Am 2020-06-14 13:32, schrieb richard lucassen via Dng:
> It's weird. What does "dmesg" tell?
>
> dmesg > /tmp/dmesg
>
> and look if there are any messages there
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.82+ (root@odroid-stretch64) (gcc
version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT Tue Mar
17 18:33:26 CET 2020
[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000] cma: CMA: reserved 8 MiB at 7f800000
[ 0.000000] On node 0 totalpages: 520192
[ 0.000000] Normal zone: 7112 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 520192 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 12 pages/cpu s19712 r8192 d21248 u49152
[ 0.000000] pcpu-alloc: s19712 r8192 d21248 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 513080
[ 0.000000] Kernel command line:
root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro
consoleblank=0 console=ttyS0,115200n8 console=tty0 no_console_suspend
hdmitx=cecf hdmimode=1080p60hz m_bpp=32 vout= fsck.repair=yes
elevator=noop disablehpd=true max_freq=1536 maxcpus=4
monitor_onoff=false disableuhs=false mmc_removable=true
usbmulticam=false usbhid.quirks=0x0eef:0x0005:0x0004 net.ifnames=0
[ 0.000000] logo: get hdmimode: 1080p60hz
[ 0.000000] dvfs [get_max_freq] - max_freq : 1536000000
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.000000] Memory: 2018152K/2080768K available (8530K kernel code,
906K rwdata, 3120K rodata, 923K init, 4119K bss, 62616K reserved)
[ 0.000000] Virtual kernel memory layout:
vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000
(245759 MB)
vmemmap : 0xffffffbc00000000 - 0xffffffbc01c00000 (
28 MB)
modules : 0xffffffbffc000000 - 0xffffffc000000000 (
64 MB)
memory : 0xffffffc000000000 - 0xffffffc080000000 (
2048 MB)
.init : 0xffffffc001be2000 - 0xffffffc001cc8d00 (
924 kB)
.text : 0xffffffc001080000 - 0xffffffc001be1804 (
11655 kB)
.data : 0xffffffc001cc9000 - 0xffffffc001dabbb0 (
907 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000006] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps
every 2147483648000ns
[ 0.000026] mclk->mux_reg =ffffff8000002990,mclk->reg
=ffffff800000a994
[ 0.000072] local timer MESON TIMER-G mclk->mux_reg
=ffffff8000002990,mclk->reg =ffffff800000c998
[ 0.000095] local timer MESON TIMER-H mclk->mux_reg
=ffffff8000002990,mclk->reg =ffffff800000e99c
[ 0.000116] local timer MESON TIMER-I mclk->mux_reg
=ffffff8000002990,mclk->reg =ffffff80000109a0
[ 0.000127] Switching to timer-based delay loop
[ 0.000358] Console: colour dummy device 80x25
[ 0.000676] console [tty0] enabled
[ 0.003001] allocated 8388608 bytes of page_cgroup
[ 0.003011] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.003028] Calibrating delay loop (skipped), value calculated using
timer frequency.. 2.00 BogoMIPS (lpj=10000)
[ 0.003046] pid_max: default: 32768 minimum: 301
[ 0.003104] Security Framework initialized
[ 0.003131] AppArmor: AppArmor initialized
[ 0.003164] Mount-cache hash table entries: 4096 (order: 3, 32768
bytes)
[ 0.003176] Mountpoint-cache hash table entries: 4096 (order: 3,
32768 bytes)
[ 0.003649] Initializing cgroup subsys memory
[ 0.003724] Initializing cgroup subsys devices
[ 0.003749] Initializing cgroup subsys freezer
[ 0.003764] Initializing cgroup subsys net_cls
[ 0.003781] Initializing cgroup subsys blkio
[ 0.003797] Initializing cgroup subsys perf_event
[ 0.003809] Initializing cgroup subsys net_prio
[ 0.003833] Initializing cgroup subsys hugetlb
[ 0.003844] Initializing cgroup subsys debug
[ 0.003896] ftrace: allocating 30664 entries in 120 pages
[ 0.030888] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7
counters available
[ 0.071902] Meson chip version = RevC (1F:C - 0:0)
[ 0.090840] CPU1: Booted secondary processor
[ 0.110817] CPU2: Booted secondary processor
[ 0.130814] CPU3: Booted secondary processor
[ 0.130856] Brought up 4 CPUs
[ 0.130889] SMP: Total of 4 processors activated.
[ 0.131354] devtmpfs: initialized
[ 0.137315] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.140265] pinctrl core: initialized pinctrl subsystem
[ 0.140527] regulator-dummy: no parameters
[ 0.142853] device-tree: Duplicate name in efusekey, renamed to
"key0#1"
[ 0.142889] device-tree: Duplicate name in efusekey, renamed to
"key1#1"
[ 0.142923] device-tree: Duplicate name in efusekey, renamed to
"key2#1"
[ 0.142956] device-tree: Duplicate name in efusekey, renamed to
"key3#1"
[ 0.144903] NET: Registered protocol family 16
[ 0.145987] register canvas platform driver
[ 0.146003] codec:ignore bus ops for cpu=25
[ 0.146012] codec:ignore bus ops for cpu=29
[ 0.146022] codec:register amports ops for bus[0]
[ 0.146031] codec:register amports ops for bus[4]
[ 0.146040] codec:register amports ops for bus[3]
[ 0.146048] codec:register amports ops for bus[2]
[ 0.146057] codec:register amports ops for bus[1]
[ 0.146065] codec:register amports ops for bus[13]
[ 0.146074] codec:register amports ops for bus[2]
[ 0.146083] codec:register amports ops for bus[14]
[ 0.146115] register rdma platform driver
[ 0.146646] vdso: 2 pages (1 code, 1 data) at base ffffffc001cd2000
[ 0.146689] hw-breakpoint: found 6 breakpoint and 4 watchpoint
registers.
[ 0.147297] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.148484] software IO TLB: mapped [mem 0x7c400000-0x7c800000] (4MB)
[ 0.148500] Serial: AMBA PL011 UART driver
[ 0.148580] hdmitx: system: amhdmitx_init
[ 0.148589] hdmitx: system: Ver: 2014May6
[ 0.148634] tv_vout: tv_init_module
[ 0.148648] tv_vout: major number 254 for disp
[ 0.148658] vout_notify: vout_register_server
[ 0.148666] tv_vout: register tv module server ok
[ 0.148702] codec_mm:codec_mm_module_init
[ 0.149029] gxbb clk HIU base is 0xffffff8000058000
[ 0.149039] gxbb clk ao base is 0xffffff800005a000
[ 0.149087] register mpll_clk_out0 success done
[ 0.149100] register mpll_clk_out1 success done
[ 0.149112] register mpll_clk_out2 success done
[ 0.149311] register sys pll success done
[ 0.149359] clkrate [ xtal ] : 24000000Hz
[ 0.149369] clkrate [ 32Khz ] : 32000Hz
[ 0.149379] clkrate [ clk81 ] : 166666666Hz
[ 0.149388] clkrate [ fixed_pll ] : 2000000000Hz
[ 0.149397] clkrate [ fclk_div2 ] : 1000000000Hz
[ 0.149406] clkrate [ fclk_div3 ] : 666666000Hz
[ 0.149415] clkrate [ fclk_div4 ] : 500000000Hz
[ 0.149424] clkrate [ fclk_div5 ] : 400000000Hz
[ 0.149433] clkrate [ fclk_div7 ] : 285714000Hz
[ 0.149463] gxbb clock initialization complete
[ 0.149506]
msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764
[ 0.150459] amlogic iomap probe done
[ 0.150793] Init pinux probe!
[ 0.151820] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl
driver
[ 0.152163] genirq: Setting trigger mode 8 for irq 241 failed
(gic_set_type+0x0/0x148)
[ 0.152185] genirq: Setting trigger mode 8 for irq 242 failed
(gic_set_type+0x0/0x148)
[ 0.152264] genirq: Setting trigger mode 8 for irq 241 failed
(gic_set_type+0x0/0x148)
[ 0.152284] genirq: Setting trigger mode 8 for irq 242 failed
(gic_set_type+0x0/0x148)
[ 0.152475] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq
1536000000
[ 0.152906] codec:codec map io source 0x00000000c1100000,size=1048576
to 0xffffff8000680000
[ 0.152929] codec:codec map io source 0x00000000c8820000,size=65536
to 0xffffff80000a0000
[ 0.152953] codec:codec map io source 0x00000000c883c000,size=8192 to
0xffffff8000094000
[ 0.152986] codec:codec map io source 0x00000000c8100000,size=1048576
to 0xffffff8000800000
[ 0.153008] codec:codec map io source 0x00000000d0100000,size=262144
to 0xffffff8000980000
[ 0.153029] codec:codec map io source 0x00000000c8838000,size=1024 to
0xffffff800007e000
[ 0.153642] VPU driver version: v01
[ 0.153653] vpu driver detect cpu type: gxbaby
[ 0.153669] load vpu_clk in dts: 666667000Hz(7)
[ 0.153700] vpu_probe OK
[ 0.154096] canvas_probe reg=00000000c8838000,size=400
[ 0.154110] canvas maped reg_base =ffffff800009a000
[ 0.158461] rdma_probe
[ 0.221145] SCSI subsystem initialized
[ 0.221331] usbcore: registered new interface driver usbfs
[ 0.221379] usbcore: registered new interface driver hub
[ 0.221443] usbcore: registered new device driver usb
[ 0.221535] media: Linux media interface: v0.10
[ 0.221574] Linux video capture interface: v2.00
[ 0.221642] pps_core: LinuxPPS API ver. 1 registered
[ 0.221651] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@???>
[ 0.221682] PTP clock support registered
[ 0.221901] logo: logo_init
[ 0.221975] Advanced Linux Sound Architecture Driver Initialized.
[ 0.222336] Bluetooth: Core ver 2.19
[ 0.222367] NET: Registered protocol family 31
[ 0.222378] Bluetooth: HCI device and connection manager initialized
[ 0.222394] Bluetooth: HCI socket layer initialized
[ 0.222408] Bluetooth: L2CAP socket layer initialized
[ 0.222434] Bluetooth: SCO socket layer initialized
[ 0.222459] NetLabel: Initializing
[ 0.222467] NetLabel: domain hash size = 128
[ 0.222476] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.222517] NetLabel: unlabeled traffic allowed by default
[ 0.223243] Switched to clocksource Timer-E
[ 0.255425] AppArmor: AppArmor Filesystem Enabled
[ 0.260860] NET: Registered protocol family 2
[ 0.261386] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.261485] TCP bind hash table entries: 16384 (order: 6, 262144
bytes)
[ 0.261702] TCP: Hash tables configured (established 16384 bind
16384)
[ 0.261775] TCP: reno registered
[ 0.261788] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.261830] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.261980] NET: Registered protocol family 1
[ 0.262191] RPC: Registered named UNIX socket transport module.
[ 0.262201] RPC: Registered udp transport module.
[ 0.262211] RPC: Registered tcp transport module.
[ 0.262219] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.262392] Unpacking initramfs...
[ 0.416092] Freeing initrd memory: 4576K (ffffffc073ab9000 -
ffffffc073f31000)
[ 0.419545] kvm [1]: interrupt-controller@c4304000 IRQ25
[ 0.419709] kvm [1]: kvm_arch_timer: can't find DT node
[ 0.419766] kvm [1]: error initializing Hyp mode: -19
[ 0.420321] audit: initializing netlink subsys (disabled)
[ 0.420367] audit: type=2000 audit(0.400:1): initialized
[ 0.420938] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.426289] VFS: Disk quotas dquot_6.5.2
[ 0.426428] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.428276] NFS: Registering the id_resolver key type
[ 0.428317] Key type id_resolver registered
[ 0.428326] Key type id_legacy registered
[ 0.428346] nfs4filelayout_init: NFSv4 File Layout Driver
Registering...
[ 0.428394] msgmni has been set to 3966
[ 0.429444] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 248)
[ 0.429562] io scheduler noop registered (default)
[ 0.429576] io scheduler deadline registered
[ 0.429678] io scheduler cfq registered
[ 0.430242] meson-rng c8834000.rng: hwrng registered
[ 0.430516] enter cpufreq
[ 0.430548] probe cpufreq okay
[ 0.430674] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq
1536000000
[ 0.431642] aml-thermal aml-sensor@0: min state:500000 400 1 2
[ 0.431813] aml-thermal aml-sensor@0: gpu coef:437, pp:3
[ 0.436869] aml-thermal aml-sensor@0: cdev1 set upper to 3
[ 0.436882] aml-thermal aml-sensor@0: cdev2 set upper to 3
[ 0.436893] aml-thermal aml-sensor@0: cdev0 set upper to 3
[ 0.439482] [drm] Initialized drm 1.1.0 20060810
[ 0.439529] mali-utgard d00c0000.mali: max pp is 3
[ 0.439541] mali-utgard d00c0000.mali: min pp is 3
[ 0.439552] mali-utgard d00c0000.mali: min clk is 4
[ 0.439579] mali-utgard d00c0000.mali: hiu io source
0xffffff80000d2000
[ 0.439600] mali-utgard d00c0000.mali: hiu io source
0xffffff80000d4000
[ 0.439613] mali-utgard d00c0000.mali: num of pp used most of time 3
[ 0.439625] mali-utgard d00c0000.mali: clock dvfs table size is 6
[ 0.439637] mali-utgard d00c0000.mali: max clk set 4
[ 0.439647] mali-utgard d00c0000.mali: max clk is 4
[ 0.439658] mali-utgard d00c0000.mali: turbo clk set to 5
[ 0.439669] mali-utgard d00c0000.mali: turbo clk is 5
[ 0.439681] mali-utgard d00c0000.mali: default clk is 4
[ 0.439748] mali-utgard d00c0000.mali:
====================0====================
clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150,
keep_count=5, threshod=<30 120>, clk_sample=125
[ 0.439776] mali-utgard d00c0000.mali:
====================1====================
clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150,
keep_count=5, threshod=<100 190>, clk_sample=285
[ 0.439803] mali-utgard d00c0000.mali:
====================2====================
clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150,
keep_count=5, threshod=<152 207>, clk_sample=400
[ 0.439829] mali-utgard d00c0000.mali:
====================3====================
clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150,
keep_count=5, threshod=<180 220>, clk_sample=500
[ 0.439855] mali-utgard d00c0000.mali:
====================4====================
clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150,
keep_count=5, threshod=<210 236>, clk_sample=666
[ 0.439881] mali-utgard d00c0000.mali:
====================5====================
clk_freq= 792000000, clk_parent= gp0_pll, voltage=1150,
keep_count=5, threshod=<230 255>, clk_sample=792
[ 0.441533] cdev3 set upper to 2
[ 0.441546] cdev4 set upper to 2
[ 0.441555] gpu cooling register okay with err=0
[ 0.441613] cdev5 set upper to 1
[ 0.441622] gpu core cooling register okay with err=0
[ 0.441786] Mali: Mali device driver loaded
[ 0.441943] UMP: UMP device driver -v3.16.7-11874-g2ddfe869e996
loaded
[ 0.444402] loop: module loaded
[ 0.444700] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.445187] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 0.445197] Ring mode enabled
[ 0.445206] DMA HW capability register supported
[ 0.445215] Normal descriptors
[ 0.445225] RX Checksum Offload Engine supported (type 2)
[ 0.445234] TX Checksum insertion supported
[ 0.445242] Wake-Up On Lan supported
[ 0.445278] Enable RX Mitigation via HW Watchdog Timer
[ 0.452192] libphy: stmmac: probed
[ 0.452215] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[ 0.452227] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[ 0.452516] usbcore: registered new interface driver cdc_ether
[ 0.452585] usbcore: registered new interface driver cdc_ncm
[ 0.452711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 0.452726] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[ 0.452822] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.452891] usbcore: registered new interface driver cdc_acm
[ 0.452901] cdc_acm: USB Abstract Control Model driver for USB modems
and ISDN adapters
[ 0.452956] usbcore: registered new interface driver usb-storage
[ 0.453056] usbcore: registered new interface driver usbserial
[ 0.453089] usbcore: registered new interface driver
usbserial_generic
[ 0.453126] usbserial: USB Serial support registered for generic
[ 0.453572] mousedev: PS/2 mouse device common for all mice
[ 0.453888] i2c /dev entries driver
[ 0.454363] IR Sharp protocol handler initialized
[ 0.454737] device-mapper: uevent: version 1.0.3
[ 0.454948] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30)
initialised: dm-devel@???
[ 0.455259] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.455339] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.455522] usbcore: registered new interface driver usbhid
[ 0.455532] usbhid: USB HID core driver
[ 0.455801] ashmem: initialized
[ 0.455961] ==uart0 reg addr = ffffff80002104c0
[ 0.455990] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225,
base_baud = 1500000) is a meson_uart
[ 1.919447] console [ttyS0] enabled
[ 1.923104] ==uart1 reg addr = ffffff80002124c0
[ 1.927390] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58,
base_baud = 1500000) is a meson_uart
[ 1.976851] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id:
1, phy: c0000020, ctrl: 0
[ 1.982383] dwc_otg: Core Release: 3.10a
[ 1.983609] dwc_otg: Setting default values for core params
[ 1.989126] dwc_otg: curmode: 1, host_only: 1
[ 1.995658] dwc_otg: Using Buffer DMA mode
[ 1.997483] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 2.002571] dwc_otg: Working on port type = HOST
[ 2.007263] dwc_otg dwc2_b: DWC OTG Controller
[ 2.011554] dwc_otg dwc2_b: new USB bus registered, assigned bus
number 1
[ 2.018295] dwc_otg dwc2_b: irq 63, io mem 0x00000000
[ 2.023307] dwc_otg: -------hcd->flags.d32 = 0
[ 2.027706] dwc_otg: Init: Port Power? op_state=1
[ 2.032327] dwc_otg: Init1: Power Port (0)
[ 2.036888] hub 1-0:1.0: USB hub found
[ 2.040108] hub 1-0:1.0: 1 port detected
[ 2.044179] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id:
0, phy: c0000000, ctrl: 0
[ 2.065010] dwc_otg: Core Release: 3.10a
[ 2.065034] dwc_otg: Setting default values for core params
[ 2.068826] dwc_otg: curmode: 1, host_only: 0
[ 2.077350] dwc_otg: Using Buffer DMA mode
[ 2.077374] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 2.082275] dwc_otg: Working on port type = OTG
[ 2.086769] dwc_otg: Current port type: SLAVE
[ 2.091138] dwc_otg dwc2_a: DWC OTG Controller
[ 2.095492] dwc_otg dwc2_a: new USB bus registered, assigned bus
number 2
[ 2.102212] dwc_otg dwc2_a: irq 62, io mem 0x00000000
[ 2.107606] hub 2-0:1.0: USB hub found
[ 2.110926] hub 2-0:1.0: 1 port detected
[ 2.114946] dwc_otg: Dedicated Tx FIFOs mode
[ 2.119200] dwc_otg: using timer detectid change, ffffffc07d661800
[ 2.125283] fb: osd_init_module
[ 2.128384] vout_serve: vout_init_module
[ 2.132205] ge2d: ge2d_init_module
[ 2.135509] ge2d: ge2d_dev major:242
[ 2.139190] ge2d: ge2d clock is 400 MHZ
[ 2.142823] ge2d: ge2d: pdev=ffffffc07d71c800, irq=182,
rstc=0xffffffc07b33a2c0, clk=ffffffc07d702480
[ 2.152044] ge2d: mapped phy: 0xd0160000
[ 2.155860] ge2d: ge2d start monitor
[ 2.159451] ge2d: ge2d workqueue monitor start
[ 2.159577] BLASTER Driver Init
[ 2.159744] secmon has 1 memory regions
[ 2.159784] /secmon: could not find phandle
[ 2.159786] secmon: probe done
[ 2.159887] storage: storage in base: 0xffffffc010000000
[ 2.159888] storage: storage out base: 0xffffffc010040000
[ 2.159890] storage: storage block base: 0xffffffc010080000
[ 2.159891] storage: probe done!
[ 2.160656] aml_sd_emmc_probe: line 2898
[ 2.160659] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning
which caused eMMC data CRC error
[ 2.161033] aml_sd_emmc_reg_init 621
[ 2.161111] pdata->caps 60407
[ 2.161116] pdata->caps2 0
[ 2.161120] get property: ocr_avail, value:0x00200080
[ 2.161122] get property: f_min, value:0x00061a80
[ 2.161125] get property: f_max, value:0x0510ff40
[ 2.161128] get property: max_req_size, value:0x00020000
[ 2.161130] get property: irq_in, value:0x00000003
[ 2.161133] get property: irq_out, value:0x00000005
[ 2.161136] get property: power_level, value:0x00000001
[ 2.161146] get property: gpio_cd, str:
[ 2.161152] get property: gpio_power, str:
[ 2.161153] get property: pinname, str:sd
[ 2.161158] get property: jtag_pin, str:
[ 2.161160] get property: card_type, value:0x00000005
[ 2.161164] get property: gpio_dat3, str:
[ 2.161169] get property: gpio_volsw, str:
[ 2.243316] [aml_is_card_insert]?[0;40;33m card OUT
?[0m
[ 2.243320] dwc_otg: Indeed it is in host mode hprt0 = 00021501
[ 2.263303] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.263343] aml_sd_emmc_probe: line 2898
[ 2.263813] aml_sd_emmc_reg_init 621
[ 2.263903] pdata->caps 80000547
[ 2.263911] pdata->caps2 a1
[ 2.263918] get property: ocr_avail, value:0x00200080
[ 2.263921] get property: f_min, value:0x00061a80
[ 2.263924] get property: f_max, value:0x0bebc200
[ 2.263927] get property: max_req_size, value:0x00020000
[ 2.263934] get property: pinname, str:emmc
[ 2.263937] get property: card_type, value:0x00000001
[ 2.263947] get property: gpio_dat3, str:
[ 2.263952] get property: hw_reset, str:
[ 2.323265] [aml_is_card_insert]?[0;40;33m card OUT
?[0m
[ 2.323265] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.323268] aml_emmc_hw_reset 1356
[ 2.323470] ion_dev has 1 memory regions
[ 2.323518] /ion_dev: could not find phandle
[ 2.323846] codec:[tsync_pcr_init]init success.
[ 2.323894] codec:regist mpeg12 codec profile
[ 2.323940] codec:regist mpeg4 codec profile
[ 2.323947] codec:amvdec_vc1 module init
[ 2.323989] codec:regist vc1 codec profile
[ 2.323996] codec:amvdec_h264 module init
[ 2.324062] codec:regist h264 codec profile
[ 2.324070] codec:amvdec_h264mvc module init
[ 2.324114] codec:regist hmvc codec profile
[ 2.324122] codec:amvdec_h264_4k2k module init
[ 2.324170] codec:regist h264_4k2k codec profile
[ 2.324176] codec:amvdec_h265 module init
[ 2.324218] codec:regist hevc codec profile
[ 2.324263] codec:regist mjpeg codec profile
[ 2.324269] codec:amvdec_real module init
[ 2.324309] codec:regist real codec profile
[ 2.324315] codec:amvdec_avs module init
[ 2.324355] codec:regist avs codec profile
[ 2.324416] amvenc_avc_probe -- reserved memory config fail.
[ 2.324419] amvenc_avc - cma memory pool size: 0 MB
[ 2.324434] encode_wq_init.
[ 2.324441] encode start monitor.
[ 2.324537] encode workqueue monitor start.
[ 2.324779] jpegenc module init
[ 2.324829] jpegenc probe start.
[ 2.324833] jpegenc has 1 memory regions
[ 2.324865] /jpegenc: could not find phandle
[ 2.324868] jpegenc - cma memory pool size: 8 MB
[ 2.324881] jpegenc memory config sucess, buff size is 0x800000,
level: VGA
[ 2.324883] jpegenc_wq_init.
[ 2.324973] jpegenc probe end.
[ 2.325106] switch_vpu_mem_pd: vpu_arb ON
[ 2.325313] tv_vout: tv_set_current_vmode[707]fps_target_mode=10
[ 2.325319] tv_vout: mode is
10,sync_duration_den=1,sync_duration_num=60
[ 2.325327] switch_vpu_mem_pd: vencp ON
[ 2.325332] tv_vout: TV mode 720p60hz selected.
[ 2.325340] tv_vout: new mode =720p60hz set ok
[ 2.325342] vout_serve: vinfo mode is: 720p60hz
[ 2.325402] codec:create_ge2d_work_queue video task ok
[ 2.325705] codec:register clk_set_setting cpu[31]
[ 2.326261] di_module_init ok.
[ 2.326269] di_module_init: major 238
[ 2.326646] efusekeynum: 4
[ 2.326658] efusekeyname: mac offset: 0 size: 6
[ 2.326666] efusekeyname: mac_bt offset: 6 size: 6
[ 2.326673] efusekeyname: mac_wifi offset: 12 size: 6
[ 2.326681] efusekeyname: usid offset: 18 size: 16
[ 2.326910] secmon: secmon share mem in base: 0xffffffc0100fe000
[ 2.326913] secmon: secmon share mem out base: 0xffffffc0100ff000
[ 2.326922] efuse efuse: probe OK!
[ 2.327072] ?6aml_unifykeys_init done!
[ 2.327079] ppmgr module init func called
[ 2.327450] ionvideo-000: V4L2 device registered as video13
[ 2.327464] [dsp]register dsp to char divece(257)
[ 2.327818] amaudio: driver amaudio succuess!
[ 2.327829] amlvideo_init called
[ 2.327830] amlvideo_create_instance called
[ 2.327833] v4l2_dev.name=:amlvideo-000
[ 2.327907] amlvideo-000: V4L2 device registered as video10
[ 2.327916]
VECM init
[ 2.328300] saradc c1108680.saradc: initialized by BL30
[ 2.328304] saradc c1108680.saradc: calibration start:
[ 2.328353] saradc c1108680.saradc: nominal=0, value=0
[ 2.328401] saradc c1108680.saradc: nominal=256, value=251
[ 2.328449] saradc c1108680.saradc: nominal=512, value=508
[ 2.328557] saradc c1108680.saradc: nominal=768, value=765
[ 2.328606] saradc c1108680.saradc: nominal=1023, value=1020
[ 2.328609] saradc c1108680.saradc: calibration end: coef=4080
[ 2.328662] remote: Driver init
[ 2.328921] gpio_key- gpio_key_probe
[ 2.328940] gpio-key c8100000.gpio_keypad: gpio_key: find key_name=0
fail
[ 2.328955] gpio-key: probe of c8100000.gpio_keypad failed with error
-22
[ 2.329082]
?6--------------------------------------------------------
[ 2.329086] ?6odroid_sysfs_init(321) : Sleep Enable !!
[ 2.329087]
?6--------------------------------------------------------
[ 2.329270] input: vt-input as /devices/virtual/input/input0
[ 2.329379] ?6Virtual-Key input driver registered!!
[ 2.330056] enter aml_soc_platform_pcm2bt_probe
[ 2.330366] divider=16,frac=33920000,SDMval=4523
[ 2.330516] enter aml_pcm_dai_probe
[ 2.330570] [aml-spdif-dai]enter aml_dai_spdif_init
[ 2.330628] aml_spdif_probe
[ 2.330750] enter spdif_dit_probe
[ 2.331644] odroid_hdmi_snd odroid_hdmi: dit-hifi <-> I2S mapping ok
[ 2.332671] GACT probability on
[ 2.332688] Mirror/redirect action on
[ 2.332694] u32 classifier
[ 2.332696] Performance counters on
[ 2.332697] input device check on
[ 2.332698] Actions configured
[ 2.332870] TCP: cubic registered
[ 2.332969] NET: Registered protocol family 17
[ 2.333012] NET: Registered protocol family 15
[ 2.333099] Bluetooth: RFCOMM TTY layer initialized
[ 2.333113] Bluetooth: RFCOMM socket layer initialized
[ 2.333134] Bluetooth: RFCOMM ver 1.11
[ 2.333147] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.333149] Bluetooth: BNEP filters: protocol multicast
[ 2.333158] Bluetooth: BNEP socket layer initialized
[ 2.333164] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.333171] Bluetooth: HIDP socket layer initialized
[ 2.333284] NET: Registered protocol family 35
[ 2.333575] Key type dns_resolver registered
[ 2.334274] Registering SWP/SWPB emulation handler
[ 2.334686] registered taskstats version 1
[ 2.334815] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.335313] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 2.335533] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
[ 2.335544] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 2.335691] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
[ 2.335863] rtc_hctosys: unable to open rtc device (rtc0)
[ 2.337194] ?6enter meson_pm_probe!
[ 2.337288] meson_pm_probe done
[ 2.337542] ALSA device list:
[ 2.337545] #0: ODROID-HDMI
[ 2.367057] emmc: BKOPS_EN bit is not set
[ 2.398736] [aml_sd_voltage_switch]?[0;40;32m switch to 1.8V for a
non-uhs device.
?[0m
[ 2.398737] cal[0][0]=9 dly_tmp = 6, temp = 8
[ 2.398739] cal_result[0] = 8280
[ 2.416708] cal[1][0]=9 dly_tmp = 7, temp = 8
[ 2.416710] cal_result[1] = 8160
[ 2.421203] cal[2][0]=9 dly_tmp = 1, temp = 8
[ 2.421204] cal_result[2] = 8880
[ 2.423261] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.423533] dwc_otg: Indeed it is in host mode hprt0 = 00001101
[ 2.434677] cal[3][0]=9 dly_tmp = 5, temp = 8
[ 2.434679] cal_result[3] = 8400
[ 2.450725] cal[4][0]=9 dly_tmp = 6, temp = 8
[ 2.450727] cal_result[4] = 8280
[ 2.455214] cal[5][0]=8 dly_tmp = 1, temp = 7
[ 2.455216] cal_result[5] = 7880
[ 2.470936] cal[6][0]=9 dly_tmp = 6, temp = 8
[ 2.470938] cal_result[6] = 8280
[ 2.475426] cal[7][0]=8 dly_tmp = 1, temp = 7
[ 2.475428] cal_result[7] = 7880
[ 2.475430] max_cal_result =8880
[ 2.475447] emmc: clk 200000000 SDR mode tuning start
[ 2.475824] rx_tuning_result[0][0] = 10
[ 2.476091] rx_tuning_result[0][1] = 10
[ 2.476357] rx_tuning_result[0][2] = 10
[ 2.476622] rx_tuning_result[0][3] = 10
[ 2.476887] rx_tuning_result[0][4] = 10
[ 2.476890] best_win_start =0, best_win_size =5
[ 2.476894] sd_emmc_regs->gclock =0x1000245, sd_emmc_regs->gadjust
=0x2000
[ 2.476897] emmc: gclock =0x1000245, gdelay=0x85854065
[ 2.476899] gadjust=0x2000
[ 2.476993] emmc: new HS200 MMC card at address 0001
[ 2.483375] mmcblk0: emmc:0001 8GND3R 7.28 GiB
[ 2.484233] mmcblk0: p1 p2
[ 2.675087] hub 1-1:1.0: USB hub found
[ 2.675379] hub 1-1:1.0: 4 ports detected
[ 2.953258] usb 1-1.2: new high-speed USB device number 3 using
dwc_otg
[ 3.086941] Freeing unused kernel memory: 920K (ffffffc001be2000 -
ffffffc001cc8000)
[ 3.125545] udevd[105]: starting version 3.2.2
[ 3.126114] random: udevd: uninitialized urandom read (16 bytes read,
63 bits of entropy available)
[ 3.133695] random: udevd: uninitialized urandom read (16 bytes read,
64 bits of entropy available)
[ 3.143510] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 3.148948] scsi0 : usb-storage 1-1.2:1.0
[ 3.154373] udevd[109]: starting eudev-3.2.2
[ 3.180295] random: udevd: uninitialized urandom read (16 bytes read,
72 bits of entropy available)
[ 3.365831] EXT4-fs (mmcblk0p2): mounted filesystem without journal.
Opts: (null)
[ 3.520109] random: nonblocking pool is initialized
[ 3.813443] udevd[294]: starting version 3.2.2
[ 3.845596] udevd[295]: starting eudev-3.2.2
[ 3.913683] gpiomem-meson c8834000.gpiomem: Initialised: Registers at
0xc8834000
[ 3.935593] Driver for 1-wire Dallas network protocol.
[ 4.005678] switch_vpu_mem_pd: viu_vd1 OFF
[ 4.005722] switch_vpu_mem_pd: afbc_dec OFF
[ 4.008298] switch_vpu_mem_pd: di_post OFF
[ 4.012352] switch_vpu_mem_pd: viu_vd2 OFF
[ 4.028855] ionvideo open
[ 4.091158] eth0: device MAC address 00:1e:06:33:fd:62
[ 4.143960] scsi 0:0:0:0: Direct-Access WD Elements 25A3
1021 PQ: 0 ANSI: 6
[ 4.149543] sd 0:0:0:0: [sda] Spinning up disk...
[ 4.150154] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.223258] ionvideo_stop_generating!!!!
[ 4.223317] ionvideo release
[ 4.741377] EXT4-fs (mmcblk0p2): re-mounted. Opts:
errors=remount-ro,discard
[ 5.098673] Adding 524284k swap on /var/swapfile. Priority:-1
extents:11 across:917500k SS
[ 5.163281] ....
[ 9.083561] stmmaceth c9410000.ethernet eth0: Link is Up - 1Gbps/Full
- flow control rx/tx
[ 9.203255] ....
[ 12.940247] NET: Registered protocol family 10
[ 13.243417] ..........ready
[ 22.333767] sd 0:0:0:0: [sda] Very big device. Trying to use READ
CAPACITY(16).
[ 22.336014] sd 0:0:0:0: [sda] 19532808192 512-byte logical blocks:
(10.0 TB/9.09 TiB)
[ 22.343447] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 22.349265] sd 0:0:0:0: [sda] Write Protect is off
[ 22.353368] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08
[ 22.354020] sd 0:0:0:0: [sda] No Caching mode page found
[ 22.358608] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 22.366410] sd 0:0:0:0: [sda] Very big device. Trying to use READ
CAPACITY(16).
[ 22.573153] sda: sda1
[ 22.575846] sd 0:0:0:0: [sda] Very big device. Trying to use READ
CAPACITY(16).
[ 22.579214] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1145.246051] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 2758.012036] TCP: TCPv6: Possible SYN flooding on port 22272. Sending
cookies. Check SNMP counters.
[ 2759.350340] TCP: TCP: Possible SYN flooding on port 22272. Sending
cookies. Check SNMP counters.
::
Re: [DNG] Boot hangs with usb disk …
