:: [DNG] fresh install of chimaera on …
Page principale
Supprimer ce message
Répondre à ce message
Auteur: Riccardo Mottola
Date:  
À: dng
Nouveaux-sujets: Re: [DNG] fresh install of chimaera on an Ultrabook - no touchpad, [DNG] Rant: was fresh install of chimaera on an Ultrabook - no touchpad
Sujet: [DNG] fresh install of chimaera on an Ultrabook - no touchpad
Hi all,

I "converted" a laptop from Windows 7 to Devuan and as a test, I
installed chimaera. The intel display should have no issues.
Install wasn't too easy due to the system having only WiFi and no
Optical drive - the WiFi needs firmware not included in the install media.
I used an USB stick with the full DVD, installed offline then found the
firmware on debian, copied over with an USB stick and things do work.

Partitioning was also very hard, but more about that in a separate thread.

What is really annoying is that X11 works but I have no touchpad. By
attaching an external mouse the cursor works.

In dmesg I get thousands of messages like this:
[255709.204049] psmouse serio1: bad data from KBC - timeout
[255709.206127] psmouse serio1: bad data from KBC - timeout
[255709.208137] psmouse serio1: bad data from KBC - timeout
[255709.210118] psmouse serio1: bad data from KBC - timeout
[255709.212111] psmouse serio1: bad data from KBC - timeout
[255709.213986] psmouse serio1: bad data from KBC - timeout
[255709.215980] psmouse serio1: bad data from KBC - timeout
[255709.217997] psmouse serio1: bad data from KBC - timeout
[255709.219983] psmouse serio1: bad data from KBC - timeout
[255709.222021] psmouse serio1: bad data from KBC - timeout
[255709.224043] psmouse serio1: bad data from KBC - timeout

I suppose it is related... psmouse! I have no other dmesg data since it
went overflow.

lsusb lists nothing:
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 10f1:1a44 Importek FJ Camera
Bus 001 Device 005: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 003: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138
Card Reader Controller
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 8087:07da Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

The optical mouse is my Trust mouse I attached.

In Xorg I see:
[   121.142] (II) LoadModule: "libinput"
[   121.142] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   121.214] (II) Module libinput: vendor="X.Org Foundation"
[   121.214]    compiled for 1.20.8, module version = 0.30.0
[   121.214]    Module class: X.Org XInput Driver
[   121.214]    ABI class: X.Org XInput driver, version 24.1
[   121.214] (II) Using input driver 'libinput' for 'Power Button'
[   121.214] (**) Power Button: always reports core events
[   121.214] (**) Option "Device" "/dev/input/event4"
[   121.215] (**) Option "_source" "server/udev"
[   121.239] (II) event4  - Power Button: is tagged by udev as: Keyboard
[   121.240] (II) event4  - Power Button: device is a keyboard
[   121.240] (II) event4  - Power Button: device removed
[   121.260] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[   121.260] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[   121.260] (**) Option "xkb_model" "pc105"
[   121.260] (**) Option "xkb_layout" "it"
[   121.281] (II) event4  - Power Button: is tagged by udev as: Keyboard
[   121.281] (II) event4  - Power Button: device is a keyboard
[   121.282] (II) config/udev: Adding input device Fujitsu FUJ02E3
(/dev/input/event5)
[   121.282] (**) Fujitsu FUJ02E3: Applying InputClass "libinput
keyboard catchall"
[   121.282] (II) Using input driver 'libinput' for 'Fujitsu FUJ02E3'
[   121.282] (**) Fujitsu FUJ02E3: always reports core events
[   121.282] (**) Option "Device" "/dev/input/event5"
[   121.282] (**) Option "_source" "server/udev"
[   121.282] (II) event5  - Fujitsu FUJ02E3: is tagged by udev as: Keyboard
[   121.282] (II) event5  - Fujitsu FUJ02E3: device is a keyboard
[   121.282] (II) event5  - Fujitsu FUJ02E3: device removed
[   121.352] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input6/event5"
[   121.352] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3"
(type: KEYBOARD, id 7)
[   121.352] (**) Option "xkb_model" "pc105"
[   121.352] (**) Option "xkb_layout" "it"
[   121.355] (II) event5  - Fujitsu FUJ02E3: is tagged by udev as: Keyboard
[   121.355] (II) event5  - Fujitsu FUJ02E3: device is a keyboard
[   121.357] (II) config/udev: Adding input device Video Bus
(/dev/input/event7)
[   121.357] (**) Video Bus: Applying InputClass "libinput keyboard
catchall"
[   121.357] (II) Using input driver 'libinput' for 'Video Bus'
[   121.357] (**) Video Bus: always reports core events
[   121.357] (**) Option "Device" "/dev/input/event7"
[   121.357] (**) Option "_source" "server/udev"
[   121.359] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[   121.359] (II) event7  - Video Bus: device is a keyboard
[   121.359] (II) event7  - Video Bus: device removed
[   121.408] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event7"
[   121.408] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 8)
[   121.408] (**) Option "xkb_model" "pc105"
[   121.408] (**) Option "xkb_layout" "it"
[   121.411] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[   121.412] (II) event7  - Video Bus: device is a keyboard
[   121.413] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[   121.413] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[   121.413] (II) Using input driver 'libinput' for 'Power Button'
[   121.413] (**) Power Button: always reports core events
[   121.413] (**) Option "Device" "/dev/input/event3"
[   121.413] (**) Option "_source" "server/udev"
[   121.415] (II) event3  - Power Button: is tagged by udev as: Keyboard
[   121.415] (II) event3  - Power Button: device is a keyboard
[   121.415] (II) event3  - Power Button: device removed
[   121.436] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[   121.436] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 9)
[   121.436] (**) Option "xkb_model" "pc105"
[   121.436] (**) Option "xkb_layout" "it"
[   121.439] (II) event3  - Power Button: is tagged by udev as: Keyboard
[   121.439] (II) event3  - Power Button: device is a keyboard
[   121.441] (II) config/udev: Adding input device Lid Switch
(/dev/input/event2)
[   121.441] (II) No input driver specified, ignoring this device.
[   121.441] (II) This device may have been added with another device file.
[   121.442] (II) config/udev: Adding input device FJ Camera: FJ Camera
(/dev/input/event8)
[   121.442] (**) FJ Camera: FJ Camera: Applying InputClass "libinput
keyboard catchall"
[   121.442] (II) Using input driver 'libinput' for 'FJ Camera: FJ Camera'
[   121.442] (**) FJ Camera: FJ Camera: always reports core events
[   121.442] (**) Option "Device" "/dev/input/event8"
[   121.442] (**) Option "_source" "server/udev"
[   121.444] (II) event8  - FJ Camera: FJ Camera: is tagged by udev as:
Keyboard
[   121.445] (II) event8  - FJ Camera: FJ Camera: device is a keyboard
[   121.445] (II) event8  - FJ Camera: FJ Camera: device removed
[   121.504] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9/event8"
[   121.504] (II) XINPUT: Adding extended input device "FJ Camera: FJ
Camera" (type: KEYBOARD, id 10)
[   121.504] (**) Option "xkb_model" "pc105"
[   121.504] (**) Option "xkb_layout" "it"
[   121.508] (II) event8  - FJ Camera: FJ Camera: is tagged by udev as:
Keyboard
[   121.508] (II) event8  - FJ Camera: FJ Camera: device is a keyboard
[   121.509] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event9)
[   121.509] (II) No input driver specified, ignoring this device.
[   121.509] (II) This device may have been added with another device file.
[   121.510] (II) config/udev: Adding input device HDA Intel PCH Front
Headphone (/dev/input/event10)
[   121.510] (II) No input driver specified, ignoring this device.
[   121.510] (II) This device may have been added with another device file.
[   121.511] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event0)
[   121.511] (**) AT Translated Set 2 keyboard: Applying InputClass
"libinput keyboard catchall"
[   121.511] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[   121.511] (**) AT Translated Set 2 keyboard: always reports core events
[   121.511] (**) Option "Device" "/dev/input/event0"
[   121.511] (**) Option "_source" "server/udev"
[   121.513] (II) event0  - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[   121.513] (II) event0  - AT Translated Set 2 keyboard: device is a
keyboard
[   121.514] (II) event0  - AT Translated Set 2 keyboard: device removed
[   121.528] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   121.528] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 11)
[   121.528] (**) Option "xkb_model" "pc105"
[   121.528] (**) Option "xkb_layout" "it"
[   121.531] (II) event0  - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[   121.532] (II) event0  - AT Translated Set 2 keyboard: device is a
keyboard
[   121.534] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/event1)
[   121.534] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"libinput touchpad catchall"
[   121.534] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics
TouchPad'
[   121.534] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   121.534] (**) Option "Device" "/dev/input/event1"
[   121.534] (**) Option "_source" "server/udev"
[   121.536] (II) event1  - SynPS/2 Synaptics TouchPad: is tagged by
udev as: Touchpad
[   121.538] (II) event1  - SynPS/2 Synaptics TouchPad: device is a touchpad
[   121.539] (II) event1  - SynPS/2 Synaptics TouchPad: device removed
[   121.581] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[   121.581] (II) XINPUT: Adding extended input device "SynPS/2
Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   121.584] (**) Option "AccelerationScheme" "none"
[   121.584] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[   121.584] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
factor: 2.000
[   121.584] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
threshold: 4
[   121.586] (II) event1  - SynPS/2 Synaptics TouchPad: is tagged by
udev as: Touchpad
[   121.589] (II) event1  - SynPS/2 Synaptics TouchPad: device is a touchpad
[   121.590] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/mouse0)
[   121.590] (II) No input driver specified, ignoring this device.
[   121.590] (II) This device may have been added with another device file.
[   121.591] (II) config/udev: Adding input device PC Speaker
(/dev/input/event6)
[   121.591] (II) No input driver specified, ignoring this device.
[   121.591] (II) This device may have been added with another device file.
[   121.591] (II) config/udev: Adding input device BRLTTY 6.3 Linux
Screen Driver Keyboard (/dev/input/event12)
[   121.592] (**) BRLTTY 6.3 Linux Screen Driver Keyboard: Applying
InputClass "libinput keyboard catchall"
[   121.592] (II) Using input driver 'libinput' for 'BRLTTY 6.3 Linux
Screen Driver Keyboard'
[   121.592] (**) BRLTTY 6.3 Linux Screen Driver Keyboard: always
reports core events


whch makes me think that at least X11 attempts to use the TouchPad as a
Synaptics touchpad.

[   121.590] (II) No input driver specified, ignoring this device.
[   121.590] (II) This device may have been added with another device file.

but this maks me worry! and this one too:

[   121.539] (II) event1  - SynPS/2 Synaptics TouchPad: device removed


Any suggestions? thanks a lot

Riccardo