:: Re: [DNG] Boot hangs with usb disk …
Página Principal
Delete this message
Reply to this message
Autor: Dr. Nikolaus Klepp
Data:  
Para: dng
Assunto: Re: [DNG] Boot hangs with usb disk active in fstab
Anno domini 2020 Sat, 13 Jun 10:53:51 +0200
J. Fahrner via Dng scripsit:
> Am 2020-06-13 10:31, schrieb richard lucassen:
> > The nofail means that it wil mount automatically, but if the disk
> > is absent it won't give errors. But it does not wait for the device!
>
> The disk has itś own power supply and is always connected. I think there
> is something missing at the boot stage (driver?).
>
> > ok, I assume it's u-boot? In that case you can easily try to boot from
> > another disk. But apparently you do not have access to the device?
>
> I don't know the boot process. I think it's like a Raspberry Pi. There
> is a little FAT partion and a EXT4 root partition on emmc. Since it is
> headless, I only can access it through ssh. When it does not boot I have
> to open it, remove the emmc card, insert it into an adapter and reverse
> my changes on pc.This is very elaborate. So I need a straightforward
> method to isolate the problem.


Don't you have access to a serial port on the device so that you can observe the boot process? Maybe it's stuck at the bootloader stage.

Nik

> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
>




--
Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ...