:: Re: [DNG] Install failure: cannot b…
トップ ページ
このメッセージを削除
このメッセージに返信
著者: Rod Rodolico
日付:  
To: dng
題目: Re: [DNG] Install failure: cannot boot netinst
There is absolutely no reason to believe the two are related, but I ran
into a similar issue installing OPNSense (a FreeBSD firewall,
https://opnsense.org/) on a Protectli device. I'm just making a wild
guess, so don't expect much.

What had to be done on that is to set the see if there is a Boot option
filter and, if so, set it to "UEFI only" and see what happens.

Sorry if I send you on a "wild goose chase" but, while the hardware and
operating systems are different, the symptoms are very similar. The
screen "goes away" during install.

The original article is at
https://protectli.com/kb/how-to-install-opnsense-on-the-vault/
with detailed instructions for the vault (their name for their device)
are at:
https://protectli.com/kb/how-to-configure-uefi-on-the-vault/

They are using American Megatrends BIOS version 2.18.1263

Rod

On 05/29/2019 02:51 PM, Blair, Charles E III via Dng wrote:
> I am sorry, I have both mis-stated the
> problem I am having and misunderstood some
> of the suggestions.
>
>    I have burnt the netinst file for "ASCII" to a CD
> and attempted to boot it on a recently purchased
> Intel NUC (I disabled "Secure Boot" to get past one
> warning).  The result is a screen that is blank
> except for a (non-blinking) cursor in the upper
> left corner.  Either the installer does not get
> started or the monitor is unable to process the
> installer output.  The CD reader, at least for
> a few minutes, makes noises suggesting it is trying
> to read the CD.

>
>    I tried to follow some suggestions from Intel:

>
> https://www.intel.com/content/www/us/en/support/articles/000030985/mini-pcs.html
>
>    I was able to get as far as the "Performance"
> and "Graphics" sections of the bios menu (their
> first suggestion), but could not see anything to
> disable "InteliGD" --- there was only something
> to change "Dynamic Frequency Setting."

>
>    Their last suggestion, involving a "phantom
> display" seemed promising, but I was unable to
> find (from windows 10) anything to adjust this.

>
>    Thanks for any further ideas!
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng

>


--
Rod Rodolico
Daily Data, Inc.
POB 140465
Dallas TX 75214-0465 US
http://dailydata.net
214.827.2170