:: Re: [maemo-leste] [PATCH] Revert "m…
Góra strony
Delete this message
Reply to this message
Autor: Pali Rohár
Data:  
Dla: Faiz Abbas
CC: Peng Fan, u-boot@lists.denx.de, maemo-leste@lists.dyne.org
Stare tematy: Re: [maemo-leste] [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"
Temat: Re: [maemo-leste] [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"
Hello Faiz! Do you need any other details for this issue?

On Friday 14 August 2020 22:16:00 Pali Rohár wrote:
> On Tuesday 11 August 2020 18:27:23 Pali Rohár wrote:
> > On Tuesday 11 August 2020 21:33:19 Faiz Abbas wrote:
> > > Pali,
> > >
> > > On 11/08/20 1:19 pm, Pali Rohár wrote:
> > > > On Tuesday 11 August 2020 08:39:24 Faiz Abbas wrote:
> > > >> Pali, Peng,
> > > >>
> > > >> On 10/08/20 6:25 am, Peng Fan wrote:
> > > >>> Faiz, Jean
> > > >>>
> > > >>>> Subject: [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched
> > > >>>> on and off"
> > > >>>
> > > >>> Got time to take a look?
> > > >>>
> > > >>
> > > >> When this issue was reported in the last thread, Pali said that he was unable to get
> > > >> prints because of the constant reboot loops? Shouldn't it be easy to put while(1)
> > > >> at different points in this execution and see which step causes the reboot loop?
> > > >
> > > > In May in that last thread I wrote details which I was able to gather:
> > > >
> > > >     Month ago I was able to detect that problem is somewhere in function
> > > >     mmc_set_ios() from mmc.c file. I put long debug line prior and also
> > > >     after mmc_set_ios() call. And it was printed only prior. Not after.
> > > >     So I think NULL pointer dereference is in mmc_set_ios() function.

> > > >
> > > > I could try with that while(1) loop to print detailed log message and
> > > > read/capture it. But what information for debugging you need? Or what do
> > > > you want to print which could help you?
> > > >
> > >
> > > You can continue to bisect into omap_hsmmc_set_ios() to see at what point the NULL pointer
> > > gets triggered and what the NULL pointer is.
> >
> > I could try it, but I do not think I would be able to gather more data.
> > I will try to find free time for this debugging on device either at the
> > end of this week or end of next week.
>
> Here are more details. Crash is in omap_hsmmc_stop_clock() function when
> trying to dereference mmc_base->sysctl.
>
> Call trace is:
>
> mmc_set_ios --> mmc->cfg->ops->set_ios --> omap_hsmmc_set_ios --> omap_hsmmc_stop_clock
>
> I applied following diff
>
> diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
> index 715eee0e3e..d4bbfd7b97 100644
> --- a/drivers/mmc/omap_hsmmc.c
> +++ b/drivers/mmc/omap_hsmmc.c
> @@ -22,6 +22,8 @@
> * MA 02111-1307 USA
> */
>
> +#define DEBUG
> +
>  #include <config.h>
>  #include <common.h>
>  #include <cpu_func.h>
> @@ -1335,7 +1337,16 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf,
>  #endif
>  static void omap_hsmmc_stop_clock(struct hsmmc *mmc_base)
>  {
> +    debug("omap_hsmmc_stop_clock: before writel\n");
> +    debug("mmc_base=%p\n", mmc_base);
> +    debug("barrier\n");
> +    asm volatile ("");
> +    debug("mmc_base->sysctl=%x\n", mmc_base->sysctl);
> +    debug("barrier\n");
> +    asm volatile ("");
> +    debug("readl(&mmc_base->sysctl)=%x\n", readl(&mmc_base->sysctl));
>      writel(readl(&mmc_base->sysctl) & ~CEN_ENABLE, &mmc_base->sysctl);
> +    debug("omap_hsmmc_stop_clock: after writel\n");
>  }

>
> static void omap_hsmmc_start_clock(struct hsmmc *mmc_base)
>
> and I see that first word "barrier" is written. There is no
> "mmc_base->sysctl=" string on output display.
>
> If you are interested, mmc_base has value 480b4000.
>
> That is probably all what I can do.
>
> > As I wrote in previous thread, main issue which makes it hard to debug
> > is that this error is not triggered in emulator.
> >
> > > Also can you point to your config file?
> >
> > I'm using standard config file without any modifications. It is:
> > configs/nokia_rx51_defconfig
> >
> > In case you are interested, I'm compiling u-boot by commands:
> >
> > export ARCH=arm
> > export CROSS_COMPILE=arm-linux-gnueabi-
> > make nokia_rx51_config
> > make -j12 u-boot.bin