:: Re: [DNG] WAIT_ONLINE_METHOD=none
トップ ページ
このメッセージを削除
このメッセージに返信
著者: Dr. Nikolaus Klepp
日付:  
To: dng
題目: Re: [DNG] WAIT_ONLINE_METHOD=none
Anno domini 2019 Mon, 18 Feb 14:51:03 +0100
Didier Kryn scripsit:
> Le 18/02/2019 à 14:07, Dr. Nikolaus Klepp a écrit :
> > Comming back to the original issue: I tested ifplugd - which turned out to be not very reliable, but worked at least some hours. Now I tested "netplugd". The result is not verry promising: eudev logged the plug-event immediately, but netplugd sometimes took a break for 5 minutes ore more to detect that the cable was plugged in.
>
>     Eudev should react to the detection of the eth interface and create
> the device. It isn't supposed to react to carrier detection (cable
> connected). And, of course, the device should exist prior to
> ifplugd/netplug to detect the carrier.
>
>     What kind of ethernet interface do you have? Is it some external
> device connected through usb ?


It's the built-in ethernet of T60/T61 laptops. This is what "dmesg" says (cable plugged in, device booted. Then cable detatched (232.150573), cable reattached (236.562619) and detached again (764.652272) - same to be found in /var/log/messages:

[ 57.202695] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 57.202873] e1000e 0000:01:00.0 eth0: 10/100 speed: disabling TSO
[ 232.150573] e1000e: eth0 NIC Link is Down
[ 232.465673] e1000e: eth0 NIC Link is Down
[ 234.126681] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 234.126860] e1000e 0000:01:00.0 eth0: 10/100 speed: disabling TSO
[ 234.850510] e1000e: eth0 NIC Link is Down
[ 236.562619] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 236.562797] e1000e 0000:01:00.0 eth0: 10/100 speed: disabling TSO
[ 764.652272] e1000e: eth0 NIC Link is Down
[ 768.674596] e1000e 0000:01:00.0 eth0: MAC Wakeup cause - Link Status Change
[ 769.121767] e1000e: eth0 NIC Link is Down
[ 769.397761] e1000e: eth0 NIC Link is Down
[ 769.741891] e1000e: eth0 NIC Link is Down

What I do not understand: In my understanding "udevadm monitor" should print all events, not only the events it has rules for. But it does not print anything of these plug/unplug events. What's the point I am missing?

Nik

>
>         Didier
>
>
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
>




--
Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ...