On 05/17/2018 10:37 AM, Adam Borowski wrote:
> On Thu, May 17, 2018 at 05:32:06AM +0300, Lars Noodén wrote:
>> Typo aside, wouldn't that need to point to the serial console instead
>> and add, speed, parity, and word size?
>>

>>     console=ttyS0,19200n8

>
> Doesn't this default to 115200n8 these days?

The console will run at the speed you set it to run at within the limits
of your hardware. Some hardware handles 115200 bps some hardware does
not. Some might only handle speeds in between, such as 38400 bps. Best
to start low to get things working first and then ramp up later until
you hit errors.

/Lars