:: Re: [DNG] Synaptics Touchpad Fn+F9
Forside
Slet denne besked
Besvar denne besked
Skribent: Florian Zieboll
Dato:  
Til: dng
Emne: Re: [DNG] Synaptics Touchpad Fn+F9
Am 4. Februar 2021 20:13:49 MEZ schrieb g4sra <g4sra@???>:
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Thursday, February 4, 2021 6:59 PM, Florian Zieboll via Dng <dng@???> wrote:
>
> Thanks for the reply Florian
>
> > Am 4. Februar 2021 18:15:06 MEZ schrieb g4sra via Dng dng@???:
> >
> > > Does anyone know how to re-enable a Synaptics Touchpad in Linux after it has been turned off in Windows using Fn+F9 ?
> >
> > If this key combo really changed something "in hardware", i assume that a "hard reset" of the notebook(?!) should solve the issue...
> >
> > Usually, this is accomplished by removing all power sources and periphery, and then holding down the power button for 15-20 seconds. The idea is to remove any stored electricity (from ac adapter, battery, capacitors) to clear all non-persistent storage.
>
> That is what googling said too, unfortunately it didn't work.
>
> >
> > Your devices miles may vary, the manual should mention it.
>
> The manual is not much use at all, being digital it won't even serve purpose in the WC.
> >
> > libre grüße,
> > Florian
> >
>
> By first installing Windows 7 and then the Synaptic drivers on an old HDD I was able to restore touchpad functionality with the Fn+F9 switching. This is a programmable multi-gesture touchpad which I guess may have flash memory.
>
> There has got to be a better way....



Hallo g4sra,

as you replied off-list and I don't know of any better way, I bring the issue back to the list: Perhaps someone has a hint on resetting the device, if you'd reveal its make and model?

Another idea out of thin air: Did you remove the CMOS battery - or does the notebook provide a button (or pins) to reset the bios password?

libre Grüße,
Florian


--

ooops...

[message sent otg]