:: Re: [DNG] ascii an waiting for dhcp…
トップ ページ
このメッセージを削除
このメッセージに返信
著者: Didier Kryn
日付:  
To: dng
題目: Re: [DNG] ascii an waiting for dhcp on boot
Le 29/11/2017 à 08:38, Dr. Nikolaus Klepp a écrit :
> Hi!
>
> When bootin ascii and eth0 is present and configured as dhcp and eth0 is not connected to a network, then the boot process is blocked at ~ 1 minute at the stage where eth0 is configured. This is quite anoying and did not happen on jessie. Is there an easy way to get the old behaviour (i.e. background dhcp request) back on ascii?
>


    Sorry to reply by this triviality: did you check
/etc/network/interfaces ?

    If you have 'auto eth0' , then it might explain the wait.
    Normally, if the cable is meant to be unplugged/replugged, you
should have
    'allow-hotplug eth0' instead.

    Didier