:: Re: [DNG] 3.4.9 rtai kernel?
Top Pagina
Delete this message
Reply to this message
Auteur: Dr. Nikolaus Klepp
Datum:  
Aan: dng
Onderwerp: Re: [DNG] 3.4.9 rtai kernel?
Am Samstag, 5. Januar 2019 schrieb Arnt Karlsen:
> On Sat, 5 Jan 2019 14:07:21 +0100, Dr. wrote in message
> <201901051407.21071.dr.klepp@???>:
>
> > Am Samstag, 5. Januar 2019 schrieb Arnt Karlsen:
> > > On Sat, 5 Jan 2019 04:13:22 -0500, Steve wrote in message
> > > <20190105041322.13e04671@???>:
> > >
> > > > Hi all,
> > > >
> > > > Someone asked whether you can run a 3.4.9 rtai kernel on Devuan.
> > > > So I'm asking here.
> > >
> > > ..why an old a 3.4.9 rtai kernel and not e.g.
> > > linux-image-4.18.0-0.bpo.3-rt-amd64, now at version 4.18.20-2~bpo9+1
> > > with PREEMPT, RT etc?
> > >
> > >
> >
> > PREEMPT-RT gives absolutely horrible latency figures on older
> > hardware and amd64 (this is from a T60): RTAI ~ 2000ns, RT ~ 150000ns
> > on the same hardware, with latency spikes now and then of up to 5
> > seconds (again, depending on individual hardware, even seamingly
> > identical systems do not give consistent results). The latest
> > linuxcnc-patched PREEMPT still gives ~ 20000ns on the same hardware,
> > that's ~ 10 times worse than RTAI. Additionall, when running 2
> > realtime threads, RTAI gives a reliable latency over different
> > baseperiods. On Linuxcnc that means that latency of the servothread
> > at 1000000ns and the basthread of ZZZ ns (default 25000, but usually
> > you adjust it to be just 20% longer than the measured latency) are
> > independent. With PREEMPT that's not the case: Latency spikes
> > erratic, depending on the ratio servoperiode to baseperiode and the
> > airpressure in the vally of the kings. when baseperiode 25000 gives a
> > latency of 10000 then on RTAI you could savely run a baseperiode of
> > 12000. On PREEMPT you most likely will lock your system doing the
> > same. Even worse, enlarging the baseperiode to 30000 does not
> > guarnatee that the latency stays the same or gets better, just on the
> > contrary: it can spike up to 100000, and a baseperiode of 50000 might
> > give again 10000 latency. This behavour is most irritating and points
> > to a well hidden bug just waiting to suck your blood and time or ruin
> > your parts. If you get a RTAI kernel working for your system, you
> > will definitly want to stick with it. With PREEMPT you are on the
> > "interesting" side of live.
>
> ..there is _some_ improvement on the PREEMPT-RT side:
> http://linuxgizmos.com/real-time-linux-explained/
>


At the speed PREEMPT-RT improves we'll stick with 3.X kernels on linuxcnc for a long, long, time :-/


--
Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ...