:: Re: [DNG] Switching to OpenRC
Startseite
Nachricht löschen
Nachricht beantworten
Autor: Didier Kryn
Datum:  
To: dng@lists.dyne.org
Betreff: Re: [DNG] Switching to OpenRC
Le 15/05/2018 à 18:53, Martin Steigerwald a écrit :
> Didier Kryn - 15.05.18, 14:26:
>> Le 15/05/2018 à 13:23, Martin Steigerwald a écrit :
>>> wirelessduck@??? - 14.05.18, 02:52:
>>>> I’ve read that the ascii RC has optional support for OpenRC.How
>>>> can I switch to this on an existing system to try it out?
>>>>
>>>> Is it simply a matter of running “apt-get install openrc”?
>>> This basically did it for me. But this warning has been unhelpful
>>> for me:
>>>
>>> %:/var/lib/dpkg/info# grep -A 2 "sysv" *openrc*
>>> openrc.postinst:        echo "*** WARNING: if you are replacing
>>> sysv-rc by OpenRC, then you must ***" openrc.postinst-        echo
>>> "*** reboot immediately using the following command:
>>> ***" openrc.postinst-        echo 'for file in /etc/rc0.d/K*; do
>>> s=`basename $(readlink "$file")` ; /etc/init.d/$s stop; done'
>> ...

>>
>>> What this did on my system is: Stop all services and then sit there.
>>       That's what this long command exactly means: for every init
>> script which is to be stopped at shutdown (those with a symlink with
>> a K prefix), execute the stop command. There's just an error in the
>> postinst message, because it says that would also perform the reboot.
> That is what I thought to. But then there was also this postinst
> message.

>
>>>    It
>>> did not reboot. I asked a co-worker to reboot the machine via the
>>> hypervisor and it worked.
>>       You could as well send the command 'reboot'
> Not after SSH was gone.

    Sure. I missed that point.
>
> But you mean instead of this loop I could have used reboot? Then why is
> this postinst message there to begin with?

    No. Reboot would fail because it wouldn't be able to stop the
services. It seems you have to sit in front of the computer to be able
to switch from sysv to openrc (and vice-versa). Or to connect to it via
some backdoor of your own, not managed by init scripts. Or use some
behated management engine (IPMI).

        Didier