:: Re: [DNG] [SOLVED] XFCE in Beowulf …
Página superior
Eliminar este mensaje
Responder a este mensaje
Autor: kernel panic!
Fecha:  
A: dng
Asunto: Re: [DNG] [SOLVED] XFCE in Beowulf confuses left and right
Update!!

Edit (the) Settings on my Taskbar.
Edit Lock Taskbar (was enabled)
"Drag & Drop" my Taskbar on primary...

Done!

*Big Thanks for your help & patience & attention*

Michael

Am 05.11.20 um 12:03 schrieb kernel panic!:
> dear terry
> hello all,
>
> Am 03.11.20 um 22:35 schrieb terryc:
>>
>> Do you have arandr loaded?
> yes => 0.1.9
>
>> This isn't a soluton, but 'works' for me, YMMV.
>> In  xfce -. right click -> Applications -> Settings -> Display
>> Identify the displays.
>> Set which one you want to be the primary.
>> Make sure it the other is not set as primary.
>> Drag each screen around to the L/R, or up/down relation ship you want.
>> Note, depending on the hardware you have, you can also set resolution
>> and refresh rates.
>>
>> What doesn't work for me is the every morning, I then have a pop up
>> that asks e to chose between mirror or extend right, then I have to
>> close two popups.
>>
>> What is in your dual-monitor.sh?
>
> #!/bin/sh
> xrandr --output VGA-1 --mode 1680x1050 --pos 925x1080 --rotate normal
> --output DP-2 --off --output DP-1 --off --output HDMI-1 --primary --mode
> 1920x1080 --pos 0x0 --rotate normal --output HDMI-2 --off
>
> After a long time of trial and error, I now have nearly my settings back.
>
> But, although the HDMI monitor is the primary in "arandr". Is my XFCE
> taskbar on the small monitor (VGA)
>
> If I could teach the XFCE to display the bar only on the primary
> monitor, I would be happy. ;-)
>
> BTW: my VGA "Card" is: VGA compatible controller: Intel Corporation 2nd
> Generation Core Processor Family Integrated Graphics Controller (rev 09)
>
> On my MoBo i have two Outputs: HDMI & VGA
>
> salve
> michael
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng