:: Re: [DNG] Chimaera install: only lo…
Pàgina inicial
Delete this message
Reply to this message
Autor: Haines Brown
Data:  
A: Dng
Assumpte: Re: [DNG] Chimaera install: only low resolution video
On Wed, Oct 27, 2021 at 12:24:08PM +0200, Ludovic Bellière wrote:
> Hello Haines,
>
> Your issue isn't about the graphic card, but probably linked to your screen. I
> do not know what a Gigabyte Z590 machine is, and can't look it up at the moment,
> but I would suggest that you'd research compatibility feedbacks for your
> hardware. You'll find something if the machine is being used by members of the
> FOSS community and there are serious issues.


Ludovic, thanks for the feedback. The Z590 chipset is new (March
2021), but I did see that someone had installed linux on it and so
assumed it could be done. I don't see Gigabyte's specification of the
video chip.

The lspci command returns

  VGA compatible controller: Intel ... Device 4c8a (rev 04)
    (prog-if 00 [VGA controller])


> On the other hand, make sure that all firmware and drivers for your hardware are
> installed. To do that, make sure you have enabled the non-free and contrib
> channels in your /etc/apt/sources.list. Then install firmware-linux.


Someone running ubuntu lacked video and had luck by installing the
5.10.0-1019-oem kernel and updating some drivers to testing. But that
was no screen at all, and others don't report the problem.

The non-free and contrib were already specified in my sources.list. I had
not installed firmware-linux but doing so made no diference.

> That's for the firmware, as for the drivers, you'll need
> xserver-xorg-video-all, that should install everything you need and
> then more. You may also need xserver-xorg-video-intel if you GPU is
> intel.


They were both already installed.

You imply it would do me no good to get and install a video card.
That came as a surprise. I had assumed that it was the card is that
made the dpi modes accessible.

> On Tue, 26 Oct 2021, Haines Brown wrote:
>
> > I just installed Chimera RC on a Gigabyte Z590 machine (incidentally
> > it looks like I could autoconfigure wireless with providing firmware).
> > When I installed xorg and fluxobox, the display was low resolution.
> > Apparently it is a low resolution default. lxrandr offers no other
> > accessible resolution.
> >
> > I here paste the return of inxi on my current machine and then on the
> > installation of Chimaera. Neighter machine has a v ideo card. I'm not
> > sure that to make of this.
> >
> > The old machine with good resolution
> >
> >   Graphics:
> >     Device-1: Intel HD Graphics 630 vendor: Gigabyte driver: i915 v: kernel
> >     bus ID: 00:02.0 chip ID: 8086:5912
> >     Display: server: X.Org 1.20.4 driver: loaded: modesetting unloaded: fbdev
> >     failed: vesa resolution: 1920x1080~60Hz s-dpi: 96
> >     OpenGL: renderer: Mesa DRI Intel HD Graphics 630 (Kaby Lake GT2)
> >     v: 4.5 Mesa 18.3.6 compat-v: 3.0 direct render: Yes

> >
> > On new machine with poor revoltuion
> >
> >  Graphics:
> >    Device-l: Intel vendor: Gigabyte driver: N/A bus ID 00:02.0
> >    chip ID: 8886:4c8a
> >    Display: serve: X.Org 1.20.11 drive: loaded: vesa
> >    unloaded: fbdev,modesetting resolution: 1024x768-76Hz s-dpi: 96
> >    OpenGL:  renderer: llvmpipe (LLM 11.0.1 256 b its) v: 4.5 Mesa 20.3.5
> >    compat-w 3.1 direct render: Yes

> >
> > Help intrpreting this would be much appreciated.
> >
> > --
> > Haines Brown




--
Haines Brown