:: Re: [DNG] Booting devuan on a rasbe…
Top Pagina
Delete this message
Reply to this message
Auteur: hal
Datum:  
Aan: s@po, Arnt Karlsen
CC: dng
Onderwerp: Re: [DNG] Booting devuan on a rasberry pi


On 7/11/19 3:02 PM, s@po wrote:

>
> If you had already tried,
> The best Option, would be to try to fix sdcard frequency to start with a fix *Default* speed and then try to Boot-Up..
> This value bellow is the default( its what I have in my Board since the beguining... I am an Early Owner :) )
>
> In /boot/config.txt
> # First try with initial emmc clock of 50Mhz... ( should be the default .. but still, try to force it..you could have a diferent sdcard.. )
> init_emmc_clock (50000000)
>
> After that, if can't boot, please give us some bootup data like previously :)
>
> Good Luck,
> Regards
>


Hello,
Thank you. Here is the boot output from
devuan_ascii_2.0.0_armel_raspi1.img.xz and setting emmc clock to 50Mhz
in config.txt

The same sdcard will boot my Raspi A+ fine so maybe it's hardware?

https://pastebin.com/gtcVxqRd