:: Re: [maemo-leste] N900 off mode
トップ ページ
このメッセージを削除
このメッセージに返信
著者: Tony Lindgren
日付:  
To: Merlijn Wajer
CC: linux-omap, maemo-leste
題目: Re: [maemo-leste] N900 off mode
Hi,

* Merlijn Wajer <merlijn@???> [191209 02:32]:
> I'm trying to figure out how I can try get my Nokia N900 to go into off
> mode.

...

> BTW, the kernel is patched with SGX support, so that may have something
> to do with it, but it seems to actually be idle, if I am reading
> pm_debug/count correctly. [2]


OK that's good to hear :)

> # cat idle.sh
> #!/bin/sh
>
> export UART_IDLE_MS=5000
> idle_uarts() {
>         # Enable autosuspend
>         uarts=$(find /sys/bus/platform/devices/*.serial/power/ -type d)
>         for uart in ${uarts}; do
>                 echo -n ${UART_IDLE_MS} > ${uart}/autosuspend_delay_ms
>                 echo -n enabled > ${uart}/wakeup
>                 echo -n auto > ${uart}/control
>         done

>
>         # Configure wake-up from suspend
>         uarts=$(find /sys/class/tty/tty[SO]*/power/ -type d 2>/dev/null)
>         for uart in ${uarts}; do
>                 echo -n enabled > ${uart}/wakeup
>         done
> }

>
> idle_uarts
>
> mount -t debugfs debugfs /sys/kernel/debug
> echo 1 > /sys/kernel/debug/pm_debug/enable_off_mode


The above should do the right thing.

> [2] # cat /sys/kernel/debug/pm_debug/count
> usbhost_pwrdm
> (ON),OFF:0,RET:670,INA:0,ON:671,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0
> sgx_pwrdm (OFF),OFF:24,RET:0,INA:0,ON:24,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0


Yup sgx_pwrdm above looks good.

> core_pwrdm
> (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0,RET-MEMBANK2-OFF:0
> per_pwrdm (ON),OFF:0,RET:0,INA:0,ON:1,RET-LOGIC-OFF:0,RET-MEMBANK1-OFF:0


Here per_pwrdm has some device(s) blocking idle for both per and core.

Below is my old debug patch that provides more info on the blocking
bits. It's probably some cm_idlest_per bit(s) that's blocking compared
to the known good 00010000 and 00000042 values.

Care to try it and reply with the cm_idlest_per and cm_idlest1_core
values you're seeing?

I've checked that n900 idles fine for me with omap2plus_defconfig
and minimal user space for v5.4.

Regards,

Tony

8< -----------------------
Allows seeing the deeper idle state blockers in
/sys/kernel/debug/pm_debug/count. For example, when
off idle is working on beaglboard xm, this is what
i see:

# sleep 5; cat /sys/kernel/debug/pm_debug/count
...
0006ffff 48005020 (fa005020) cm_idlest_per blocking bits: 00010000
e7ffffbd 48004a20 (fa004a20) cm_idlest1_core blocking bits: 00000042
0000000d 48004a28 (fa004a28) cm_idlest3_core
---
arch/arm/mach-omap2/pm-debug.c | 68 ++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -136,10 +136,78 @@ static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user)
     return 0;
 }


+#include "iomap.h"
+
+struct dregs {
+    const char    *desc;
+    u32        phys;
+    void __iomem    *virt;
+    u32        mask;
+};
+
+#define PER_CM_BASE    0x48005000
+#define PER_CM_REG(name, offset, mask)                \
+    { name, PER_CM_BASE + offset,                \
+    OMAP2_L4_IO_ADDRESS(PER_CM_BASE + offset), mask, }
+
+static struct dregs cm_per[] = {
+    PER_CM_REG("cm_idlest_per", 0x20, 0xfff80000), /* p 513 */
+    { NULL, },
+};
+
+#define CORE_CM_BASE    0x48004a00
+#define CORE_CM_REG(name, offset, mask)                \
+    { name, CORE_CM_BASE + offset,                \
+    OMAP2_L4_IO_ADDRESS(CORE_CM_BASE + offset), mask, }
+
+static struct dregs cm_core[] = {
+    CORE_CM_REG("cm_idlest1_core", 0x20, 0x9c800109), /* p 467 */
+    CORE_CM_REG("cm_idlest3_core", 0x28, 0xfffffffb),
+    { NULL, },
+};
+
+void __dregs_dump(struct dregs *dregs, struct seq_file *s)
+{
+    for (; dregs->desc; dregs++) {
+        u32 val, blockers;
+
+        val = __raw_readl(dregs->virt);
+
+        seq_printf(s, "%08x %08x (%p) %s",
+               val, dregs->phys, dregs->virt,
+               dregs->desc);
+
+        if (dregs->mask) {
+            blockers = ~val;
+            blockers &= ~dregs->mask;
+
+            if (blockers)
+                seq_printf(s, " blocking bits: %08x",
+                       blockers);
+        }
+
+        seq_printf(s, "\n");
+    }
+}
+
+void cm_per_dump(struct seq_file *s)
+{
+    __dregs_dump(cm_per, s);
+}
+
+void cm_core_dump(struct seq_file *s)
+{
+    __dregs_dump(cm_core, s);
+}
+
 static int pm_dbg_counters_show(struct seq_file *s, void *unused)
 {
     pwrdm_for_each(pwrdm_dbg_show_counter, s);
     clkdm_for_each(clkdm_dbg_show_counter, s);
+    if (cpu_is_omap34xx()) {
+        cm_per_dump(s);
+        cm_core_dump(s);
+    }


     return 0;
 }
-- 
2.24.0