:: Re: [DNG] ifstat.eth0 on Boot
Góra strony
Delete this message
Reply to this message
Autor: Didier Kryn
Data:  
Dla: dng
Temat: Re: [DNG] ifstat.eth0 on Boot
Le 12/12/2018 à 13:58, Dr. Nikolaus Klepp a écrit :
> Am Dienstag, 11. Dezember 2018 schrieb Gonzalo Pérez de Olaguer Córdoba:
>> Hi Michael K.
>>
>> El Fri, 7 Dec 2018 12:45:11 +0100
>> "Michael K." <michael@???> escribió:
>>
>>> After a Dev1 Setup on a Laptop (whit eth0), i have to wait a long time
>>> for the eth0 on "cold boot".
>>>
>>> I "cold boot" my Laptop
>>> I look to the "Boot Messages"
>>> I see the following Msg:
>>>
>>> Configuring Network Interfaces ifup: Waiting for Lock on
>>> /run/network/ifstat.eth0
>>>
>>> After 2 or 3 minutes to wait, the Laptop boot up,
>> Just in case this could help, I've been having this same *symptom*
>> on KVM virtual machines running ascii.
>>
>> My situation was eth0 being configured through DHCP and using the
>> dhcp client from the isc-dhcp-client package, which sends (maybe buggy)
>> DHCPDECLINE packets.
>>
>> My workaround was to replace isc-dhcp-client with pump.
>>
>> If you want more details, tell me and I will continue writing.
>>
>> Bye,
>> Salo.
>>
> Now this is a neet tick! It also solves the issue that booting hangs on the said message when no network cable is attached to eth0.
>
> Nik
>

    Is it as simple as apt-get remove isc-dhcp-client; apt-get install
pump ?


                Didier