:: [devuan-dev] bug#581: marked as don…
Αρχική Σελίδα
Delete this message
Reply to this message
Συντάκτης: Devuan bug Tracking System
Ημερομηνία:  
Προς: Mark Hindley
Αντικείμενο: [devuan-dev] bug#581: marked as done (fhem fails to update from v6.0.24448 to v6.0.24458)
Your message dated Mon, 17 May 2021 20:01:48 +0100
with message-id <YKK9nPHmTN4nu0E7@???>
and subject line Re: bug#581 - Re: fhem fails to update from v6.0.24448 to v6.0.24458
has caused the Devuan bug report #581,
regarding fhem fails to update from v6.0.24448 to v6.0.24458
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@???
immediately.)


--
581: https://bugs.devuan.org/cgi/bugreport.cgi?bug=581
Devuan Bug Tracking System
Contact owner@??? with problems
Package: fhem
Version: 6.0.24458
Severity: grave

Hello!

I tried to dist-upgrade my installation and the package fhem fails after installing the new packe during configuration of fhem and quitts with this message:

- ---// apt-get install fhem //---
Reading package lists... Done
Building dependency tree
Reading state information... Done
fhem is already the newest version (6.0.24458).
0 upgraded, 0 newly installed, 0 to remove and 17 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n]
[master decf234] saving uncommitted changes in /etc prior to apt run
Author: Joerg Schiermeier, Bielefeld <joerg@Pythagoras>
2 files changed, 2 insertions(+), 2 deletions(-)
Setting up fhem (6.0.24458) ...
creating user fhem
useradd: Can't get unique UID (no more available UIDs)
useradd: can't create user
dpkg: error processing package fhem (--configure):
installed fhem package post-installation script subprocess returned error exit status 4
Errors were encountered while processing:
fhem
Customize some settings (e.g. runlevel.conf etc.) - done (0).
E: Sub-process /usr/bin/dpkg returned an error code (1)
- ---//---


dpkg -s fhem tells me this:
- ---// dpkg -s fhem //---
Package: fhem
Status: install ok half-configured
Priority: extra
Section: utils
Maintainer: Rudolf Koenig <r.koenig@???>
Architecture: all
Version: 6.0.24458
Config-Version: 6.0.24448
Depends: perl-base (>= 5.6.2), libdevice-serialport-perl (>= 1.0), libwww-perl (>= 1.0), libio-socket-ssl-perl (>= 1.0), libcgi-pm-perl, libjson-perl, sqlite3, libdbd-sqlite3-perl, libtext-diff-perl
Suggests: libtimedate-perl, libmail-imapclient-perl, libgd-graph-perl, libtext-csv-perl, libxml-simple-perl, liblist-moreutils-perl, fonts-liberation, libimage-librsvg-perl, libgd-text-perl, libsocket6-perl, libio-socket-inet6-perl, libmime-base64-perl, libimage-info-perl, libusb-1.0-0-dev, libarchive-extract-perl, libarchive-zip-perl
Conffiles:
/opt/fhem/fhem.cfg 33c27853aad2a4bdc94d38925539eba1
Description: GPL'd perl server for house automation.
It is used to automate some common tasks in the household like switching lamps
/ shutters / heating / etc. and to log events like temperature/humidity/power
consumption.
Homepage: http://www.fhem.de
- ---//---

At the end apt-get/dpkg leave the package installed but not configured. So I reverted to the last working version.

- --

Kind regards

Joerg Schiermeier
Bielefeld, Germany




- -- System Information:
Distributor ID:    Devuan
Description:    Devuan GNU/Linux 3 (beowulf)
Release:    3
Codename:    beowulf
Architecture: x86_64


Kernel: Linux 5.10.0-0.bpo.5-amd64 (SMP w/16 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=de_DE.utf-8, LC_CTYPE=de_DE.utf-8 (charmap=UTF-8), LANGUAGE=de:en_GB (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: sysvinit (via /sbin/init)
LSM: SELinux: enabled - Mode: Permissive - Policy name: default

Versions of packages fhem depends on:
ii  libcgi-pm-perl             4.40-1
ii  libdbd-sqlite3-perl        1.62-3
ii  libdevice-serialport-perl  1.04-3+b6
ii  libio-socket-ssl-perl      2.060-3
ii  libjson-perl               4.02000-1
ii  libtext-diff-perl          1.45-1
ii  libwww-perl                6.36-2
ii  perl-base                  5.28.1-6+deb10u1
ii  sqlite3                    3.27.2-3+deb10u1


fhem recommends no packages.

Versions of packages fhem suggests:
ii  fonts-liberation            1:1.07.4-9
ii  libarchive-extract-perl     0.80-1
ii  libarchive-zip-perl         1.64-1
ii  libgd-graph-perl            1.54~ds-2
ii  libgd-text-perl             0.86-9
ii  libimage-info-perl          1.41-1
ii  libimage-librsvg-perl       0.07-8+b6
ii  libio-socket-inet6-perl     2.72-2
ii  liblist-moreutils-perl      0.416-1+b4
ii  libmail-imapclient-perl     3.42-1
ii  libsocket6-perl             0.29-1+b1
ii  libtext-csv-perl            1.99-1
ii  libtimedate-perl            2.3000-2+deb10u1
ii  libusb-1.0-0-dev            2:1.0.22-2
ii  libxml-simple-perl          2.25-1
ii  perl [libmime-base64-perl]  5.28.1-6+deb10u1


- -- Configuration Files:
/opt/fhem/fhem.cfg changed:
attr global userattr cmdIcon devStateIcon:textField-long devStateStyle icon sortby webCmd webCmdLabel:textField-long widgetOverride
attr global autoload_undefined_devices 1
attr global logfile ./log/fhem-%Y-%m.log
attr global modpath .
attr global statefile ./log/fhem.save
attr global verbose 3
define WEB FHEMWEB 8083 global
setuuid WEB 60a1a209-f33f-9804-b6c9-244d4a5a2e3983de
define Logfile FileLog ./log/fhem-%Y-%m.log fakelog
setuuid Logfile 60a1a20a-f33f-9804-2097-e62ccc5f5099aae9
define autocreate autocreate
setuuid autocreate 60a1a20a-f33f-9804-158e-9d37c06250f82f6a
attr autocreate filelog ./log/%NAME-%Y.log
define eventTypes eventTypes ./log/eventTypes.txt
setuuid eventTypes 60a1a20a-f33f-9804-53de-0517de36861d2159
define initialUsbCheck notify global:INITIALIZED usb create
setuuid initialUsbCheck 60a1a20a-f33f-9804-ff28-b176a1b34d163091
define allowed allowed
setuuid allowed 60a1a318-f33f-9804-4ea4-99dea8a87e72eae0


- -- no debconf information

On Mon, May 17, 2021 at 08:28:40PM +0200, Joerg Schiermeier wrote:
> Hi Mark,
>
> upps, sorry!
> You are right. So I will send my report directly to the package
> maintainer.


No worries.

Closing.

Mark