00:09.0: PCI bridge to [bus 04]
[    2.982426] pci 0000:05:00.0: [197b:2368] type 00 class 0x010185
[    2.986377] pci 0000:05:00.0: reg 0x10: [io  0xd400-0xd407]
[    2.994481] pci 0000:05:00.0: reg 0x14: [io  0xdc00-0xdc03]
[    2.998367] pci 0000:05:00.0: reg 0x18: [io  0xd880-0xd887]
[    3.002367] pci 0000:05:00.0: reg 0x1c: [io  0xd800-0xd803]
[    3.010367] pci 0000:05:00.0: reg 0x20: [io  0xd480-0xd48f]
[    3.014378] pci 0000:05:00.0: reg 0x30: [mem 0xfbdf0000-0xfbdfffff pref]
[    3.022494] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    3.034366] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    3.038357] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    3.042357] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    3.050374] pci_bus 0000:06: extended config space not accessible
[    3.058382] pci 0000:06:04.0: [102b:0532] type 00 class 0x030000
[    3.062369] pci 0000:06:04.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref]
[    3.070363] pci 0000:06:04.0: reg 0x14: [mem 0xfaffc000-0xfaffffff]
[    3.074362] pci 0000:06:04.0: reg 0x18: [mem 0xfb000000-0xfb7fffff]
[    3.082452] pci 0000:06:05.0: [104c:8023] type 00 class 0x0c0010
[    3.090370] pci 0000:06:05.0: reg 0x10: [mem 0xfaff6000-0xfaff67ff]
[    3.094363] pci 0000:06:05.0: reg 0x14: [mem 0xfaff8000-0xfaffbfff]
[    3.102420] pci 0000:06:05.0: supports D1 D2
[    3.106355] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot
[    3.114419] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[    3.118359] pci 0000:00:1e.0:   bridge window [mem 0xfaf00000-0xfb7fffff]
[    3.126358] pci 0000:00:1e.0:   bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
[    3.134356] pci 0000:00:1e.0:   bridge window [io  0x0000-0xdfff] (subtractive decode)
[    3.142355] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    3.150355] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    3.158355] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03bb window] (subtractive decode)
[    3.166355] pci 0000:00:1e.0:   bridge window [io  0x03c0-0x03df window] (subtractive decode)
[    3.178355] pci 0000:00:1e.0:   bridge window [io  0xf000-0xffff window] (subtractive decode)
[    3.186355] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    3.194355] pci 0000:00:1e.0:   bridge window [mem 0xf9000000-0xfbffffff window] (subtractive decode)
[    3.202355] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    3.214384] pci_bus 0000:00: on NUMA node 0
[    3.215141] ACPI: PCI Root Bridge [BR50] (domain 0000 [bus 80-fb])
[    3.218359] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    3.230358] acpi PNP0A08:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    3.234558] PCI host bridge to bus 0000:80
[    3.238357] pci_bus 0000:80: root bus resource [io  0xe000-0xefff window]
[    3.246355] pci_bus 0000:80: root bus resource [mem 0xf7000000-0xf8ffffff window]
[    3.254355] pci_bus 0000:80: root bus resource [bus 80-fb]
[    3.258373] pci 0000:80:00.0: [8086:3420] type 01 class 0x060400
[    3.266379] pci 0000:80:00.0: enabling Extended Tags
[    3.270399] pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
[    3.278438] pci 0000:80:01.0: [8086:3408] type 01 class 0x060400
[    3.282380] pci 0000:80:01.0: enabling Extended Tags
[    3.286399] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
[    3.294452] pci 0000:80:03.0: [8086:340a] type 01 class 0x060400
[    3.302385] pci 0000:80:03.0: enabling Extended Tags
[    3.306398] pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
[    3.310449] pci 0000:80:05.0: [8086:340c] type 01 class 0x060400
[    3.318385] pci 0000:80:05.0: enabling Extended Tags
[    3.322396] pci 0000:80:05.0: PME# supported from D0 D3hot D3cold
[    3.330447] pci 0000:80:07.0: [8086:340e] type 01 class 0x060400
[    3.334385] pci 0000:80:07.0: enabling Extended Tags
[    3.338398] pci 0000:80:07.0: PME# supported from D0 D3hot D3cold
[    3.346452] pci 0000:80:14.0: [8086:342e] type 00 class 0x080000
[    3.354466] pci 0000:80:14.1: [8086:3422] type 00 class 0x080000
[    3.358463] pci 0000:80:14.2: [8086:3423] type 00 class 0x080000
[    3.366458] pci 0000:80:14.3: [8086:3438] type 00 class 0x080000
[    3.370443] pci 0000:80:16.0: [8086:3430] type 00 class 0x088000
[    3.378369] pci 0000:80:16.0: reg 0x10: [mem 0xf8efc000-0xf8efffff 64bit]
[    3.386474] pci 0000:80:16.1: [8086:3431] type 00 class 0x088000
[    3.390368] pci 0000:80:16.1: reg 0x10: [mem 0xf8ef8000-0xf8efbfff 64bit]
[    3.398472] pci 0000:80:16.2: [8086:3432] type 00 class 0x088000
[    3.406371] pci 0000:80:16.2: reg 0x10: [mem 0xf8ef4000-0xf8ef7fff 64bit]
[    3.410472] pci 0000:80:16.3: [8086:3433] type 00 class 0x088000
[    3.418369] pci 0000:80:16.3: reg 0x10: [mem 0xf8ef0000-0xf8ef3fff 64bit]
[    3.426473] pci 0000:80:16.4: [8086:3429] type 00 class 0x088000
[    3.430368] pci 0000:80:16.4: reg 0x10: [mem 0xf8eec000-0xf8eeffff 64bit]
[    3.438475] pci 0000:80:16.5: [8086:342a] type 00 class 0x088000
[    3.442368] pci 0000:80:16.5: reg 0x10: [mem 0xf8ee8000-0xf8eebfff 64bit]
[    3.450472] pci 0000:80:16.6: [8086:342b] type 00 class 0x088000
[    3.458368] pci 0000:80:16.6: reg 0x10: [mem 0xf8ee4000-0xf8ee7fff 64bit]
[    3.462472] pci 0000:80:16.7: [8086:342c] type 00 class 0x088000
[    3.470369] pci 0000:80:16.7: reg 0x10: [mem 0xf8ee0000-0xf8ee3fff 64bit]
[    3.478497] pci 0000:80:00.0: PCI bridge to [bus 81]
[    3.482403] pci 0000:80:01.0: PCI bridge to [bus 82]
[    3.486669] pci 0000:83:00.0: [15b3:673c] type 00 class 0x0c0600
[    3.494409] pci 0000:83:00.0: reg 0x10: [mem 0xf8a00000-0xf8afffff 64bit]
[    3.498551] pci 0000:83:00.0: reg 0x18: [mem 0xf7800000-0xf7ffffff 64bit pref]
[    3.522456] pci 0000:80:03.0: PCI bridge to [bus 83]
[    3.526359] pci 0000:80:03.0:   bridge window [mem 0xf8a00000-0xf8afffff]
[    3.534358] pci 0000:80:03.0:   bridge window [mem 0xf7800000-0xf7ffffff 64bit pref]
[    3.542407] pci 0000:84:00.0: [9005:0285] type 00 class 0x010400
[    3.546372] pci 0000:84:00.0: reg 0x10: [mem 0xf8c00000-0xf8dfffff 64bit]
[    3.554389] pci 0000:84:00.0: reg 0x30: [mem 0xf8b80000-0xf8bfffff pref]
[    3.562403] pci 0000:84:00.0: supports D1
[    3.578373] pci 0000:80:05.0: PCI bridge to [bus 84]
[    3.582359] pci 0000:80:05.0:   bridge window [mem 0xf8b00000-0xf8dfffff]
[    3.590410] pci 0000:85:00.0: [10df:f100] type 00 class 0x0c0400
[    3.594371] pci 0000:85:00.0: reg 0x10: [mem 0xf8fba000-0xf8fbafff 64bit]
[    3.602365] pci 0000:85:00.0: reg 0x18: [mem 0xf8fbc000-0xf8fbffff 64bit]
[    3.610362] pci 0000:85:00.0: reg 0x20: [io  0xe800-0xe8ff]
[    3.614368] pci 0000:85:00.0: reg 0x30: [mem 0xf8fc0000-0xf8ffffff pref]
[    3.622361] pci 0000:85:00.0: enabling Extended Tags
[    3.626431] pci 0000:85:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:80:07.0 (capable of 32.000 Gb/s with 5.0 GT/s PCIe x8 link)
[    3.642403] pci 0000:85:00.1: [10df:f100] type 00 class 0x0c0400
[    3.650371] pci 0000:85:00.1: reg 0x10: [mem 0xf8f3a000-0xf8f3afff 64bit]
[    3.654365] pci 0000:85:00.1: reg 0x18: [mem 0xf8f3c000-0xf8f3ffff 64bit]
[    3.662362] pci 0000:85:00.1: reg 0x20: [io  0xe400-0xe4ff]
[    3.666368] pci 0000:85:00.1: reg 0x30: [mem 0xf8f40000-0xf8f7ffff pref]
[    3.674360] pci 0000:85:00.1: enabling Extended Tags
[    3.690375] pci 0000:80:07.0: PCI bridge to [bus 85]
[    3.694358] pci 0000:80:07.0:   bridge window [io  0xe000-0xefff]
[    3.702357] pci 0000:80:07.0:   bridge window [mem 0xf8f00000-0xf8ffffff]
[    3.706385] pci_bus 0000:80: on NUMA node 1
[    3.706500] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[    3.714405] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[    3.722404] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[    3.730407] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
[    3.734403] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    3.742404] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[    3.750403] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 *10 11 12 14 15)
[    3.758403] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15)
[    3.766487] iommu: Default domain type: Translated 
[    3.770381] pci 0000:06:04.0: vgaarb: setting as boot VGA device
[    3.774353] pci 0000:06:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    3.786360] pci 0000:06:04.0: vgaarb: bridge control possible
[    3.790355] vgaarb: loaded
[    3.793227] EDAC MC: Ver: 3.0.0
[    3.798528] NetLabel: Initializing
[    3.798528] NetLabel:  domain hash size = 128
[    3.806355] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    3.810380] NetLabel:  unlabeled traffic allowed by default
[    3.814355] PCI: Using ACPI for IRQ routing
[    3.825581] PCI: Discovered peer bus fe
[    3.830355] PCI: root bus fe: using default resources
[    3.830356] PCI: Probing PCI hardware (bus fe)
[    3.830377] PCI host bridge to bus 0000:fe
[    3.834356] pci_bus 0000:fe: Unknown NUMA node; performance will be reduced
[    3.838356] pci_bus 0000:fe: root bus resource [io  0x0000-0xffff]
[    3.846355] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
[    3.854356] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
[    3.862360] pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000
[    3.866399] pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000
[    3.874400] pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000
[    3.882395] pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000
[    3.886398] pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000
[    3.894394] pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000
[    3.898394] pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000
[    3.906398] pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000
[    3.910395] pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000
[    3.918394] pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000
[    3.922394] pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000
[    3.930395] pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000
[    3.934395] pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000
[    3.942380] pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000
[    3.946396] pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000
[    3.954407] pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000
[    3.958397] pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000
[    3.966394] pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000
[    3.970395] pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000
[    3.978394] pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000
[    3.982398] pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000
[    3.990394] pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000
[    3.998395] pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000
[    4.002397] pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000
[    4.010406] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
[    4.014362] PCI: Discovered peer bus ff
[    4.018355] PCI: root bus ff: using default resources
[    4.018356] PCI: Probing PCI hardware (bus ff)
[    4.018376] PCI host bridge to bus 0000:ff
[    4.022355] pci_bus 0000:ff: Unknown NUMA node; performance will be reduced
[    4.030355] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[    4.038355] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
[    4.042356] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[    4.050359] pci 0000:ff:00.0: [8086:2c70] type 00 class 0x060000
[    4.058392] pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000
[    4.062397] pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000
[    4.070393] pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000
[    4.074392] pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000
[    4.082392] pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000
[    4.086392] pci 0000:ff:02.4: [8086:2d94] type 00 class 0x060000
[    4.094400] pci 0000:ff:02.5: [8086:2d95] type 00 class 0x060000
[    4.102393] pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000
[    4.106393] pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000
[    4.114392] pci 0000:ff:03.2: [8086:2d9a] type 00 class 0x060000
[    4.118392] pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000
[    4.126393] pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000
[    4.130395] pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000
[    4.138392] pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000
[    4.142395] pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000
[    4.150395] pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000
[    4.158392] pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000
[    4.162392] pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000
[    4.170394] pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000
[    4.174394] pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000
[    4.182392] pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000
[    4.186393] pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000
[    4.194394] pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000
[    4.198401] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[    4.206361] PCI: pci_cache_line_size set to 64 bytes
[    4.206403] pci 0000:00:1f.3: can't claim BAR 4 [io  0x0400-0x041f]: address conflict with PCI Bus 0000:00 [io  0x03e0-0x0cf7 window]
[    4.218490] e820: reserve RAM buffer [mem 0x00094000-0x0009ffff]
[    4.218491] e820: reserve RAM buffer [mem 0xbf760000-0xbfffffff]
[    4.218523] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    4.222356] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    4.231401] clocksource: Switched to clocksource tsc-early
[    4.248989] VFS: Disk quotas dquot_6.6.0
[    4.253005] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.260095] AppArmor: AppArmor Filesystem Enabled
[    4.264877] pnp: PnP ACPI init
[    4.268109] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    4.274790] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    4.274883] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    4.275079] pnp 00:02: [dma 0 disabled]
[    4.275129] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.275311] pnp 00:03: [dma 0 disabled]
[    4.275381] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.275617] pnp 00:04: [dma 0 disabled]
[    4.275664] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.275788] system 00:05: [io  0x164e-0x164f] has been reserved
[    4.281772] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.281910] pnp 00:06: disabling [mem 0x00000400-0x000004ff] because it overlaps 0000:01:00.0 BAR 7 [mem 0x00000000-0x0001ffff 64bit]
[    4.293987] pnp 00:06: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:01:00.0 BAR 10 [mem 0x00000000-0x0001ffff 64bit]
[    4.306927] pnp 00:06: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:01:00.1 BAR 7 [mem 0x00000000-0x0001ffff 64bit]
[    4.319774] pnp 00:06: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:01:00.1 BAR 10 [mem 0x00000000-0x0001ffff 64bit]
[    4.332790] system 00:06: [io  0x0ca2-0x0ca3] could not be reserved
[    4.339120] system 00:06: [io  0x0cf8-0x0cff] could not be reserved
[    4.345444] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    4.351424] system 00:06: [io  0x0800-0x087f] has been reserved
[    4.357402] system 00:06: [io  0x0500-0x057f] has been reserved
[    4.363384] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    4.370057] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    4.376729] system 00:06: [mem 0xfed40000-0xfed8ffff] could not be reserved
[    4.383754] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.383922] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    4.391951] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    4.398632] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.398816] system 00:08: [io  0x0a00-0x0a0f] has been reserved
[    4.404801] system 00:08: [io  0x0a10-0x0a1f] has been reserved
[    4.410779] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.410894] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    4.417579] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.417731] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[    4.424759] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[    4.431776] system 00:0a: [mem 0xfed90000-0xffffffff] could not be reserved
[    4.438802] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    4.438885] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    4.439012] pnp: PnP ACPI: found 12 devices
[    4.449384] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.458417] NET: Registered protocol family 2
[    4.463248] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
[    4.473535] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, vmalloc)
[    4.482836] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
[    4.491616] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
[    4.499290] TCP: Hash tables configured (established 262144 bind 65536)
[    4.506140] UDP hash table entries: 16384 (order: 7, 524288 bytes, vmalloc)
[    4.513343] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, vmalloc)
[    4.520972] NET: Registered protocol family 1
[    4.525400] NET: Registered protocol family 44
[    4.529921] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
[    4.535649] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    4.542666] pci 0000:00:1f.0: BAR 14: [io  size 0x0040] has bogus alignment
[    4.549693] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfa000000-0xfa1fffff 64bit pref]
[    4.557598] pci 0000:00:1f.3: BAR 4: assigned [io  0x1000-0x101f]
[    4.563757] pci 0000:01:00.0: BAR 7: no space for [mem size 0x00020000 64bit]
[    4.570954] pci 0000:01:00.0: BAR 7: failed to assign [mem size 0x00020000 64bit]
[    4.578509] pci 0000:01:00.0: BAR 10: no space for [mem size 0x00020000 64bit]
[    4.585804] pci 0000:01:00.0: BAR 10: failed to assign [mem size 0x00020000 64bit]
[    4.593447] pci 0000:01:00.1: BAR 7: no space for [mem size 0x00020000 64bit]
[    4.600643] pci 0000:01:00.1: BAR 7: failed to assign [mem size 0x00020000 64bit]
[    4.608198] pci 0000:01:00.1: BAR 10: no space for [mem size 0x00020000 64bit]
[    4.615494] pci 0000:01:00.1: BAR 10: failed to assign [mem size 0x00020000 64bit]
[    4.623137] pci 0000:00:01.0: PCI bridge to [bus 01]
[    4.629438] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    4.635597] pci 0000:00:01.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    4.643510] pci 0000:00:03.0: PCI bridge to [bus 02]
[    4.648536] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    4.654692] pci 0000:00:03.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    4.661544] pci 0000:00:07.0: PCI bridge to [bus 03]
[    4.666577] pci 0000:00:09.0: PCI bridge to [bus 04]
[    4.671605] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    4.676633] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    4.682791] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    4.689636] pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfa1fffff 64bit pref]
[    4.697454] pci 0000:00:1e.0: PCI bridge to [bus 06]
[    4.702477] pci 0000:00:1e.0:   bridge window [mem 0xfaf00000-0xfb7fffff]
[    4.709324] pci 0000:00:1e.0:   bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
[    4.717141] pci_bus 0000:00: No. 2 try to assign unassigned res
[    4.723119] release child resource [mem 0xfbb1c000-0xfbb1ffff]
[    4.723120] release child resource [mem 0xfbb20000-0xfbb3ffff pref]
[    4.723121] release child resource [mem 0xfbb40000-0xfbb5ffff]
[    4.723122] release child resource [mem 0xfbb60000-0xfbb7ffff]
[    4.723123] release child resource [mem 0xfbb9c000-0xfbb9ffff]
[    4.723123] release child resource [mem 0xfbba0000-0xfbbbffff pref]
[    4.723124] release child resource [mem 0xfbbc0000-0xfbbdffff]
[    4.723125] release child resource [mem 0xfbbe0000-0xfbbfffff]
[    4.723127] pci 0000:00:01.0: resource 14 [mem 0xfbb00000-0xfbbfffff] released
[    4.730423] pci 0000:00:01.0: PCI bridge to [bus 01]
[    4.735456] pci 0000:00:01.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01] add_size 100000 add_align 100000
[    4.746058] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    4.753077] pci 0000:00:1f.0: BAR 14: [io  size 0x0040] has bogus alignment
[    4.760101] pci 0000:00:01.0: BAR 14: assigned [mem 0xfa200000-0xfa3fffff]
[    4.767035] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa200000-0xfa21ffff]
[    4.773888] pci 0000:01:00.0: BAR 1: assigned [mem 0xfa220000-0xfa23ffff]
[    4.780733] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa240000-0xfa25ffff pref]
[    4.788028] pci 0000:01:00.1: BAR 0: assigned [mem 0xfa260000-0xfa27ffff]
[    4.794878] pci 0000:01:00.1: BAR 1: assigned [mem 0xfa280000-0xfa29ffff]
[    4.801723] pci 0000:01:00.1: BAR 6: assigned [mem 0xfa2a0000-0xfa2bffff pref]
[    4.809015] pci 0000:01:00.0: BAR 3: assigned [mem 0xfa2c0000-0xfa2c3fff]
[    4.815867] pci 0000:01:00.0: BAR 7: assigned [mem 0xfa2c4000-0xfa2e3fff 64bit]
[    4.823250] pci 0000:01:00.0: BAR 10: assigned [mem 0xfa2e4000-0xfa303fff 64bit]
[    4.830717] pci 0000:01:00.1: BAR 3: assigned [mem 0xfa304000-0xfa307fff]
[    4.837567] pci 0000:01:00.1: BAR 7: assigned [mem 0xfa308000-0xfa327fff 64bit]
[    4.844947] pci 0000:01:00.1: BAR 10: assigned [mem 0xfa328000-0xfa347fff 64bit]
[    4.852418] pci 0000:00:01.0: PCI bridge to [bus 01]
[    4.857442] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    4.863598] pci 0000:00:01.0:   bridge window [mem 0xfa200000-0xfa3fffff]
[    4.870448] pci 0000:00:03.0: PCI bridge to [bus 02]
[    4.875474] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    4.881631] pci 0000:00:03.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    4.888479] pci 0000:00:07.0: PCI bridge to [bus 03]
[    4.893506] pci 0000:00:09.0: PCI bridge to [bus 04]
[    4.899565] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    4.904593] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    4.910749] pci 0000:00:1c.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    4.917596] pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfa1fffff 64bit pref]
[    4.925414] pci 0000:00:1e.0: PCI bridge to [bus 06]
[    4.930436] pci 0000:00:1e.0:   bridge window [mem 0xfaf00000-0xfb7fffff]
[    4.937285] pci 0000:00:1e.0:   bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
[    4.945103] pci_bus 0000:00: resource 4 [io  0x0000-0xdfff]
[    4.950732] pci_bus 0000:00: resource 5 [io  0x0000-0x03af window]
[    4.956973] pci_bus 0000:00: resource 6 [io  0x03e0-0x0cf7 window]
[    4.963211] pci_bus 0000:00: resource 7 [io  0x03b0-0x03bb window]
[    4.969450] pci_bus 0000:00: resource 8 [io  0x03c0-0x03df window]
[    4.975692] pci_bus 0000:00: resource 9 [io  0xf000-0xffff window]
[    4.981930] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
[    4.988953] pci_bus 0000:00: resource 11 [mem 0xf9000000-0xfbffffff window]
[    4.995973] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[    5.002383] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    5.008014] pci_bus 0000:01: resource 1 [mem 0xfa200000-0xfa3fffff]
[    5.014342] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    5.019973] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    5.026301] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    5.031932] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    5.038260] pci_bus 0000:05: resource 2 [mem 0xfa000000-0xfa1fffff 64bit pref]
[    5.045553] pci_bus 0000:06: resource 1 [mem 0xfaf00000-0xfb7fffff]
[    5.051883] pci_bus 0000:06: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref]
[    5.059177] pci_bus 0000:06: resource 4 [io  0x0000-0xdfff]
[    5.064812] pci_bus 0000:06: resource 5 [io  0x0000-0x03af window]
[    5.071051] pci_bus 0000:06: resource 6 [io  0x03e0-0x0cf7 window]
[    5.077293] pci_bus 0000:06: resource 7 [io  0x03b0-0x03bb window]
[    5.083531] pci_bus 0000:06: resource 8 [io  0x03c0-0x03df window]
[    5.089770] pci_bus 0000:06: resource 9 [io  0xf000-0xffff window]
[    5.096009] pci_bus 0000:06: resource 10 [mem 0x000a0000-0x000bffff window]
[    5.103032] pci_bus 0000:06: resource 11 [mem 0xf9000000-0xfbffffff window]
[    5.110050] pci_bus 0000:06: resource 12 [mem 0xfed40000-0xfed44fff]
[    5.116515] pci 0000:80:00.0: PCI bridge to [bus 81]
[    5.121546] pci 0000:80:01.0: PCI bridge to [bus 82]
[    5.126580] pci 0000:80:03.0: PCI bridge to [bus 83]
[    5.131609] pci 0000:80:03.0:   bridge window [mem 0xf8a00000-0xf8afffff]
[    5.138458] pci 0000:80:03.0:   bridge window [mem 0xf7800000-0xf7ffffff 64bit pref]
[    5.146276] pci 0000:80:05.0: PCI bridge to [bus 84]
[    5.151300] pci 0000:80:05.0:   bridge window [mem 0xf8b00000-0xf8dfffff]
[    5.159184] pci 0000:80:07.0: PCI bridge to [bus 85]
[    5.164210] pci 0000:80:07.0:   bridge window [io  0xe000-0xefff]
[    5.170366] pci 0000:80:07.0:   bridge window [mem 0xf8f00000-0xf8ffffff]
[    5.177217] pci_bus 0000:80: resource 4 [io  0xe000-0xefff window]
[    5.183460] pci_bus 0000:80: resource 5 [mem 0xf7000000-0xf8ffffff window]
[    5.190394] pci_bus 0000:83: resource 1 [mem 0xf8a00000-0xf8afffff]
[    5.196718] pci_bus 0000:83: resource 2 [mem 0xf7800000-0xf7ffffff 64bit pref]
[    5.204013] pci_bus 0000:84: resource 1 [mem 0xf8b00000-0xf8dfffff]
[    5.210343] pci_bus 0000:85: resource 0 [io  0xe000-0xefff]
[    5.215974] pci_bus 0000:85: resource 1 [mem 0xf8f00000-0xf8ffffff]
[    5.222311] pci_bus 0000:fe: resource 4 [io  0x0000-0xffff]
[    5.227940] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
[    5.234446] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    5.240084] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
[    5.248365] pci 0000:06:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    5.256934] PCI: CLS 256 bytes, default 64
[    5.261150] Trying to unpack rootfs image as initramfs...
[    5.751631] Freeing initrd memory: 27392K
[    5.755715] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    5.762217] software IO TLB: mapped [mem 0x00000000bb760000-0x00000000bf760000] (64MB)
[    5.771085] Initialise system trusted keyrings
[    5.775762] Key type blacklist registered
[    5.779932] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    5.787666] zbud: loaded
[    5.790487] integrity: Platform Keyring initialized
[    5.795430] Key type asymmetric registered
[    5.799587] Asymmetric key parser 'x509' registered
[    5.804535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    5.812048] io scheduler mq-deadline registered
[    5.818204] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.824990] intel_idle: MWAIT substates: 0x1120
[    5.825076] Monitor-Mwait will be used to enter C-3 state
[    5.825085] Monitor-Mwait will be used to enter C-3 state
[    5.825091] ACPI: \_PR_.P001: Found 3 idle states
[    5.829953] ACPI: \_PR_.P002: Found 3 idle states
[    5.834812] ACPI: \_PR_.P003: Found 3 idle states
[    5.839663] ACPI: \_PR_.P004: Found 3 idle states
[    5.844516] ACPI: \_PR_.P005: Found 3 idle states
[    5.849362] ACPI: \_PR_.P006: Found 3 idle states
[    5.854230] ACPI: \_PR_.P007: Found 3 idle states
[    5.859097] ACPI: \_PR_.P008: Found 3 idle states
[    5.863964] ACPI: \_PR_.P009: Found 3 idle states
[    5.868840] ACPI: \_PR_.P010: Found 3 idle states
[    5.873710] ACPI: \_PR_.P011: Found 3 idle states
[    5.878579] ACPI: \_PR_.P012: Found 3 idle states
[    5.883346] intel_idle: ACPI _CST not found or not usable
[    5.883347] intel_idle: v0.5.1 model 0x2C
[    5.884159] intel_idle: Local APIC timer is reliable in all C-states
[    5.884811] ERST: Failed to get Error Log Address Range.
[    5.890210] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
[    5.899563] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[    5.906033] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.912499] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    5.920342] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    5.928148] 00:04: ttyS2 at I/O 0x3e8 (irq = 5, base_baud = 115200) is a 16550A
[    5.936230] Linux agpgart interface v0.103
[    5.940476] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    5.950923] i8042: PNP: No PS/2 controller found.
[    5.955692] i8042: Probing ports directly.
[    5.962777] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.967809] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.973284] mousedev: PS/2 mouse device common for all mice
[    5.978968] rtc_cmos 00:01: RTC can wake from S4
[    5.983871] rtc_cmos 00:01: registered as rtc0
[    5.988475] rtc_cmos 00:01: setting system clock to 2022-02-15T11:14:57 UTC (1644923697)
[    5.996664] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    6.004403] intel_pstate: CPU model not supported
[    6.009837] ledtrig-cpu: registered to indicate activity on CPUs
[    6.016385] NET: Registered protocol family 10
[    6.030043] Segment Routing with IPv6
[    6.034235] mip6: Mobile IPv6
[    6.037264] NET: Registered protocol family 17
[    6.041935] mpls_gso: MPLS GSO support
[    6.047897] microcode: sig=0x206c2, pf=0x1, revision=0x10
[    6.053855] microcode: Microcode Update Driver: v2.2.
[    6.053860] IPI shorthand broadcast: enabled
[    6.063342] sched_clock: Marking stable (4982952996, 1080381010)->(6243983674, -180649668)
[    6.073365] registered taskstats version 1
[    6.077551] Loading compiled-in X.509 certificates
[    6.127472] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    6.136288] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    6.146645] zswap: loaded using pool lzo/zbud
[    6.152603] Key type ._fscrypt registered
[    6.156698] Key type .fscrypt registered
[    6.160697] Key type fscrypt-provisioning registered
[    6.165781] AppArmor: AppArmor sha1 policy hashing enabled
[    6.171895] APEI: Can not request [mem 0xbf77a9f0-0xbf77aa43] for APEI BERT registers
[    6.181553] Freeing unused kernel image (initmem) memory: 2412K
[    6.206492] Write protecting the kernel read-only data: 22528k
[    6.213379] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    6.220554] Freeing unused kernel image (rodata/data gap) memory: 624K
[    6.287491] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    6.294008] x86/mm: Checking user space page tables
[    6.352620] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    6.359144] Run /init as init process
[    6.362887]   with arguments:
[    6.362887]     /init
[    6.362888]   with environment:
[    6.362889]     HOME=/
[    6.362890]     TERM=linux
[    6.362890]     BOOT_IMAGE=/boot/vmlinuz-5.10.0-11-amd64
[    6.381672] udevd[171]: starting version 3.2.9
[    6.386425] random: udevd: uninitialized urandom read (16 bytes read)
[    6.392980] random: udevd: uninitialized urandom read (16 bytes read)
[    6.400234] udevd[172]: starting eudev-3.2.9
[    6.411826] random: udevd: uninitialized urandom read (16 bytes read)
[    6.427203] pps_core: LinuxPPS API ver. 1 registered
[    6.432250] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@???>
[    6.442051] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20200925/utaddress-204)
[    6.457618] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.467921] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.474884] SCSI subsystem initialized
[    6.479470] PTP clock support registered
[    6.485016] dca service started, version 1.12.1
[    6.492023] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    6.497973] i2c i2c-0: 1/19 memory slots populated (from DMI)
[    6.503786] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD
[    6.514560] mlx4_core: Mellanox ConnectX core driver v4.0-0
[    6.518372] libata version 3.00 loaded.
[    6.520250] mlx4_core: Initializing 0000:83:00.0
[    6.525212] Adaptec aacraid driver 1.2.1[50983]-custom
[    6.530560] aacraid 0000:84:00.0: can't disable ASPM; OS doesn't have ASPM control
[    6.538504] aacraid: Comm Interface enabled
[    6.539130] scsi host1: pata_jmicron
[    6.546932] scsi host2: pata_jmicron
[    6.550625] ata1: PATA max UDMA/100 cmd 0xd400 ctl 0xdc00 bmdma 0xd480 irq 16
[    6.557823] ata2: PATA max UDMA/100 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 16
[    6.570653] ACPI: bus type USB registered
[    6.574751] usbcore: registered new interface driver usbfs
[    6.580308] usbcore: registered new interface driver hub
[    6.582390] firewire_ohci 0000:06:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    6.585697] usbcore: registered new device driver usb
[    6.601874] igb: Intel(R) Gigabit Ethernet Network Driver
[    6.607335] igb: Copyright (c) 2007-2014 Intel Corporation.
[    6.613591] ahci 0000:00:1f.2: version 3.0
[    6.613784] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    6.620498] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    6.628753] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
[    6.637940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.646318] ehci-pci: EHCI PCI platform driver
[    6.651214] uhci_hcd: USB Universal Host Controller Interface driver
[    6.651337] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    6.662963] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    6.671133] ehci-pci 0000:00:1a.7: debug port 1
[    6.679627] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[    6.686617] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbeda000
[    6.706443] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    6.712748] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    6.721090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.728390] usb usb1: Product: EHCI Host Controller
[    6.733329] usb usb1: Manufacturer: Linux 5.10.0-11-amd64 ehci_hcd
[    6.739569] usb usb1: SerialNumber: 0000:00:1a.7
[    6.744499] scsi host3: ahci
[    6.746885] AAC0: kernel 5.2-0[18252] Nov 22 2010
[    6.747600] hub 1-0:1.0: USB hub found
[    6.752260] AAC0: monitor 5.2-0[18252]
[    6.752263] AAC0: bios 5.2-0[18252]
[    6.756096] hub 1-0:1.0: 6 ports detected
[    6.759908] AAC0: serial 2D0611E69DA
[    6.763485] scsi host4: ahci
[    6.767539] AAC0: Non-DASD support enabled.
[    6.767542] AAC0: 64bit support enabled.
[    6.771408] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    6.774140] aacraid 0000:84:00.0: 64 Bit DAC enabled
[    6.778390] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    6.791513] scsi host0: aacraid
[    6.792731] uhci_hcd 0000:00:1a.0: detected 2 ports
[    6.800710] scsi 0:0:0:0: Direct-Access     Adaptec  ROOT             V1.0 PQ: 0 ANSI: 2
[    6.802365] tsc: Refined TSC clocksource calibration: 2666.761 MHz
[    6.802694] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x267097056f1, max_idle_ns: 440795291489 ns
[    6.832940] clocksource: Switched to clocksource tsc
[    6.832965] scsi host5: ahci
[    6.840919] random: fast init done
[    6.843472] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009c00
[    6.850691] scsi host6: ahci
[    6.853645] igb 0000:01:00.0: added PHC on eth0
[    6.858239] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[    6.865219] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:25:90:6a:6c:5c
[    6.872712] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
[    6.877921] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[    6.885809] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    6.894169] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.901469] usb usb2: Product: UHCI Host Controller
[    6.906410] usb usb2: Manufacturer: Linux 5.10.0-11-amd64 uhci_hcd
[    6.912650] usb usb2: SerialNumber: 0000:00:1a.0
[    6.917353] scsi host7: ahci
[    6.921149] scsi host8: ahci
[    6.924239] ata3: SATA max UDMA/133 abar m2048@0xfbed2000 port 0xfbed2100 irq 42
[    6.931829] ata4: SATA max UDMA/133 abar m2048@0xfbed2000 port 0xfbed2180 irq 42
[    6.939300] ata5: SATA max UDMA/133 abar m2048@0xfbed2000 port 0xfbed2200 irq 42
[    6.946770] ata6: SATA max UDMA/133 abar m2048@0xfbed2000 port 0xfbed2280 irq 42
[    6.954241] ata7: SATA max UDMA/133 abar m2048@0xfbed2000 port 0xfbed2300 irq 42
[    6.961710] ata8: SATA max UDMA/133 abar m2048@0xfbed2000 port 0xfbed2380 irq 42
[    6.969242] hub 2-0:1.0: USB hub found
[    6.975745] hub 2-0:1.0: 2 ports detected
[    6.979934] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    6.983183] scsi 0:3:0:0: Enclosure         ADAPTEC  Virtual SGPIO  0 0001 PQ: 0 ANSI: 5
[    6.985236] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    7.000934] ehci-pci 0000:00:1d.7: debug port 1
[    7.010098] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[    7.017057] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbed8000
[    7.042454] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    7.048338] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    7.056680] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.063980] usb usb3: Product: EHCI Host Controller
[    7.068919] usb usb3: Manufacturer: Linux 5.10.0-11-amd64 ehci_hcd
[    7.075163] usb usb3: SerialNumber: 0000:00:1d.7
[    7.080074] hub 3-0:1.0: USB hub found
[    7.083900] hub 3-0:1.0: 6 ports detected
[    7.084120] Emulex LightPulse Fibre Channel SCSI driver 12.8.0.4
[    7.088157] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    7.094039] Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries.
[    7.111605] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    7.119383] uhci_hcd 0000:00:1a.1: detected 2 ports
[    7.122494] firewire_core 0000:06:05.0: created device fw0: GUID 003048000020d1aa, S400
[    7.124386] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[    7.138240] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    7.146579] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.153872] usb usb4: Product: UHCI Host Controller
[    7.158811] usb usb4: Manufacturer: Linux 5.10.0-11-amd64 uhci_hcd
[    7.165054] usb usb4: SerialNumber: 0000:00:1a.1
[    7.173048] hub 4-0:1.0: USB hub found
[    7.177322] hub 4-0:1.0: 2 ports detected
[    7.181408] igb 0000:01:00.1: added PHC on eth1
[    7.185998] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
[    7.192937] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:25:90:6a:6c:5d
[    7.200212] igb 0000:01:00.1: eth1: PBA No: FFFFFF-0FF
[    7.205412] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[    7.214264] scsi host9: Emulex LPe12000 PCIe Fibre Channel Adapter on PCI bus 02 device 00 irq 16
[    7.281396] ata3: SATA link down (SStatus 0 SControl 300)
[    7.326152] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    7.331464] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    7.338942] uhci_hcd 0000:00:1a.2: detected 2 ports
[    7.343918] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
[    7.349778] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    7.358117] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.365413] usb usb5: Product: UHCI Host Controller
[    7.370352] usb usb5: Manufacturer: Linux 5.10.0-11-amd64 uhci_hcd
[    7.376594] usb usb5: SerialNumber: 0000:00:1a.2
[    7.381520] hub 5-0:1.0: USB hub found
[    7.385348] hub 5-0:1.0: 2 ports detected
[    7.389737] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    7.395039] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    7.402553] uhci_hcd 0000:00:1d.0: detected 2 ports
[    7.407508] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009480
[    7.413366] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    7.421707] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.429003] usb usb6: Product: UHCI Host Controller
[    7.433940] usb usb6: Manufacturer: Linux 5.10.0-11-amd64 uhci_hcd
[    7.440181] usb usb6: SerialNumber: 0000:00:1d.0
[    7.444979] hub 6-0:1.0: USB hub found
[    7.448794] hub 6-0:1.0: 2 ports detected
[    7.453288] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    7.458583] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    7.466063] uhci_hcd 0000:00:1d.1: detected 2 ports
[    7.471016] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[    7.476870] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    7.485210] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.492504] usb usb7: Product: UHCI Host Controller
[    7.497441] usb usb7: Manufacturer: Linux 5.10.0-11-amd64 uhci_hcd
[    7.503683] usb usb7: SerialNumber: 0000:00:1d.1
[    7.508489] hub 7-0:1.0: USB hub found
[    7.512340] hub 7-0:1.0: 2 ports detected
[    7.516830] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    7.522128] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    7.529628] uhci_hcd 0000:00:1d.2: detected 2 ports
[    7.534613] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009080
[    7.540484] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    7.548824] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.556116] usb usb8: Product: UHCI Host Controller
[    7.561058] usb usb8: Manufacturer: Linux 5.10.0-11-amd64 uhci_hcd
[    7.567300] usb usb8: SerialNumber: 0000:00:1d.2
[    7.572124] hub 8-0:1.0: USB hub found
[    7.575952] hub 8-0:1.0: 2 ports detected
[    7.698444] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[    7.896851] usb 5-2: New USB device found, idVendor=046b, idProduct=ff10, bcdDevice= 1.00
[    7.905136] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.912327] usb 5-2: Product: Virtual Keyboard and Mouse
[    7.917698] usb 5-2: Manufacturer: American Megatrends Inc.
[    7.923331] usb 5-2: SerialNumber: serial
[    7.975365] hid: raw HID events driver (C) Jiri Kosina
[    7.992982] usbcore: registered new interface driver usbhid
[    7.998649] usbhid: USB HID core driver
[    8.004805] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:046B:FF10.0001/input/input3
[    8.019160] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-2/input0
[    8.034195] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/0003:046B:FF10.0002/input/input4
[    8.048543] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-2/input1
[    8.860899] mlx4_core 0000:83:00.0: 32.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x8 link)
[    9.074085] <mlx4_ib> mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v4.0-0
[    9.082758] <mlx4_ib> mlx4_ib_add: counter index 0 for port 1 allocated 0
[    9.568097] scsi host10: Emulex LPe12000 PCIe Fibre Channel Adapter on PCI bus 02 device 01 irq 17
[   11.836156] scsi host11: Emulex LPe12000 PCIe Fibre Channel Adapter on PCI bus 85 device 00 irq 16
[   14.104122] scsi host12: Emulex LPe12000 PCIe Fibre Channel Adapter on PCI bus 85 device 01 irq 17
[   36.107674] scsi 0:3:1:0: Enclosure         ADAPTEC  Virtual SGPIO  1 0001 PQ: 0 ANSI: 5
[   65.163347] ses 0:3:0:0: Attached Enclosure device
[   65.168240] ses 0:3:1:0: Attached Enclosure device
[   65.215668] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[   65.221384] ses 0:3:0:0: Attached scsi generic sg1 type 13
[   65.227084] ses 0:3:1:0: Attached scsi generic sg2 type 13
[   65.227216] sd 0:0:0:0: [sda] 975153152 512-byte logical blocks: (499 GB/465 GiB)
[   65.240256] sd 0:0:0:0: [sda] Write Protect is off
[   65.245132] sd 0:0:0:0: [sda] Mode Sense: 12 00 10 08
[   65.245147] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[   65.310353]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[   65.330542] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   65.469563] ata4: SATA link down (SStatus 0 SControl 300)
[   65.789599] ata5: SATA link down (SStatus 0 SControl 300)
[   66.109825] ata6: SATA link down (SStatus 0 SControl 300)
[   66.429838] ata7: SATA link down (SStatus 0 SControl 300)
[   66.749821] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   66.760943] ata8.00: ATAPI: TEAC    DV-W28S-V, 1.0A, max UDMA/100
[   66.772859] ata8.00: configured for UDMA/100
[   66.782398] scsi 8:0:0:0: CD-ROM            TEAC     DV-W28S-V        1.0A PQ: 0 ANSI: 5
[   66.820588] scsi 8:0:0:0: Attached scsi generic sg3 type 5
[   66.857354] sr 8:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   66.866116] cdrom: Uniform CD-ROM driver Revision: 3.20
[   66.934505] sr 8:0:0:0: Attached scsi CD-ROM sr0
[  192.728216] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  192.858983] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[  193.090831] random: crng init done
[  193.094299] random: 2 urandom warning(s) missed due to ratelimiting
[  193.739513] udevd[722]: starting version 3.2.9
[  193.870933] udevd[723]: starting eudev-3.2.9
[  194.041886] ioatdma: Intel(R) QuickData Technology Driver 5.00
[  194.042237] EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:fe:03.0 (INTERRUPT)
[  194.058349] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:fe:03.0 (POLLED)
[  194.069399] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
[  194.079925] EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[  194.090912] EDAC i7core: Driver loaded, 2 memory controller(s) found.
[  194.111034] igb 0000:01:00.0: DCA enabled
[  194.115136] igb 0000:01:00.1: DCA enabled
[  194.228177] ioatdma 0000:80:16.0: APICID_TAG_MAP set incorrectly by BIOS, disabling DCA
[  194.346851] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[  194.370486] ACPI: Power Button [PWRB]
[  194.374306] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[  194.381896] ACPI: Power Button [PWRF]
[  194.476075] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[  194.486764] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  194.494753] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[  194.502395] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[  194.508810] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[  194.514346] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[  194.520605] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[  194.526759] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[  194.549170] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[  194.557757] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[  194.566555] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[  194.575181] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[  194.583564] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[  194.592770] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[  194.602273] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[  194.611404] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[  194.620545] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[  194.695038] iTCO_vendor_support: vendor-support=0
[  194.787591] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[  194.793309] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[  194.834961] input: PC Speaker as /devices/platform/pcspkr/input/input16
[  194.852054] mgag200 0000:06:04.0: vgaarb: deactivate vga console
[  194.860797] Console: switching to colour dummy device 80x25
[  194.866711] IPMI message handler: version 39.2
[  194.872887] [drm] Initialized mgag200 1.0.0 20110418 for 0000:06:04.0 on minor 0
[  194.882268] fbcon: mgag200drmfb (fb0) is primary device
[  195.233292] ipmi device interface
[  195.249088] ipmi_si: IPMI System Interface driver
[  195.249103] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[  195.249106] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[  195.249107] ipmi_si: Adding SMBIOS-specified kcs state machine
[  195.249186] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[  195.297988] Console: switching to colour frame buffer device 128x48
[  195.393684] mgag200 0000:06:04.0: [drm] fb0: mgag200drmfb frame buffer device
[  195.581017] ipmi_si dmi-ipmi-si.0: IPMI message handler: Found new BMC (man_id: 0x00b980, prod_id: 0xaabb, dev_id: 0x20)
[  195.714383] ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
[  196.990459] Adding 999420k swap on /dev/sda6.  Priority:-2 extents:1 across:999420k FS
[  197.028353] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[  197.458940] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[  197.470008] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  197.470579] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[  197.488242] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[  197.507940] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[  197.952446] audit: type=1400 audit(1644923889.920:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1402 comm="apparmor_parser"
[  197.970268] audit: type=1400 audit(1644923889.924:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1401 comm="apparmor_parser"
[  197.970271] audit: type=1400 audit(1644923889.924:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1401 comm="apparmor_parser"