:: Re: [DNG] Error when updating ascii…
Startseite
Nachricht löschen
Nachricht beantworten
Autor: Ismael L. Donis Garcia
Datum:  
To: dng
Betreff: Re: [DNG] Error when updating ascii 32 bit
root@(none):~# apt-get purge udev
Leyendo lista de paquetes... Hecho
Creando árbol de dependencias
Leyendo la información de estado... Hecho
Los siguientes paquetes se ELIMINARÁN:
udev*
0 actualizados, 0 nuevos se instalarán, 1 para eliminar y 0 no actualizados.
Se liberarán 8.192 B después de esta operación.
¿Desea continuar? [S/n] s
(Leyendo la base de datos ... 207462 ficheros o directorios instalados
actualmente.)
Desinstalando udev (1:3.2.2+devuan2.10) ...
(Leyendo la base de datos ... 207459 ficheros o directorios instalados
actualmente.)
Purgando ficheros de configuración de udev (1:3.2.2+devuan2.10) ...
root@(none):~# apt-get upgrade
Leyendo lista de paquetes... Hecho
Creando árbol de dependencias
Leyendo la información de estado... Hecho
Calculando la actualización... Hecho
0 actualizados, 0 nuevos se instalarán, 0 para eliminar y 0 no actualizados.
root@(none):~#

Best Regards
--
Ismael
----- Original Message -----
From: "Olaf Meeuwissen" <paddy-hack@???>
To: "KatolaZ" <katolaz@???>
Cc: <dng@???>
Sent: Sunday, March 18, 2018 8:02 AM
Subject: Re: [DNG] Error when updating ascii 32 bit


> Hi,
>
> Saw the same on ascii amd64 yesterday, trying to upgrade eudev from
> 3.2.2-11 to 3.2.2-12.
>
> KatolaZ writes:
>
>> On Sat, Mar 17, 2018 at 02:56:03PM -0400, Ismael L. Donis Garcia wrote:
>>> When updating my system I get the following error of which I have not
>>> the
>>> slightest idea how to solve:
>>>
>>> Configurando eudev (3.2.2-12) ...
>>> insserv: script eudev: service udev already provided!
>>> [ ok ] Stopping the hotplug events dispatcher: udevd.
>>> [ ok ] Starting the hotplug events dispatcher: udevd.
>>>
>>> *******************************************************
>>>  Warning: eudev will default to the older network
>>>  interface names, such as eth0 or wlan0. If you use
>>>  the new names, such as enp0s3, you will need to add
>>>  the following to the boot command:
>>>                net.ifnames=1
>>> ********************************************************

>>>
>>> update-initramfs: deferring update (trigger activated)
>>> insserv: script eudev: service udev already provided!
>>> insserv: exiting now!
>>> update-rc.d: error: insserv rejected the script header
>>> dpkg: error al procesar el paquete eudev (--configure):
>>> el subproceso instalado el script post-installation devolvió el código
>>> de
>>
>> You have a previous version of "udev" in /etc/init.d/, or a link to
>> eudev named "udev" in there. That was a required fix for a previous
>> problem that has been solved, Just remove the udev file (or link) and
>>
>> apt-get upgrade
>>
>> again.
>
> I found /etc/init.d/udev and /etc/init.d/udev-finis files, not links.
> According to `dpkg -S etc/init.d/udev` they belong to the udev package
> (1:3.2.2+devuan2.10) so I purged that. This didn't remove any other
> packages because eudev provides udev. This also did *not* remove the
> files in /etc/init.d.
>
> During the `apt-get purge udev`, I saw:
>
>  dpkg: udev: dependency problems, but removing anyway as you requested:
>   bluez depends on udev (>= 170-1); however:
>    Package udev is to be removed.
>    Package eudev which provides udev is not configured yet.
>   [...]

>
> (Reading database ... 129383 files and directories currently installed.)
> Removing udev (1:3.2.2+devuan2.10) ...
> Setting up eudev (3.2.2-12) ...
> insserv: script eudev: service udev already provided!
> [ ok ] Stopping the hotplug events dispatcher: udevd.
> [ ok ] Starting the hotplug events dispatcher: udevd.
>
>  *******************************************************
>    Warning: eudev will default to the older network
>    interface names, such as eth0 or wlan0. If you use
>    the new names, such as enp0s3, you will need to add
>    the following to the boot command:
>                  net.ifnames=1
>  ********************************************************

>
> update-initramfs: deferring update (trigger activated)
> insserv: script eudev: service udev already provided!
> insserv: exiting now!
> update-rc.d: error: insserv rejected the script header
> dpkg: error processing package eudev (--configure):
> subprocess installed post-installation script returned error exit status
> 1
> Errors were encountered while processing:
> eudev
>
> After the purge, I still had a /var/lib/dpgk/info/udev.list that
> contained:
>
> /etc/modprobe.d/fbdev-blacklist.conf
> /etc/init/udev.conf
> /etc/init/udev-finish.conf
> /etc/init/udevtrigger.conf
> /etc/init/udevmonitor.conf
> /etc/init/udev-fallback-graphics.conf
> /etc/init.d/udev
> /etc/init.d/udev-finish
>
> and all of these files still existed on my system. I ran
>
> for f in `cat /var/lib/dpkg/info/udev.list`; do sudo rm $f; done
> sudo rm /var/lib/dpkg/info/udev.list
> sudo dpkg --configure eudev
>
> and that allowed eudev to configure itself without error.
>
> I realize that ascii is not quite ready for release yet, but I do
> believe that the (e)udev installation scripts should provide users with
> a *smooth* upgrade.
>
> Hope this helps and keep up the good work,
> --
> Olaf Meeuwissen, LPIC-2            FSF Associate Member since 2004-01-27
> GnuPG key: F84A2DD9/B3C0 2F47 EA19 64F4 9F13  F43E B8A4 A88A F84A 2DD9
> Support Free Software                        https://my.fsf.org/donate
> Join the Free Software Foundation              https://my.fsf.org/join
> _______________________________________________
> Dng mailing list
> Dng@???
> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng

>