:: [devuan-dev] bug#195: marked as don…
Página Principal
Delete this message
Reply to this message
Autor: Devuan bug Tracking System
Data:  
Para: Mark Hindley
Assunto: [devuan-dev] bug#195: marked as done (Polkit auth window too long)
Your message dated Mon, 27 Jan 2020 10:03:13 +0000
with message-id <20200127100313.GA32394@???>
and subject line Re: Polkit auth window too long
has caused the Devuan bug report #195,
regarding Polkit auth window too long
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@???
immediately.)


--
195: https://bugs.devuan.org/cgi/bugreport.cgi?bug=195
Devuan Bug Tracking System
Contact owner@??? with problems
Package: policykit-1
Version: 0.105-9+devuan1

This is in a default (out of the box) and up-to-date installation of Devuan Jesse:

[code]
groucho@devuan:~$ uname -a
Linux devuan 3.16.0-5-amd64 #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08) x86_64 GNU/Linux
groucho@devuan:~$
[/code]

Problem:
When I open SPM (synaptic) to check that everything is as it should be, the polkit pop-up auth window that comes up is huge (very long), taking up roughly 28.5cm in length while being only 6.0 cm high.

This is in a 19" monitor running at 1280*1024.
I'd expect a smaller (ie: shorter) image with a 2:1 ratio, like in other distributions with polkit pop-ups.

If I open up a terminal, open SPM to see the polkit pop-up auth window and then run xprop in the terminal+click on the pop-up, I get this information wrt the open window:

[code]

WM_NORMAL_HINTS(WM_SIZE_HINTS):
        program specified minimum size: 973 by 175   <----- min window size
        program specified maximum size: 973 by 175   <----- max window size
        program specified base size: 0 by 0
        window gravity: NorthWest


[/code]

Observe that the min/max window size is roughly the same proportion as the window measured on-screen.

Now, if I do the same in my PCLinux/MATE rig, that part of the xprop data is different *and* does not have the problem my Devuan/Xfce rig has:

[code]

WM_NORMAL_HINTS(WM_SIZE_HINTS):
        program specified minimum size: 416 by 209
        program specified maximum size: 416 by 209
        program specified base size: 0 by 0
        window gravity: NorthWest


[/code]

Please let me know if there's any other data you need.

Apparently there was a similar issue in the MX-17 distro which was 'tricky' to fix but have not been able to find any other related info.

If at all possible, I'd appreciate knowing how-to-fix-this as long as it does not involve recompiling the package. =^D

Thanks in advance,

A.
Control: reassign -1 policykit-1-gnome
Version: 0.105-7

This was fixed in policykit-1-gnome that is in beowulf.

Mark