On 07/05/2017 11:36 AM, Alessandro Selli wrote:
> On Wed, 5 Jul 2017 at 10:57:51 +0300
> Lars Noodén <lars.nooden@???> wrote:
>
>> I had been using Ethernet over USB on Ascii until yesterday or so. Now
>> the device no longer shows up, even though it is still connected.
>> Wireless works, for the time being, but I'd like to get back to using
>> Ethernet. What should I be looking at?
>
> First thing is verifying that the USB adapter is recognized. You can do
> that running lsusb.

Thanks. I don't have lsusb output from before when it was working for a
baseline. Would it be Device 003 below?

$ lsusb
Bus 002 Device 002: ID 05e3:0612 Genesys Logic, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 090c:037c Silicon Motion, Inc. - Taiwan (formerly
Feiya Technology Corp.) 300k Pixel Camera
Bus 001 Device 004: ID 8087:0a2a Intel Corp.
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129
Card Reader Controller
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Regards,
Lars