:: Re: [DNG] EFI Installation of Beowu…
Kezdőlap
Delete this message
Reply to this message
Szerző: Andreas Messer
Dátum:  
Címzett: Jonathan Moebius
CC: dng
Új témák: Re: [DNG] EFI Installation of Beowulf? [solved]
Tárgy: Re: [DNG] EFI Installation of Beowulf?
Hi Jonathan,

On Mon, Feb 22, 2021 at 11:25:14PM +0100, Jonathan Moebius wrote:
> I have switched to a new computer and tried to install Beowulf 3.1.0 in a
> pure-EFI setting.
> I have tried installing on a SATA SSD as well as a a m.2 PCIe SSD. Originally,


I can confirm, that I'm running similar setups with beowulf and pure EFI
boot here. So basically this should be working.

> the plan was a dual boot install with Win10 being installed first, however
> after several failed attempts, I scraped Win10 and went for a Linux-only
> install.


What does "failed attempts" mean here? Did Windows fail to install or
boot? I believe that if Win 10 does not install, then there is probably a
problem in your EFI Bios. Maybe older OS versions don't use some new EFI
feature which is broken on your hardware?

> Installation seems to run smoothly but after reboot grub presents itself
> without the "graphical" selection menu but instead delivers the line
> "Minimal BASH-like line editing is supported..."


That typically happens when grub does not find its config file. You could
check if the bootloader has been installed successfully:

root@zeus:/home/andi# efibootmgr -v
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001,000B,0002,0008,0003,0004,0005
Boot0001* debian        HD(1,GPT,c00640c3-e748-405b-8139-eeea224542dd,0x800,0x32000)/File(\EFI\DEBIAN\SHIMX64.EFI)
...


root@zeus:/home/andi# lsblk -o name,partuuid,mountpoint
NAME                      PARTUUID                             MOUNTPOINT
nvme0n1
├─nvme0n1p1               c00640c3-e748-405b-8139-eeea224542dd /boot/efi
└─nvme0n1p2               b94969ac-596c-460b-9fca-aa911bad2d8c /
....


Did you check that you're using GPT partition table? EFI boot wont work
reliably without that.


> EFI Partition may be missing or too small


My EFI partition is 100M ( 6M used )

> Grub.cfg may be missing
> I compared the grub.cfg from Debian and Devuan. Superficially they look very
> similar.


Depending on if you use a separate /boot partition, some paths/uuid might
be different.

How did you chroot into your installation? Did you bind mound
/dev, /sys, /proc and related filesystems? Also /boot (if needed) and efi
need to be mounted to get grub properly installed.

Andreas
--
gnuPG keyid: 8C2BAF51
fingerprint: 28EE 8438 E688 D992 3661 C753 90B3 BAAA 8C2B AF51